Search arXivSearch

arXiv · 2508.07424

Effective toughness estimation by FFT based phase field fracture: application to composites and polycrystals

Abstract

An estimate of the effective toughness of heterogeneous materials is proposed based on the Phase Field Fracture model implemented in an FFT homogenization solver. The estimate is based on the simulation of the deformation of representative volume elements of the microstructure, controlled by a constant energy dissipation rate using an arc-length type control. The definition of the toughness corresponds to the total energy dissipated after the total fracture of the RVE -- which can be accurately obtained thanks to the dissipation control -- divided by the RVE transverse area (length in 2D). The proposed estimate accounts for both the effect of heterogeneity in toughness and elastic response on the overall fracture energy and allows as well to account for phases with anisotropic elastic and fracture response (fracture by cleavage). To improve toughness predictions, crack-tip enrichment is used to model initial cracks. The method is applied to obtain the effective toughness of composites and elastic polycrystals in a series of examples. In the two types of materials, it is found that both heterogeneity in elastic response and fracture energy contribute to increase the effective toughness. Microscopically, it is found that toughening mechanisms are related to the passage of the crack through tougher phases and deviation of the crack path. It is also found that the latter is the controlling mechanism for cases with marked heterogeneity and high anisotropy, eventually provoking toughening saturation for sufficiently high values of heterogeneity or anisotropy.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pedro Aranda, Javier Segurado. 2025-08-10. Effective toughness estimation by FFT based phase field fracture: application to composites and polycrystals. https://arxiv.org/abs/2508.07424

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Incommensurate structural and magnetic modulations in potassium-rich cryptomelane, K$_x$Mn$_8$O$_{16}$ ($x\approx1.45$)

Cryptomelane is a hollandite-like material consisting of K$^+$ cations in an $α$-MnO$_2$ tunnel-like crystallographic motif. Cryptomelane with stoichiometry K$_x$Mn$_8$O$_{16}$ ($x\approx1.45$) has been synthesized and its magnetic properties investigated using variable-temperature magnetic susceptibility, heat capacity, and neutron powder diffraction. Three distinct transitions at $T_1=184$\,K, $T_2=54.5$\,K, and $T_3=24$\,K are observed. At $T_1$ there is a subtle tetragonal$\rightarrow$monoclinic transition associated with emergence of a set of non-magnetic superstructure peaks indexable to a $\vec{k}_\mathrm{struc}\approx0.74\vec{c^*}$ incommensurate modulation parallel to the $α$-MnO$_2$ tunnels. Our findings are consistent with a relation previously reported in titanate hollandites, that $x\approx2|\vec{k}_\mathrm{struc}|$. Magnetic Bragg peaks emerge below $T_2=54.5$\,K, and their positions indicate an incommensurate modulated magnetic structure. The model consistent with the data is a dual-$\vec{k}_\mathrm{mag}$ structure with a ferromagnetic $|\vec{k}_\mathrm{mag}|=0$ component and an incommensurate $\vec{k}_\mathrm{mag}\approx0.37\vec{c^*}$, with the latter most likely to be helical. The period of oscillation of the incommensurate magnetic component is in line with predictions based on a Heisenberg spin Hamiltonian [Mandal \textit{et al}. Phys. Rev. B 90, 104420 (2014)]. Below $T_3=24$\,K, there is a magnetic transition, which gives rise to a different set of magnetic Bragg peaks indicative of a highly complex magnetic structure.

cond-mat.mtrl-sci

An anisotropic functional for two-dimensional material systems

Density function theory is the workhorse of modern electronic structure theory. However, its accuracy in practical calculations is limited by the choice of the exchange-correlation potential. In this respect, two-dimensional materials pose a special challenge, as all these materials and their heterostructures have a crucial similarity. The underlying atomic structures are strongly spatially inhomogeneous, implying that current exchange-correlation functionals, that in almost all cases are isotropic, are ill-prepared for an accurate description. We present an anisotropic screened-exchange potential, that remedies this problem and reproduces the band-gap of 2D materials as well as the piecewise linearity of the total energy with fractional occupation number.

cond-mat.mtrl-sci

Thermally-driven reorientation of the Néel vector in altermagnetic MnTe

Altermagnets are novel magnetic systems that possess a spin-polarized electronic band structure without a net magnetic moment, making them promising for device applications. Hexagonal MnTe, a prototypical altermagnet, arguably exhibits the most properties consistent with theoretical predictions, including an anomalous Hall effect despite a vanishing net magnetization, and altermagnetinduced electronic band splitting. However, fundamental questions remain, including why some effects only appear significantly below the magnetic ordering temperature. Here, we resolve this discrepancy by revealing a reorientation of the Néel vector in single-crystalline MnTe. The Néel vector points 30° from the a-axis at low $T$, before aligning directly with the a-axis around $T\simeq 260$ K. We attribute this to single-ion anisotropy, which depends on temperature-dependent lattice parameters. We obtained these results using muon-spin spectroscopy, magnetization measurements, and X-ray diffraction; we show that the findings are consistent with neutron diffraction. Manipulating this effect, for example through strain, could unlock sensitive electronic detection schemes for external stimuli, paving the way for functional altermagnetic devices.

cond-mat.mtrl-sci