arXiv subjects

Ahmed Alkhateeb

Publications and source records attributed to Ahmed Alkhateeb.

At least 145 records · Page 8Linked to original sources

arXiv2019

DeepMIMO: A Generic Deep Learning Dataset for Millimeter Wave and Massive MIMO Applications

Machine learning tools are finding interesting applications in millimeter wave (mmWave) and massive MIMO systems. This is mainly thanks to their powerful capabilities in learning unknown models and tackling hard optimization problems. To advance the machine learning research in mmWave/massive MIMO, however, there is a need for a common dataset. This dataset can be used to evaluate the developed algorithms, reproduce the results, set benchmarks, and compare the different solutions. In this work, we introduce the DeepMIMO dataset, which is a generic dataset for mmWave/massive MIMO channels. The DeepMIMO dataset generation framework has two important features. First, the DeepMIMO channels are constructed based on accurate ray-tracing data obtained from Remcom Wireless InSite. The DeepMIMO channels, therefore, capture the dependence on the environment geometry/materials and transmitter/receiver locations, which is essential for several machine learning applications. Second, the DeepMIMO dataset is generic/parameterized as the researcher can adjust a set of system and channel parameters to tailor the generated DeepMIMO dataset for the target machine learning application. The DeepMIMO dataset can then be completely defined by the (i) the adopted ray-tracing scenario and (ii) the set of parameters, which enables the accurate definition and reproduction of the dataset. In this paper, an example DeepMIMO dataset is described based on an outdoor ray-tracing scenario of 18 base stations and more than one million users. The paper also shows how this dataset can be used in an example deep learning application of mmWave beam prediction.

cs.IT↗

arXiv2018

Leveraging mmWave Imaging and Communications for Simultaneous Localization and Mapping

In this work, we propose a novel approach for high accuracy user localization by merging tools from both millimeter wave (mmWave) imaging and communications. The key idea of the proposed solution is to leverage mmWave imaging to construct a high-resolution 3D image of the line-of-sight (LOS) and non-line-of-sight (NLOS) objects in the environment at one antenna array. Then, uplink pilot signaling with the user is used to estimate the angle-of-arrival and time-of-arrival of the dominant channel paths. By projecting the AoA and ToA information on the 3D mmWave images of the environment, the proposed solution can locate the user with a sub-centimeter accuracy. This approach has several gains. First, it allows accurate simultaneous localization and mapping (SLAM) from a single standpoint, i.e., using only one antenna array. Second, it does not require any prior knowledge of the surrounding environment. Third, it can locate NLOS users, even if their signals experience more than one reflection and without requiring an antenna array at the user. The approach is evaluated using a hardware setup and its ability to provide sub-centimeter localization accuracy is shown.

cs.IT↗

arXiv2018

Generative Adversarial Estimation of Channel Covariance in Vehicular Millimeter Wave Systems

Enabling highly-mobile millimeter wave (mmWave) systems is challenging because of the huge training overhead associated with acquiring the channel knowledge or designing the narrow beams. Current mmWave beam training and channel estimation techniques do not normally make use of the prior beam training or channel estimation observations. Intuitively, though, the channel matrices are functions of the various elements of the environment. Learning these functions can dramatically reduce the training overhead needed to obtain the channel knowledge. In this paper, a novel solution that exploits machine learning tools, namely conditional generative adversarial networks (GAN), is developed to learn these functions between the environment and the channel covariance matrices. More specifically, the proposed machine learning model treats the covariance matrices as 2D images and learns the mapping function relating the uplink received pilots, which act as RF signatures of the environment, and these images. Simulation results show that the developed strategy efficiently predicts the covariance matrices of the large-dimensional mmWave channels with negligible training overhead.

cs.IT↗

arXiv2018

Beamforming in Millimeter Wave Systems: Prototyping and Measurement Results

Demonstrating the feasibility of large antenna array beamforming is essential for realizing mmWave communication systems. This is due to the dependency of these systems on the large array beamforming gains to provide sufficient received signal power. In this paper, the design of a proof-of-concept prototype that demonstrates these gains in practice is explained in detail. We develop a mmWave system with digitally controlled analog front-end. The developed prototype uses 60 GHz phased arrays and universal software radio peripheral (USRP) controllers. The software interface of our design is easily reproducible and can be leveraged for future mmWave prototypes and demonstrations.

cs.IT↗

arXiv2018

Machine Learning for Reliable mmWave Systems: Blockage Prediction and Proactive Handoff

The sensitivity of millimeter wave (mmWave) signals to blockages is a fundamental challenge for mobile mmWave communication systems. The sudden blockage of the line-of-sight (LOS) link between the base station and the mobile user normally leads to disconnecting the communication session, which highly impacts the system reliability. Further, reconnecting the user to another LOS base station incurs high beam training overhead and critical latency problems. In this paper, we leverage machine learning tools and propose a novel solution for these reliability and latency challenges in mmWave MIMO systems. In the developed solution, the base stations learn how to predict that a certain link will experience blockage in the next few time frames using their past observations of adopted beamforming vectors. This allows the serving base station to proactively hand-over the user to another base station with a highly probable LOS link. Simulation results show that the developed deep learning based strategy successfully predicts blockage/hand-off in close to 95% of the times. This reduces the probability of communication session disconnection, which ensures high reliability and low latency in mobile mmWave systems.

cs.IT↗

arXiv2017

Millimeter Wave Energy Harvesting

The millimeter wave (mmWave) band, which is a prime candidate for 5G cellular networks, seems attractive for wireless energy harvesting. This is because it will feature large antenna arrays as well as extremely dense base station (BS) deployments. The viability of mmWave for energy harvesting though is unclear, due to the differences in propagation characteristics such as extreme sensitivity to building blockages. This paper considers a scenario where low-power devices extract energy and/or information from the mmWave signals. Using stochastic geometry, analytical expressions are derived for the energy coverage probability, the average harvested power, and the overall (energy-and-information) coverage probability at a typical wireless-powered device in terms of the BS density, the antenna geometry parameters, and the channel parameters. Numerical results reveal several network and device level design insights. At the BSs, optimizing the antenna geometry parameters such as beamwidth can maximize the network-wide energy coverage for a given user population. At the device level, the performance can be substantially improved by optimally splitting the received signal for energy and information extraction, and by deploying multi-antenna arrays. For the latter, an efficient low-power multi-antenna mmWave receiver architecture is proposed for simultaneous energy and information transfer. Overall, simulation results suggest that mmWave energy harvesting generally outperforms lower frequency solutions.

cs.IT↗

arXiv2016

Channel Estimation for Hybrid Architecture Based Wideband Millimeter Wave Systems

Hybrid analog and digital precoding allows millimeter wave (mmWave) systems to achieve both array and multiplexing gain. The design of the hybrid precoders and combiners, though, is usually based on knowledge of the channel. Prior work on mmWave channel estimation with hybrid architectures focused on narrowband channels. Since mmWave systems will be wideband with frequency selectivity, it is vital to develop channel estimation solutions for hybrid architectures based wideband mmWave systems. In this paper, we develop a sparse formulation and compressed sensing based solutions for the wideband mmWave channel estimation problem for hybrid architectures. First, we leverage the sparse structure of the frequency selective mmWave channels and formulate the channel estimation problem as a sparse recovery in both time and frequency domains. Then, we propose explicit channel estimation techniques for purely time or frequency domains and for combined time/frequency domains. Our solutions are suitable for both SC-FDE and OFDM systems. Simulation results show that the proposed solutions achieve good channel estimation quality, while requiring small training overhead. Leveraging the hybrid architecture at the transceivers gives further improvement in estimation error performance and achievable rates.

cs.IT↗

arXiv2016

Hybrid Architectures with Few-Bit ADC Receivers: Achievable Rates and Energy-Rate Tradeoffs

Hybrid analog/digital architectures and receivers with low-resolution analog-to-digital converters (ADCs) are two low power solutions for wireless systems with large antenna arrays, such as millimeter wave and massive MIMO systems. Most prior work represents two extreme cases in which either a small number of RF chains with full-resolution ADCs, or low resolution ADC with a number of RF chains equal to the number of antennas is assumed. In this paper, a generalized hybrid architecture with a small number of RF chains and finite number of ADC bits is proposed. For this architecture, achievable rates with channel inversion and SVD based transmission methods are derived. Results show that the achievable rate is comparable to that obtained by full-precision ADC receivers at low and medium SNRs. A trade-off between the achievable rate and power consumption for different numbers of bits and RF chains is devised. This enables us to draw some conclusions on the number of ADC bits needed to maximize the system energy efficiency. Numerical simulations show that coarse ADC quantization is optimal under various system configurations. This means that hybrid combining with coarse quantization achieves better energy-rate trade-off compared to both hybrid combining with full-resolutions ADCs and 1-bit ADC combining.

cs.IT↗

arXiv2016

Multi-Layer Precoding: A Potential Solution for Full-Dimensional Massive MIMO Systems

Massive multiple-input multiple-output (MIMO) systems achieve high sum spectral efficiency by offering an order of magnitude increase in multiplexing gains. In time division duplexing systems, however, the reuse of uplink training pilots among cells results in additional channel estimation error, which causes downlink inter-cell interference, even when large numbers of antennas are employed. Handling this interference with conventional network MIMO techniques is challenging due to the large channel dimensionality. Further, the implementation of large antenna precoding/combining matrices is associated with high hardware complexity and power consumption. In this paper, we propose multi-layer precoding to enable efficient and low complexity operation in full-dimensional massive MIMO, where a large number of antennas is used in two dimensions. In multi-layer precoding, the precoding matrix of each base station is written as a product of a number of precoding matrices, each one called a layer. Multi-layer precoding (i) leverages the directional characteristics of large-scale MIMO channels to manage inter-cell interference with low channel knowledge requirements, and (ii) allows for an efficient implementation using low-complexity hybrid analog/digital architectures. We present a specific multi-layer precoding design for full-dimensional massive MIMO systems. The performance of this precoding design is analyzed and the per-user achievable rate is characterized for general channel models. The asymptotic optimality of the proposed multi-layer precoding design is then proved for some special yet important channels. Numerical simulations verify the analytical results and illustrate the potential gains of multi-layer precoding compared to traditional pilot-contaminated massive MIMO solutions.

cs.IT↗

arXiv2016

Frequency Selective Hybrid Precoding for Limited Feedback Millimeter Wave Systems

Hybrid analog/digital precoding offers a compromise between hardware complexity and system performance in millimeter wave (mmWave) systems. This type of precoding allows mmWave systems to leverage large antenna array gains that are necessary for sufficient link margin, while permitting low cost and power consumption hardware. Most prior work has focused on hybrid precoding for narrowband mmWave systems, with perfect or estimated channel knowledge at the transmitter. MmWave systems, however, will likely operate on wideband channels with frequency selectivity. Therefore, this paper considers wideband mmWave systems with a limited feedback channel between the transmitter and receiver. First, the optimal hybrid precoding design for a given RF codebook is derived. This provides a benchmark for any other heuristic algorithm and gives useful insights into codebook designs. Second, efficient hybrid analog/digital codebooks are developed for spatial multiplexing in wideband mmWave systems. Finally, a low-complexity yet near-optimal greedy frequency selective hybrid precoding algorithm is proposed based on Gram-Schmidt orthogonalization. Simulation results show that the developed hybrid codebooks and precoder designs achieve very good performance compared with the unconstrained solutions while requiring much less complexity.

cs.IT↗

arXiv2016

Dynamic Subarrays for Hybrid Precoding in Wideband mmWave MIMO Systems

Hybrid analog/digital precoding architectures can address the trade-off between achievable spectral efficiency and power consumption in large-scale MIMO systems. This makes it a promising candidate for millimeter wave systems, which require deploying large antenna arrays at both the transmitter and receiver to guarantee sufficient received signal power. Most prior work on hybrid precoding focused on narrowband channels and assumed fully-connected hybrid architectures. MmWave systems, though, are expected to be wideband with frequency selectivity. In this paper, a closed-form solution for fully-connected OFDM-based hybrid analog/digital precoding is developed for frequency selective mmWave systems. This solution is then extended to partially-connected but fixed architectures in which each RF chain is connected to a specific subset of the antennas. The derived solutions give insights into how the hybrid subarray structures should be designed. Based on them, a novel technique that dynamically constructs the hybrid subarrays based on the long-term channel characteristics is developed. Simulation results show that the proposed hybrid precoding solutions achieve spectral efficiencies close to that obtained with fully-digital architectures in wideband mmWave channels. Further, the results indicate that the developed dynamic subarray solution outperforms the fixed hybrid subarray structures in various system and channel conditions.

cs.IT↗

arXiv2016

Modeling and Analyzing Millimeter Wave Cellular Systems

We provide a comprehensive overview of mathematical models and analytical techniques for millimeter wave (mmWave) cellular systems. The two fundamental physical differences from conventional Sub-6GHz cellular systems are (i) vulnerability to blocking, and (ii) the need for significant directionality at the transmitter and/or receiver, which is achieved through the use of large antenna arrays of small individual elements. We overview and compare models for both of these factors, and present a baseline analytical approach based on stochastic geometry that allows the computation of the statistical distributions of the downlink signal-to-interference-plus-noise ratio (SINR) and also the per link data rate, which depends on the SINR as well as the average load. There are many implications of the models and analysis: (a) mmWave systems are significantly more noise-limited than at Sub-6GHz for most parameter configurations; (b) initial access is much more difficult in mmWave; (c) self-backhauling is more viable than in Sub-6GHz systems which makes ultra-dense deployments more viable, but this leads to increasingly interference-limited behavior; and (d) in sharp contrast to Sub-6GHz systems cellular operators can mutually benefit by sharing their spectrum licenses despite the uncontrolled interference that results from doing so. We conclude by outlining several important extensions of the baseline model, many of which are promising avenues for future research.

cs.IT↗

arXiv2016

Gains of Restricted Secondary Licensing in Millimeter Wave Cellular Systems

Sharing the spectrum among multiple operators seems promising in millimeter wave (mmWave) systems. One explanation is the highly directional transmission in mmWave, which reduces the interference caused by one network on the other networks sharing the same resources. In this paper, we model a mmWave cellular system where an operator that primarily owns an exclusive-use license of a certain band can sell a restricted secondary license of the same band to another operator. This secondary network has a restriction on the maximum interference it can cause to the original network. Using stochastic geometry, we derive expressions for the coverage and rate of both networks, and establish the feasibility of secondary licensing in licensed mmWave bands. To explain economic trade-offs, we consider a revenue-pricing model for both operators in the presence of a central licensing authority. Our results show that the original operator and central network authority can benefit from secondary licensing when the maximum interference threshold is properly adjusted. This means that the original operator and central licensing authority have an incentive to permit a secondary network to restrictively share the spectrum. Our results also illustrate that the spectrum sharing gains increase with narrow beams and when the network densifies.

cs.IT↗

arXiv2016

Initial Beam Association in Millimeter Wave Cellular Systems: Analysis and Design Insights

Enabling the high data rates of millimeter wave (mmWave) cellular systems requires deploying large antenna arrays at both the basestations and mobile users. The beamforming weights of these large arrays need to be tuned to guarantee sufficient beamforming gains. Prior work on coverage and rate of mmWave cellular networks focused mainly on the case when basestations and mobile users beamfomring vectors are perfectly designed for maximum beamforming gains. Designing beamforming/combining vectors, though, requires training which may impact both the SINR coverage and rate of mmWave cellular systems. This paper characterizes and evaluates the performance of mmWave cellular networks while accounting for the beam training/association overhead. First, a model for the initial beam association is developed based on beam sweeping and downlink control pilot reuse. To incorporate the impact of beam training into system performance, a new metric, called the effective reliable rate, is defined and adopted. Using stochastic geometry, the effective reliable rate of mmWave cellular networks is derived for two special cases: with near-orthogonal control pilots and with full pilot reuse. Analytical and simulation results provide insights into the answers of three important questions: (i) What is the impact of beam association on mmWave network performance? (ii) Should orthogonal or reused control pilots be employed in the initial beam association phase? (iii) Should exhaustive or hierarchical search be adopted for the beam training phase? The results show that unless the employed beams are very wide or the system coherence block length is very small, exhaustive search with full pilot reuse is nearly as good as perfect beam alignment.

cs.IT↗

arXiv2016

Massive MIMO Combining with Switches

Massive multiple-input multiple-output (MIMO) is expected to play a central role in future wireless systems. The deployment of large antenna arrays at the base station and the mobile users offers multiplexing and beamforming gains that boost system spectral efficiency. Unfortunately, the high cost and power consumption of components like analog-to-digital converters makes assigning an RF chain per antenna and applying typical fully digital precoding/combining solutions difficult. In this paper, a novel architecture for massive MIMO receivers, consisting of arrays of switches and constant (non-tunable) phase shifters, is proposed. This architecture applies a quasi-coherent combining in the RF domain to reduce the number of required RF chains. An algorithm that designs the RF combining for this architecture is developed and analyzed. Results show that the proposed massive MIMO combining model can achieve a comparable performance to the fully-digital receiver architecture in single-user and multi-user massive MIMO setups.

cs.IT↗

arXiv2016

Gram Schmidt Based Greedy Hybrid Precoding for Frequency Selective Millimeter Wave MIMO Systems

Hybrid analog/digital precoding allows millimeter wave MIMO systems to leverage large antenna array gains while permitting low cost and power consumption hardware. Most prior work has focused on hybrid precoding for narrow-band mmWave systems. MmWave systems, however, will likely operate on wideband channels with frequency selectivity. Therefore, this paper considers frequency selective hybrid precoding with RF beamforming vectors taken from a quantized codebook. For this system, a low-complexity yet near-optimal greedy algorithm is developed for the design of the hybrid analog/digital precoders. The proposed algorithm greedily selects the RF beamforming vectors using Gram-Schmidt orthogonalization. Simulation results show that the developed precoding design algorithm achieves very good performance compared with the unconstrained solutions while requiring less complexity.

cs.IT↗

arXiv2015

Hybrid MIMO Architectures for Millimeter Wave Communications: Phase Shifters or Switches?

Hybrid analog/digital MIMO architectures were recently proposed as an alternative for fully-digitalprecoding in millimeter wave (mmWave) wireless communication systems. This is motivated by the possible reduction in the number of RF chains and analog-to-digital converters. In these architectures, the analog processing network is usually based on variable phase shifters. In this paper, we propose hybrid architectures based on switching networks to reduce the complexity and the power consumption of the structures based on phase shifters. We define a power consumption model and use it to evaluate the energy efficiency of both structures. To estimate the complete MIMO channel, we propose an open loop compressive channel estimation technique which is independent of the hardware used in the analog processing stage. We analyze the performance of the new estimation algorithm for hybrid architectures based on phase shifters and switches. Using the estimated, we develop two algorithms for the design of the hybrid combiner based on switches and analyze the achieved spectral efficiency. Finally, we study the trade-offs between power consumption, hardware complexity, and spectral efficiency for hybrid architectures based on phase shifting networks and switching networks. Numerical results show that architectures based on switches obtain equal or better channel estimation performance to that obtained using phase shifters, while reducing hardware complexity and power consumption. For equal power consumption, all the hybrid architectures provide similar spectral efficiencies.

cs.IT↗

arXiv2015

Compressed Sensing Based Multi-User Millimeter Wave Systems: How Many Measurements Are Needed?

Millimeter wave (mmWave) systems will likely employ directional beamforming with large antenna arrays at both the transmitters and receivers. Acquiring channel knowledge to design these beamformers, however, is challenging due to the large antenna arrays and small signal-to-noise ratio before beamforming. In this paper, we propose and evaluate a downlink system operation for multi-user mmWave systems based on compressed sensing channel estimation and conjugate analog beamforming. Adopting the achievable sum-rate as a performance metric, we show how many compressed sensing measurements are needed to approach the perfect channel knowledge performance. The results illustrate that the proposed algorithm requires an order of magnitude less training overhead compared with traditional lower-frequency solutions, while employing mmWave-suitable hardware. They also show that the number of measurements need to be optimized to handle the trade-off between the channel estimate quality and the training overhead.

cs.IT↗