Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2503.16880

Measurements on Time Resolution of BGO, PWO and BSO Crystals

Zhiyu Zhao·Dejing Du·Yong Liu·Jiyuan Chen·Junfeng Chen·Fangyi Guo·Shu Li·Baohua Qi
View original source ↗Read source document ↗Export metadata ↓

Abstract

A high-granularity crystal calorimeter (HGCCAL) has been proposed for the future Circular Electron Positron Collider (CEPC). This study investigates the time resolution of various crystal - Silicon Photomultiplier (SiPM) detection units for HGCCAL, focusing on Bismuth Germanate (BGO), Lead Tungstate (PWO), and Bismuth Silicon Oxide (BSO) crystals. Beam tests were conducted using 10 GeV pions at CERN and 5 GeV electrons at DESY, enabling systematic comparisons of timing performance under both minimum ionizing particle (MIP) signals and electromagnetic (EM) showers. Three timing methods - constant fraction timing (CFT) with sampled points, linear fitting, and exponential fitting - were evaluated, with an exponential fit combined with a 10% constant fraction providing the best time resolution. Measurements of crystal units with different dimensions revealed that both scintillation light yield and signal rise time influence timing performance. Among similarly sized crystals, PWO exhibited the best time resolution due to its fast signal rise time, while BGO and BSO demonstrated comparable timing performance. For long BGO bars (40 cm and 60 cm), the time resolution remained uniform along their length, achieving approximately 0.75 ns and 0.95 ns for MIP signals. Under intense EM showers, both bars reached a timing resolution of approximately 200 ps at high amplitudes. And the presence of upstream pre-shower layers can introduce additional timing fluctuations at similar amplitudes.

Explore related subjects

physics.ins-dethep-ex

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Zhiyu Zhao, Dejing Du, Yong Liu, Jiyuan Chen, Junfeng Chen, Fangyi Guo, Shu Li, Baohua Qi. 2025-03-21. Measurements on Time Resolution of BGO, PWO and BSO Crystals. https://arxiv.org/abs/2503.16880

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det↗
arXiv2026

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det↗
arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗