arXiv subjects

Ahmed Alkhateeb

Publications and source records attributed to Ahmed Alkhateeb.

At least 127 records · Page 7Linked to original sources

arXiv2020

Deep Learning Predictive Band Switching in Wireless Networks

In cellular systems, the user equipment (UE) can request a change in the frequency band when its rate drops below a threshold on the current band. The UE is then instructed by the base station (BS) to measure the quality of candidate bands, which requires a measurement gap in the data transmission, thus lowering the data rate. We propose an online-learning based band switching approach that does not require any measurement gap. Our proposed classifier-based band switching policy instead exploits spatial and spectral correlation between radio frequency signals in different bands based on knowledge of the UE location. We focus on switching between a lower (e.g., 3.5 GHz) band and a millimeter wave band (e.g., 28 GHz), and design and evaluate two classification models that are trained on a ray-tracing dataset. A key insight is that measurement gaps are overkill, in that only the relative order of the bands is necessary for band selection, rather than a full channel estimate. Our proposed machine learning based policies achieve roughly 30% improvement in mean effective rates over those of the industry standard policy, while achieving misclassification errors well below 0.5% and maintaining resilience against blockage uncertainty.

cs.NI↗

arXiv2020

Neural Networks Based Beam Codebooks: Learning mmWave Massive MIMO Beams that Adapt to Deployment and Hardware

Millimeter wave (mmWave) and massive MIMO systems are intrinsic components of 5G and beyond. These systems rely on using beamforming codebooks for both initial access and data transmission. Current beam codebooks, however, generally consist of a large number of narrow beams that scan all possible directions, even if these directions are never used. This leads to very large training overhead. Further, these codebooks do not normally account for the hardware impairments or the possible non-uniform array geometries, and their calibration is an expensive process. To overcome these limitations, this paper develops an efficient online machine learning framework that learns how to adapt the codebook beam patterns to the specific deployment, surrounding environment, user distribution, and hardware characteristics. This is done by designing a novel complex-valued neural network architecture in which the neuron weights directly model the beamforming weights of the analog phase shifters, accounting for the key hardware constraints such as the constant-modulus and quantized-angles. This model learns the codebook beams through online and self-supervised training avoiding the need for explicit channel state information. This respects the practical situations where the channel is either unavailable, imperfect, or hard to obtain, especially in the presence of hardware impairments. Simulation results highlight the capability of the proposed solution in learning environment and hardware aware beam codebooks, which can significantly reduce the training overhead, enhance the achievable data rates, and improve the robustness against possible hardware impairments.

eess.SP↗

arXiv2020

3D Scene Based Beam Selection for mmWave Communications

In this paper, we present a novel framework of 3D scene based beam selection for mmWave communications that relies only on the environmental data and deep learning techniques. Different from other out-of-band side-information aided communication strategies, the proposed one fully utilizes the environmental information, e.g., the shape, the position, and even the materials of the surrounding buildings/cars/trees that are obtained from 3D scene reconstruction. Specifically, we build the neural networks with the input as point cloud of the 3D scene and the output as the beam indices. Compared with the LIDAR aided technique, the reconstructed 3D scene here is achieved from multiple images taken offline from cameras and thus significantly lowers down the cost and makes itself applicable for small mobile terminals. Simulation results show that the proposed 3D scene based beam selection can outperform the LIDAR method in terms of accuracy.

eess.SP↗

arXiv2020

Vision-Aided Dynamic Blockage Prediction for 6G Wireless Communication Networks

Unlocking the full potential of millimeter-wave and sub-terahertz wireless communication networks hinges on realizing unprecedented low-latency and high-reliability requirements. The challenge in meeting those requirements lies partly in the sensitivity of signals in the millimeter-wave and sub-terahertz frequency ranges to blockages. One promising way to tackle that challenge is to help a wireless network develop a sense of its surrounding using machine learning. This paper attempts to do that by utilizing deep learning and computer vision. It proposes a novel solution that proactively predicts \textit{dynamic} link blockages. More specifically, it develops a deep neural network architecture that learns from observed sequences of RGB images and beamforming vectors how to predict possible future link blockages. The proposed architecture is evaluated on a publicly available dataset that represents a synthetic dynamic communication scenario with multiple moving users and blockages. It scores a link-blockage prediction accuracy in the neighborhood of 86\%, a performance that is unlikely to be matched without utilizing visual data.

cs.CV↗

arXiv2020

Relay Aided Intelligent Reconfigurable Surfaces: Achieving the Potential Without So Many Antennas

This paper proposes a novel relay-aided intelligent reconfigurable surface (IRS) architecture for future wireless communication systems. The proposed architecture, which consists of two side-by-side intelligent surfaces connected via a full-duplex relay, has the potential of achieving the promising gains of intelligent surfaces while requiring much smaller numbers of reflecting elements. Consequently, the proposed IRS architecture needs significantly less channel estimation and beam training overhead and provides higher robustness compared to classical IRS approaches. Further, thanks to dividing the IRS reflection process over two surfaces, the position and orientation of these surfaces can be optimized to extend the wireless communication coverage and enhance the system performance. In this paper, the achievable rates and required numbers of elements using the proposed relay-aided IRS architecture are first analytically characterized and then evaluated using numerical simulations. The results show that the proposed architecture can achieve the data rate targets with much smaller numbers of elements compared to typical IRS solutions, which highlights a promising path towards the practical deployment of these intelligent surfaces.

cs.IT↗

arXiv2020

Advanced Receiver Architectures for Millimeter Wave Communications with Low-Resolution ADCs

Employing low-resolution analog-to-digital converters (ADCs) for millimeter wave receivers with large antenna arrays provides opportunity to efficiently reduce power consumption of the receiver. Reducing ADC resolution, however, results in performance degradation due to non-negligible quantization error. In addition, the large number of radio frequency (RF) chains is still not desirable. Accordingly, conventional low-resolution ADC systems require more efficient designs to minimize the cost and complexity while maximizing performance. In this article, we discuss advanced low-resolution ADC receiver architectures that further improve the spectral and energy efficiency tradeoff. To reduce both the numbers of RF chains and ADC bits, hybrid analog-and-digital beamforming is jointly considered with low-resolution ADCs. We explore the challenges in designing such receivers and present key insights on how the advanced architectures overcome such challenges. As an alternative low-resolution ADC receiver, we also introduce receivers with learning-based detection. The receiver does not require explicit channel estimation, thereby is suitable for one-bit ADC systems. Finally, future challenges and research issues are discussed.

cs.IT↗

arXiv2020

Deep Learning for Massive MIMO with 1-Bit ADCs: When More Antennas Need Fewer Pilots

This paper considers uplink massive MIMO systems with 1-bit analog-to-digital converters (ADCs) and develops a deep-learning based channel estimation framework. In this framework, the prior channel estimation observations and deep neural network models are leveraged to learn the non-trivial mapping from quantized received measurements to channels. For that, we derive the sufficient length and structure of the pilot sequence to guarantee the existence of this mapping function. This leads to the interesting, and \textit{counter-intuitive}, observation that when more antennas are employed by the massive MIMO base station, our proposed deep learning approach achieves better channel estimation performance, for the same pilot sequence length. Equivalently, for the same channel estimation performance, this means that when more antennas are employed, fewer pilots are required. This observation is also analytically proved for some special channel models. Simulation results confirm our observations and show that more antennas lead to better channel estimation both in terms of the normalized mean squared error and the achievable signal-to-noise ratio per antenna.

cs.IT↗

arXiv2020

ViWi: A Deep Learning Dataset Framework for Vision-Aided Wireless Communications

The growing role that artificial intelligence and specifically machine learning is playing in shaping the future of wireless communications has opened up many new and intriguing research directions. This paper motivates the research in the novel direction of \textit{vision-aided wireless communications}, which aims at leveraging visual sensory information in tackling wireless communication problems. Like any new research direction driven by machine learning, obtaining a development dataset poses the first and most important challenge to vision-aided wireless communications. This paper addresses this issue by introducing the Vision-Wireless (ViWi) dataset framework. It is developed to be a parametric, systematic, and scalable data generation framework. It utilizes advanced 3D-modeling and ray-tracing softwares to generate high-fidelity synthetic wireless and vision data samples for the same scenes. The result is a framework that does not only offer a way to generate training and testing datasets but helps provide a common ground on which the quality of different machine learning-powered solutions could be assessed.

cs.LG↗

arXiv2020

Learning Beam Codebooks with Neural Networks: Towards Environment-Aware mmWave MIMO

Scaling the number of antennas up is a key characteristic of current and future wireless communication systems. The hardware cost and power consumption, however, motivate large-scale MIMO systems, especially at millimeter wave (mmWave) bands, to rely on analog-only or hybrid analog/digital transceiver architectures. With these architectures, mmWave base stations normally use pre-defined beamforming codebooks for both initial access and data transmissions. Current beam codebooks, however, generally adopt single-lobe narrow beams and scan the entire angular space. This leads to high beam training overhead and loss in the achievable beamforming gains. In this paper, we propose a new machine learning framework for learning beamforming codebooks in hardware-constrained large-scale MIMO systems. More specifically, we develop a neural network architecture that accounts for the hardware constraints and learns beam codebooks that adapt to the surrounding environment and the user locations. Simulation results highlight the capability of the proposed solution in learning multi-lobe beams and reducing the codebook size, which leads to noticeable gains compared to classical codebook design approaches.

cs.IT↗

arXiv2020

Deep Reinforcement Learning for Intelligent Reflecting Surfaces: Towards Standalone Operation

The promising coverage and spectral efficiency gains of intelligent reflecting surfaces (IRSs) are attracting increasing interest. In order to realize these surfaces in practice, however, several challenges need to be addressed. One of these main challenges is how to configure the reflecting coefficients on these passive surfaces without requiring massive channel estimation or beam training overhead. Earlier work suggested leveraging supervised learning tools to design the IRS reflection matrices. While this approach has the potential of reducing the beam training overhead, it requires collecting large datasets for training the neural network models. In this paper, we propose a novel deep reinforcement learning framework for predicting the IRS reflection matrices with minimal training overhead. Simulation results show that the proposed online learning framework can converge to the optimal rate that assumes perfect channel knowledge. This represents an important step towards realizing a standalone IRS operation, where the surface configures itself without any control from the infrastructure.

cs.IT↗

arXiv2020

ViWi Vision-Aided mmWave Beam Tracking: Dataset, Task, and Baseline Solutions

Vision-aided wireless communication is motivated by the recent advances in deep learning and computer vision as well as the increasing dependence on line-of-sight links in millimeter wave (mmWave) and terahertz systems. By leveraging vision, this new research direction enables an interesting set of new capabilities such as vision-aided mmWave beam and blockage prediction, proactive hand-off, and resource allocation among others. These capabilities have the potential of reliably supporting highly-mobile applications such as vehicular/drone communications and wireless virtual/augmented reality in mmWave and terahertz systems. Investigating these interesting applications, however, requires the development of special dataset and machine learning tasks. Based on the Vision-Wireless (ViWi) dataset generation framework [1], this paper develops an advanced and realistic scenario/dataset that features multiple base stations, mobile users, and rich dynamics. Enabled by this dataset, the paper defines the vision-wireless mmWave beam tracking task (ViWi-BT) and proposes a baseline solution that can provide an initial benchmark for the future ViWi-BT algorithms.

eess.SP↗

arXiv2019

Deep Reinforcement Learning for 5G Networks: Joint Beamforming, Power Control, and Interference Coordination

The fifth generation of wireless communications (5G) promises massive increases in traffic volume and data rates, as well as improved reliability in voice calls. Jointly optimizing beamforming, power control, and interference coordination in a 5G wireless network to enhance the communication performance to end users poses a significant challenge. In this paper, we formulate the joint design of beamforming, power control, and interference coordination as a non-convex optimization problem to maximize the signal to interference plus noise ratio (SINR) and solve this problem using deep reinforcement learning. By using the greedy nature of deep Q-learning to estimate future rewards of actions and using the reported coordinates of the users served by the network, we propose an algorithm for voice bearers and data bearers in sub-6 GHz and millimeter wave (mmWave) frequency bands, respectively. The algorithm improves the performance measured by SINR and sum-rate capacity. In realistic cellular environments, the simulation results show that our algorithm outperforms the link adaptation industry standards for sub-6 GHz voice bearers. For data bearers in the mmWave frequency band, our algorithm approaches the maximum sum-rate capacity, but with less than 4% of the required run time.

cs.NI↗

arXiv2019

Millimeter Wave Base Stations with Cameras: Vision Aided Beam and Blockage Prediction

This paper investigates a novel research direction that leverages vision to help overcome the critical wireless communication challenges. In particular, this paper considers millimeter wave (mmWave) communication systems, which are principal components of 5G and beyond. These systems face two important challenges: (i) the large training overhead associated with selecting the optimal beam and (ii) the reliability challenge due to the high sensitivity to link blockages. Interestingly, most of the devices that employ mmWave arrays will likely also use cameras, such as 5G phones, self-driving vehicles, and virtual/augmented reality headsets. Therefore, we investigate the potential gains of employing cameras at the mmWave base stations and leveraging their visual data to help overcome the beam selection and blockage prediction challenges. To do that, this paper exploits computer vision and deep learning tools to predict mmWave beams and blockages directly from the camera RGB images and the sub-6GHz channels. The experimental results reveal interesting insights into the effectiveness of such solutions. For example, the deep learning model is capable of achieving over 90\% beam prediction accuracy, which only requires snapping a shot of the scene and zero overhead.

cs.IT↗

arXiv2019

Deep Learning for mmWave Beam and Blockage Prediction Using Sub-6GHz Channels

Predicting the millimeter wave (mmWave) beams and blockages using sub-6GHz channels has the potential of enabling mobility and reliability in scalable mmWave systems. These gains attracted increasing interest in the last few years. Prior work, however, has focused on extracting spatial channel characteristics at the sub-6GHz band first and then use them to reduce the mmWave beam training overhead. This approach has a number of limitations: (i) It still requires a beam search at mmWave, (ii) its performance is sensitive to the error associated with extracting the sub-6GHz channel characteristics, and (iii) it does not normally account for the different dielectric properties at the different bands. In this paper, we first prove that under certain conditions, there exist mapping functions that can predict the optimal mmWave beam and correct blockage status directly from the sub-6GHz channel, which overcome the limitations in prior work. These mapping functions, however, are hard to characterize analytically which motivates exploiting deep neural network models to learn them. For that, we prove that a large enough neural network can use the sub-6GHz channel to directly predict the optimal mmWave beam and the correct blockage status with success probabilities that can be made arbitrarily close to one. Then, we develop an efficient deep learning model and empirically evaluate its beam/blockage prediction performance using the publicly available dataset DeepMIMO. The results show that the proposed solution can predict the mmWave blockages with more than 90$\%$ success probability. Further, these results confirm the capability of the proposed deep learning model in predicting the optimal mmWave beams and approaching the optimal data rates, that assume perfect channel knowledge, while requiring no beam training overhead...

cs.IT↗

arXiv2019

Deep Learning for TDD and FDD Massive MIMO: Mapping Channels in Space and Frequency

Can we map the channels at one set of antennas and one frequency band to the channels at another set of antennas---possibly at a different location and a different frequency band? If this channel-to-channel mapping is possible, we can expect dramatic gains for massive MIMO systems. For example, in FDD massive MIMO, the uplink channels can be mapped to the downlink channels or the downlink channels at one subset of antennas can be mapped to the downlink channels at all the other antennas. This can significantly reduce (or even eliminate) the downlink training/feedback overhead. In the context of cell-free/distributed massive MIMO systems, this channel mapping can be leveraged to reduce the fronthaul signaling overhead as only the channels at a subset of the distributed terminals need to be fed to the central unit which can map them to the channels at all the other terminals. This mapping can also find interesting applications in mmWave beam prediction, MIMO radar, and massive MIMO based positioning. In this paper, we introduce the new concept of channel mapping in space and frequency, where the channels at one set of antennas and one frequency band are mapped to the channels at another set of antennas and frequency band. First, we prove that this channel-to-channel mapping function exists under the condition that the mapping from the candidate user positions to the channels at the first set of antennas is bijective; a condition that can be achieved with high probability in several practical MIMO communication scenarios. Then, we note that the channel-to-channel mapping function, even if it exists, is typically unknown and very hard to characterize analytically as it heavily depends on the various elements of the surrounding environment. With this motivation, we propose to leverage the powerful learning capabilities of deep neural networks ....

cs.IT↗

arXiv2019

Deep Learning for Direct Hybrid Precoding in Millimeter Wave Massive MIMO Systems

This paper proposes a novel neural network architecture, that we call an auto-precoder, and a deep-learning based approach that jointly senses the millimeter wave (mmWave) channel and designs the hybrid precoding matrices with only a few training pilots. More specifically, the proposed machine learning model leverages the prior observations of the channel to achieve two objectives. First, it optimizes the compressive channel sensing vectors based on the surrounding environment in an unsupervised manner to focus the sensing power on the most promising spatial directions. This is enabled by a novel neural network architecture that accounts for the constraints on the RF chains and models the transmitter/receiver measurement matrices as two complex-valued convolutional layers. Second, the proposed model learns how to construct the RF beamforming vectors of the hybrid architectures directly from the projected channel vector (the received sensing vector). The auto-precoder neural network that incorporates both the channel sensing and beam prediction is trained end-to-end as a multi-task classification problem. Thanks to this design methodology that leverages the prior channel observations and the implicit awareness about the surrounding environment/user distributions, the proposed approach significantly reduces the training overhead compared to classical (non-machine learning) solutions. For example, for a system of 64 transmit and 64 receive antennas, with 3 RF chains at both sides, the proposed solution needs only 8 or 16 channel training pilots to directly predict the RF beamforming/combining vectors of the hybrid architectures and achieve near-optimal achievable rates. This highlights a promising solution for the channel estimation and hybrid precoding design problem in mmWave and massive MIMO systems.

cs.IT↗

arXiv2019

Enabling Large Intelligent Surfaces with Compressive Sensing and Deep Learning

Employing large intelligent surfaces (LISs) is a promising solution for improving the coverage and rate of future wireless systems. These surfaces comprise a massive number of nearly-passive elements that interact with the incident signals, for example by reflecting them, in a smart way that improves the wireless system performance. Prior work focused on the design of the LIS reflection matrices assuming full knowledge of the channels. Estimating these channels at the LIS, however, is a key challenging problem, and is associated with large training overhead given the massive number of LIS elements. This paper proposes efficient solutions for these problems by leveraging tools from compressive sensing and deep learning. First, a novel LIS architecture based on sparse channel sensors is proposed. In this architecture, all the LIS elements are passive except for a few elements that are active (connected to the baseband of the LIS controller). We then develop two solutions that design the LIS reflection matrices with negligible training overhead. In the first approach, we leverage compressive sensing tools to construct the channels at all the LIS elements from the channels seen only at the active elements. These full channels can then be used to design the LIS reflection matrices with no training overhead. In the second approach, we develop a deep learning based solution where the LIS learns how to optimally interact with the incident signal given the channels at the active elements, which represent the current state of the environment and transmitter/receiver locations. We show that the achievable rates of the proposed compressive sensing and deep learning solutions approach the upper bound, that assumes perfect channel knowledge, with negligible training overhead and with less than 1% of the elements being active.

cs.IT↗

arXiv2019

Deep Learning Coordinated Beamforming for Highly-Mobile Millimeter Wave Systems

Supporting high mobility in millimeter wave (mmWave) systems enables a wide range of important applications such as vehicular communications and wireless virtual/augmented reality. Realizing this in practice, though, requires overcoming several challenges. First, the use of narrow beams and the sensitivity of mmWave signals to blockage greatly impact the coverage and reliability of highly-mobile links. Second, highly-mobile users in dense mmWave deployments need to frequently hand-off between base stations (BSs), which is associated with critical control and latency overhead. Further, identifying the optimal beamforming vectors in large antenna array mmWave systems requires considerable training overhead, which significantly affects the efficiency of these mobile systems. In this paper, a novel integrated machine learning and coordinated beamforming solution is developed to overcome these challenges and enable highly-mobile mmWave applications. In the proposed solution, a number of distributed yet coordinating BSs simultaneously serve a mobile user. This user ideally needs to transmit only one uplink training pilot sequence that will be jointly received at the coordinating BSs using omni or quasi-omni beam patterns. These received signals draw a defining signature not only for the user location, but also for its interaction with the surrounding environment. The developed solution then leverages a deep learning model that learns how to use these signatures to predict the beamforming vectors at the BSs. This renders a comprehensive solution that supports highly-mobile mmWave applications with reliable coverage, low latency, and negligible training overhead. Simulation results show that the proposed deep-learning coordinated beamforming strategy approaches the achievable rate of the genie-aided solution that knows the optimal beamforming vectors with no training overhead.

cs.IT↗