Search arXivSearch

arXiv · 2505.20012

Hybrid RIS-Enhanced ISAC Secure Systems: Joint Optimization in the Presence of an Extended Target

Abstract

Unlike the conventional fully-passive and fully-active reconfigurable intelligent surfaces (RISs), a hybrid RIS consisting of active and passive reflection units has recently been concerned, which can exploit their integrated advantages to alleviate the RIS-induced path loss. In this paper, we investigate a novel security strategy where the multiple hybrid RIS-aided integrated sensing and communication (ISAC) system communicates with downlink users and senses an extended target synchronously. Assuming imperfectly known target location (TL), we consider the joint design of the transmit signal and receive filter bank of the base station (BS), the receive beamformers of all users and the weights of the hybrid RIS. An optimization problem is formulated for maximizing the worst-case sensing signal-to-interference-plus-noise-ratio (SINR) subject to secure communication and system power budget constraints. To address this non-convex problem, we leverage generalized fractional programming (GFP) and penalty-dual-decomposition (PDD), and propose a security solution that efficiently optimizes all variables by employing convex optimization approaches. Simulation results show that by incorporating the multiple hybrid RIS into the optimization design, the extended target detection and secure transmission performance of ISAC systems are improved over the state-of-the-art RIS-aided ISAC approaches.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yu Yao, Junhao Zhang, Pu Miao, Long Zhang, Gaojie Chen, Feng Shu, Kai-Kit Wong. 2025-05-26. Hybrid RIS-Enhanced ISAC Secure Systems: Joint Optimization in the Presence of an Extended Target. https://arxiv.org/abs/2505.20012

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det