Search arXiv⌕ Search

arXiv · 2610.01183

Additive solid immersion lenses for enhanced collection efficiency of shallow NV centers by pulsed laser deposition and structurization of high-k amorphous oxides

Abstract

The negatively charged nitrogen-vacancy ($\mathrm{NV}^-$) defect in diamond can be used for quantum information processing via the readout of the radiative decay of the excited state into the ground state. The large refractive index mismatch of diamond and air causes low photon extraction efficiency due to total internal reflection losses. Here, we investigate the photon extraction numerically and report additive solid immersion lenses (SILs) consisting of the high-k dielectric yttria-stabilized-zirconia (YSZ) for surface modification and enhanced light extraction of shallow implanted nitrogen-vacancy centers. We demonstrate an average increase of 63% in saturation intensity using a scalable bottum up room temperature pulsed laser deposition and photolithography structurization process. The average necessary laser intensity for saturation is reduced by 33% by the SILs.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Michael S. Bar, Nicole Raatz, Max Kneiss, Andreas Koenig, Marius Grundmann, Holger von Wenckstern. 2026-10-01. Additive solid immersion lenses for enhanced collection efficiency of shallow NV centers by pulsed laser deposition and structurization of high-k amorphous oxides. https://arxiv.org/abs/2610.01183

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Investigation of Fe-Ag and Ag-Fe Interfaces in Ag-57Fe-Ag trilayer Using Nuclear Resonance Scattering under X-ray Standing Wave Conditions

Understanding the interfaces of layered nanostructures is key to optimizing their structural and magnetic properties for the desired functionality. In the present work, the two interfaces of a few nm thick Fe layer in Ag-57Fe-Ag trilayers are studied with a depth resolution of a fraction of a nanometer using x-ray standing waves (XSWs) generated by an underlying [W-Si]x10 multilayer (MLT) at an x-ray incident angle around the Bragg peak of the MLT. Interface selectivity in Ag-57Fe-Ag trilayers was achieved by moving XSW antinodes across the interfaces by optimizing suitable incident angles and performing depth-resolved nuclear resonance scattering (NRS) and X-ray fluorescence (XRF) measurements for magnetic and structural properties. The combined analysis revealed that the rms roughness of 57Fe-on-Ag and Ag-on-57Fe interfaces are not equal. The roughness of the 57Fe-on-Ag interface is 9.7 Angstrom, while that of the Ag-on-57Fe interface is 6.4 Angstrom. 57Fe isotope sensitive NRS revealed that hyperfine field (HFF) at both interfaces of 57Fe-on-Ag and Ag-on-57Fe interfaces are distinct, which is consistent with the difference in interface roughnesses measured as root mean square (RMS) roughness. Thermal annealing induces 57Fe diffusion into the Ag layer, and annealing at 325 C transforms the sample into a paramagnetic state. This behavior is attributed to forming 57Fe nanoparticles within the Ag matrix, exhibiting a paramagnetic nature. These findings provide deep insights into interface properties crucial for developing advanced nanostructures and spintronic devices.

cond-mat.mtrl-sci↗

Strain-induced Dynamic Spin-Phonon Coupling in Epitaxial RuO2 Films

Magnetic order parameters in altermagnets can couple to quantized lattice vibration via both piezomagnetic and magnetoelastic effects, leading to the renormalization of phonon dispersion. Here, we demonstrate photo-induced dynamic frequency modulation of THz phonons excited in anisotropically-strained epitaxial RuO2 thin films using ultrafast coherent phonon spectroscopy and time-resolved magneto-optic Kerr effect measurement. A coherent oscillation of a transverse acoustic phonon appears in the sub-THz range with increasing film thickness above 4 nm due to local dislocation arising from the anisotropic strain relaxation, which hosts large non-zero shear strain. Interestingly, this phonon mode exhibits a time-varying mode hardening below ~ 500 K. Furthermore, an optical phonon oscillation emerges in magnetization dynamics of the photo-induced non-equilibrium state, and it becomes significantly softened near the critical temperature, while there is no observable magneto-optic signal in fully-strain-relaxed films. Such notable dynamic frequency modulations in acoustic and optical phonons offer an opportunity to manipulate phonons in the THz range through the spin-phonon coupling controlled by epitaxial design, which can inspire the new class of altermagnetic applications in the ultrafast quantum opto-spintronics.

cond-mat.mtrl-sci↗

Al$_{1-x}$Hf$_{x}$N Thin Films with Enhanced Piezoelectric Responses for GHz Surface Acoustic Wave Devices

Ternary compounds obtained by alloying wurtzite AlN with transition metals have emerged as promising materials with significantly enhanced piezoelectric characteristics relative to binary AlN. The increased electromechanical coupling in these compounds boosts the performance of high-frequency acoustic devices. So far, progress has largely focused on Al$_{1-x}$Sc$_x$N, which is costly and poorly compatible with complementary metal-oxide-semiconductor (CMOS) technologies. Here, we investigate aluminum hafnium nitride (Al$_{1-x}$Hf$_{x}$N) as a scalable and potentially CMOS-compatible alternative to Al$_{1-x}$Sc$_x$N. Using reactive co-sputtering on both Si and sapphire substrates, we demonstrate wurtzite Al$_{1-x}$Hf$_{x}$N thin films ($x \leq 0.17$) with strong $c$-axis texture and nearly isotropic lattice expansion upon Hf incorporation. X-ray absorption spectroscopy indicates cross-gap hybridization between N 2$p$ and Hf 5$d$ states, which can enhance the Born effective charge and, thereby, the piezoelectric response. Correspondingly, we observe a multifold enhancement in the piezoelectric coefficient, $d_{33}$, relative to AlN, despite increasing structural disorder in Al$_{1-x}$Hf$_{x}$N. Building on this finding, we demonstrate Al$_{1-x}$Hf$_{x}$N GHz surface acoustic wave (SAW) resonators that exhibit enhanced performance, as well as efficient excitation of bulk acoustic waves with low propagation losses. These results establish Al$_{1-x}$Hf$_{x}$N as a promising platform for next-generation high-frequency electromechanical devices, with prospects for further piezoelectric enhancements through improved epitaxy.

cond-mat.mtrl-sci↗