Search arXivSearch

arXiv · 2606.25680

Average-Power-Budgeted Underwater Vehicle Control via Constrained Reinforcement Learning

Abstract

Underwater vehicles operate from a fixed onboard energy budget that propulsion rapidly depletes, so a controller that completes its task while drawing less thruster power directly extends mission range and endurance. Reinforcement learning yields capable model-free controllers for station-keeping and trajectory tracking, but optimizing task accuracy alone drives the policy toward oscillatory, energy-wasting actuation. The established remedy subtracts an energy penalty from the reward, yet this sets the task-power trade-off through a single weight with no physical units: a target power level cannot be specified, the weight must be re-tuned for every vehicle and task, and a mismatched weight can even raise power. This paper instead formulates energy-efficient underwater control as a constrained Markov decision process in which average thruster power is subject to an explicit budget, solved with a PPO-Lagrangian algorithm. The power level is set by declaring a budget in physical units, and a single dual variable is updated online to meet it for each vehicle and task, without manual weight search. Across three vehicles and four tasks in the MarineGym simulator, the energy-constrained policy draws the least power in all twelve settings, reducing it by 14--65\% (up to 64.9\%) over a task-only baseline and below an energy-reward baseline everywhere, while remaining the smoothest in ten settings and preserving task accuracy except in one deliberately power-limited regime. Imposing energy as an explicit constraint thus offers a tuning-free route to energy-efficient underwater control that needs no per-vehicle, per-task weight search.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yinuo Wang, Gavin Tao, Yuze Liu, John V. Ringwood. 2026-07-11. Average-Power-Budgeted Underwater Vehicle Control via Constrained Reinforcement Learning. https://arxiv.org/abs/2606.25680

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO