Search arXiv⌕ Search

arXiv · 2610.06487

Traversability-Aware Cooperative Path Planning for Human-UGV Casualty Evacuation

Abstract

Heterogeneous multi-robot path planning is a well-studied problem in which agents with disparate kinematic and dynamic models must coordinate to achieve shared objectives. These formulations, however, treat all agents as robotic-their cost models are mechanical and their traversability is sensor-derived. In human-robot teaming, the human partner remains relegated to command and supervisory roles rather than being modeled as a physical co-navigator with distinct mobility constraints and dynamic energy reserves. This work investigates joint path planning for a two-agent human-UGV team in search-and-rescue casualty retrieval scenarios. We model the human agent using the Pandolf-Santee metabolic cost model with fatigue-modulated speed, and the UGV using a rolling-resistance energy model with terrain-dependent speed limits. By exploiting the complementary traversability of each agent-the human's ability to traverse dense vegetation and shallow water versus the UGV's superior speed on open terrain and roads-we optimize casualty transfer locations, termed switch points, to minimize total mission time. Evaluated across multiple synthetic 1km2 environments with procedurally generated elevation and land-cover data, the optimized strategy reduces mean mission time by 5.3% relative to a human-only baseline and by 7.0% relative to a naive human-UGV strategy without switch point optimization, while reducing human energy expenditure by 17.8% relative to baseline. Notably, the naive strategy reduces human energy expenditure by a larger margin (22.4%) but incurs a 2% increase in mission time relative to baseline, illustrating that switch point optimization is necessary to realize time savings from human-UGV teaming.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kristian Dalland, Prithvi Poddar, Souma Chowdhury, Karthik Dantu, Ehsan T. Esfahani. 2026-10-05. Traversability-Aware Cooperative Path Planning for Human-UGV Casualty Evacuation. https://arxiv.org/abs/2610.06487

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

A Three-Stage Offline SDRE-Based Control Framework for Human Motion Reproduction on a Suspended Bipedal Robot

This paper presents a three-stage offline command generation framework for reproducing human lower-limb motion on a suspended bipedal robot while matching torque trajectories computed from the robot dynamic model. First, State-Dependent Riccati Equation (SDRE) control derives the reference torque trajectory for the measured motion. Second, parameterized optimization converts this trajectory into trapezoidal joint velocity commands under motor speed and acceleration limits. Third, a proportional-integral-derivative linear quadratic regulator (PID-LQR) compensation scheme refines these commands using experimental tracking data. The platform executes the resulting profiles to reproduce human walking and squatting motions recorded by a Vicon system, allowing evaluation of tracking accuracy and repeatability. Results show that the average root mean square error (RMSE) and standard deviation (STD) of joint angles across repeated trials remain below 7° and 0.33°, respectively. Joint angle and torque trajectory comparisons show lower maximum RMSE and STD values than those for MPC and IPSO-PID in every reported case. The framework enables accurate and repeatable motion reproduction within actuator limits, providing controlled and measurable conditions that can reduce reliance on human participation and associated risks during preliminary evaluation of devices for assistive walking, gait training, and rehabilitation.

cs.RO↗

LHM-Humanoid: Long-Horizon Human Motion Control for Continuous Object Transport in Cluttered Scenes

Physics-based human motion control can make a simulated character walk, sit, and manipulate objects with high physical realism. Almost always, though, this happens in short, isolated clips that are re-initialized between interactions. We instead aim for continuous, reset-free long-horizon motion: a physically simulated humanoid that repeatedly walks to a displaced object, lifts it with a balanced whole-body posture, carries it past obstacles, and places it at a goal, over and over within a single uninterrupted take. The hard part is not any individual motion but the transitions between them. Without a reset, each cycle must end in a state that both leaves the object just placed undisturbed and lets the next cycle begin, yet every placement leaves the character off-balance in a non-canonical pose where naive end-to-end reinforcement learning fails. Our key idea is to treat this handoff as a two-sided problem of recoverability: the character must disengage from the object it just placed so the prior success is preserved, and settle into a state from which a balanced continuation exists. Instead of engineering a transition by hand, we learn to shape where each cycle ends so that it lands in this recoverable region. We introduce LHM-Humanoid. One goal-conditioned controller completes a fetch--carry--place cycle and, through a learned release-and-retreat behavior, steers its terminal state into this region; a second controller then takes over from the resulting state distribution. Both are regularized by an adversarial motion prior and distilled into a single goal-conditioned policy that runs the whole sequence as one reset-free rollout. Across 350 cluttered layouts spanning four room types, LHM-Humanoid produces far more successful and stable long-horizon motion than end-to-end RL, hierarchical RL, and prior physics-based human-scene-interaction methods, on both seen and unseen scenes.

cs.RO↗

Learning from Hallucinating Critical Points for Navigation in Dynamic Environments

Generating large and diverse obstacle datasets to learn motion planning in environments with dynamic obstacles is challenging due to the vast space of possible obstacle trajectories. Inspired by hallucination-based data synthesis approaches, we propose Learning from Hallucinating Critical Points (LfH-CP), a self-supervised framework for creating rich dynamic obstacle datasets based on existing optimal motion plans without requiring expensive expert demonstrations or trial-and-error exploration. LfH-CP factorizes hallucination into two stages: first identifying when and where obstacles must appear in order to result in a near-optimal motion plan, i.e., the critical points, and then procedurally generating diverse trajectories that pass through these points while avoiding collisions. This factorization avoids generative failures such as mode collapse and ensures coverage of diverse dynamic behaviors. We further introduce a diversity metric to quantify dataset richness and show that LfH-CP produces substantially more varied training data than existing baseline. Experiments in simulation demonstrate that planners trained on a LfH-CP generated dataset achieves higher success rates compared to a prior hallucination method.

cs.RO↗