arXiv subjects

Antonio Capone

Publications and source records attributed to Antonio Capone.

At least 37 records · Page 2Linked to original sources

arXiv2021

Multi-Messenger Astrophysics with THESEUS in the 2030s

Multi-messenger astrophysics is becoming a major avenue to explore the Universe, with the potential to span a vast range of redshifts. The growing synergies between different probes is opening new frontiers, which promise profound insights into several aspects of fundamental physics and cosmology. In this context, THESEUS will play a central role during the 2030s in detecting and localizing the electromagnetic counterparts of gravitational wave and neutrino sources that the unprecedented sensitivity of next generation detectors will discover at much higher rates than the present. Here, we review the most important target signals from multi-messenger sources that THESEUS will be able to detect and characterize, discussing detection rate expectations and scientific impact.

astro-ph.IM↗

arXiv2020

ONETS: Online Network Slice Broker From Theory to Practice

Network slicing allows mobile network operators to open their physical network infrastructure platform to the concurrent deployment of multiple logical self-contained networks, i.e., network slices. In this paper we propose and analyze ONETS: an Online NETwork Slicing solution that (i) builds on the budgeted lock-up multi-armed bandit mathematical model and properties, (ii) derives its analytical bounds in our proposed extension for network slicing, (iii) seamlessly integrates into the 3GPP architecture, (iv) proves its feasibility through a proof-of-concept implementation on commercial hardware considering three network slices and (v) allows for the design of a low-complexity online network slice brokering solution that maximizes multiplexing gains.

cs.NI↗

arXiv2020

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.

astro-ph.IM↗

arXiv2020

gSeaGen: the KM3NeT GENIE-based code for neutrino telescopes

The gSeaGen code is a GENIE-based application developed to efficiently generate high statistics samples of events, induced by neutrino interactions, detectable in a neutrino telescope. The gSeaGen code is able to generate events induced by all neutrino flavours, considering topological differences between track-type and shower-like events. Neutrino interactions are simulated taking into account the density and the composition of the media surrounding the detector. The main features of gSeaGen are presented together with some examples of its application within the KM3NeT project.

astro-ph.IM↗

arXiv2017

Adaptive Robust Traffic Engineering in Software Defined Networks

One of the key advantages of Software-Defined Networks (SDN) is the opportunity to integrate traffic engineering modules able to optimize network configuration according to traffic. Ideally, network should be dynamically reconfigured as traffic evolves, so as to achieve remarkable gains in the efficient use of resources with respect to traditional static approaches. Unfortunately, reconfigurations cannot be too frequent due to a number of reasons related to route stability, forwarding rules instantiation, individual flows dynamics, traffic monitoring overhead, etc. In this paper, we focus on the fundamental problem of deciding whether, when and how to reconfigure the network during traffic evolution. We propose a new approach to cluster relevant points in the multi-dimensional traffic space taking into account similarities in optimal routing and not only in traffic values. Moreover, to provide more flexibility to the online decisions on when applying a reconfiguration, we allow some overlap between clusters that can guarantee a good-quality routing regardless of the transition instant. We compare our algorithm with state-of-the-art approaches in realistic network scenarios. Results show that our method significantly reduces the number of reconfigurations with a negligible deviation of the network performance with respect to the continuous update of the network configuration.

cs.NI↗

arXiv2017

A Multi-traffic Inter-cell Interference Coordination Scheme in Dense Cellular Networks

This paper proposes a novel semi-distributed and practical ICIC scheme based on the Almost Blank SubFrame (ABSF) approach specified by 3GPP. We define two mathematical programming problems for the cases of guaranteed and best-effort traffic, and use game theory to study the properties of the derived ICIC distributed schemes, which are compared in detail against unaffordable centralized schemes. Based on the analysis of the proposed models, we define Distributed Multi-traffic Scheduling (DMS), a unified distributed framework for adaptive interference-aware scheduling of base stations in future cellular networks which accounts for both guaranteed and best-effort traffic. DMS follows a two-tier approach, consisting of local ABSF schedulers, which perform the resource distribution between guaranteed and best effort traffic, and a lightweight local supervisor, which coordinates ABSF local decisions. As a result of such a two-tier design, DMS requires very light signaling to drive the local schedulers to globally efficient operating points. As shown by means of numerical results, DMS allows to (i) maximize radio resources reuse, (ii) provide requested quality for guaranteed traffic, (iii) minimize the time dedicated to guaranteed traffic to leave room for best-effort traffic, and (iv) maximize resource utilization efficiency for best-effort traffic.

cs.NI↗

arXiv2017

Fast Cell Discovery in mm-wave 5G Networks with Context Information

The exploitation of mm-wave bands is one of the key-enabler for 5G mobile radio networks. However, the introduction of mm-wave technologies in cellular networks is not straightforward due to harsh propagation conditions that limit the mm-wave access availability. Mm-wave technologies require high-gain antenna systems to compensate for high path loss and limited power. As a consequence, directional transmissions must be used for cell discovery and synchronization processes: this can lead to a non-negligible access delay caused by the exploration of the cell area with multiple transmissions along different directions. The integration of mm-wave technologies and conventional wireless access networks with the objective of speeding up the cell search process requires new 5G network architectural solutions. Such architectures introduce a functional split between C-plane and U-plane, thereby guaranteeing the availability of a reliable signaling channel through conventional wireless technologies that provides the opportunity to collect useful context information from the network edge. In this article, we leverage the context information related to user positions to improve the directional cell discovery process. We investigate fundamental trade-offs of this process and the effects of the context information accuracy on the overall system performance. We also cope with obstacle obstructions in the cell area and propose an approach based on a geo-located context database where information gathered over time is stored to guide future searches. Analytic models and numerical results are provided to validate proposed strategies.

cs.NI↗

arXiv2017

Relaxing state-access constraints in stateful programmable data planes

Supporting the programming of stateful packet forwarding functions in hardware has recently attracted the interest of the research community. When designing such switching chips, the challenge is to guarantee the ability to program functions that can read and modify data plane's state, while keeping line rate performance and state consistency. Current state-of-the-art designs are based on a very conservative all-or-nothing model: programmability is limited only to those functions that are guaranteed to sustain line rate, with any traffic workload. In effect, this limits the maximum time to execute state update operations. In this paper, we explore possible options to relax these constraints by using simulations on real traffic traces. We then propose a model in which functions can be executed in a larger but bounded time, while preventing data hazards with memory locking. We present results showing that such flexibility can be supported with little or no throughput degradation.

cs.NI↗

arXiv2016

Context Information for Fast Cell Discovery in mm-wave 5G Networks

The exploitation of the mm-wave bands is one of the most promising solutions for 5G mobile radio networks. However, the use of mm-wave technologies in cellular networks is not straightforward due to mm-wave harsh propagation conditions that limit access availability. In order to overcome this obstacle, hybrid network architectures are being considered where mm-wave small cells can exploit an overlay coverage layer based on legacy technology. The additional mm-wave layer can also take advantage of a functional split between control and user plane, that allows to delegate most of the signaling functions to legacy base stations and to gather context information from users for resource optimization. However, mm-wave technology requires high gain antenna systems to compensate for high path loss and limited power, e.g., through the use of multiple antennas for high directivity. Directional transmissions must be also used for the cell discovery and synchronization process, and this can lead to a non-negligible delay due to the need to scan the cell area with multiple transmissions at different directions. In this paper, we propose to exploit the context information related to user position, provided by the separated control plane, to improve the cell discovery procedure and minimize delay. We investigate the fundamental trade-offs of the cell discovery process with directional antennas and the effects of the context information accuracy on its performance. Numerical results are provided to validate our observations.

cs.NI↗

arXiv2016

Open Packet Processor: a programmable architecture for wire speed platform-independent stateful in-network processing

This paper aims at contributing to the ongoing debate on how to bring programmability of stateful packet processing tasks inside the network switches, while retaining platform independency. Our proposed approach, named "Open Packet Processor" (OPP), shows the viability (via an hardware prototype relying on commodity HW technologies and operating in a strictly bounded number of clock cycles) of eXtended Finite State Machines (XFSM) as low-level data plane programming abstraction. With the help of examples, including a token bucket and a C4.5 traffic classifier based on a binary tree, we show the ability of OPP to support stateful operation and flow-level feature tracking. Platform independence is accomplished by decoupling the implementation of hardware primitives (registries, conditions, update instructions, forwarding actions, matching facilities) from their usage by an application formally described via an abstract XFSM. We finally discuss limitations and extensions.

cs.NI↗

arXiv2015

SPIDER: Fault Resilient SDN Pipeline with Recovery Delay Guarantees

When dealing with node or link failures in Software Defined Networking (SDN), the network capability to establish an alternative path depends on controller reachability and on the round trip times (RTTs) between controller and involved switches. Moreover, current SDN data plane abstractions for failure detection (e.g. OpenFlow "Fast-failover") do not allow programmers to tweak switches' detection mechanism, thus leaving SDN operators still relying on proprietary management interfaces (when available) to achieve guaranteed detection and recovery delays. We propose SPIDER, an OpenFlow-like pipeline design that provides i) a detection mechanism based on switches' periodic link probing and ii) fast reroute of traffic flows even in case of distant failures, regardless of controller availability. SPIDER can be implemented using stateful data plane abstractions such as OpenState or Open vSwitch, and it offers guaranteed short (i.e. ms) failure detection and recovery delays, with a configurable trade off between overhead and failover responsiveness. We present here the SPIDER pipeline design, behavioral model, and analysis on flow tables' memory impact. We also implemented and experimentally validated SPIDER using OpenState (an OpenFlow 1.3 extension for stateful packet processing), showing numerical results on its performance in terms of recovery latency and packet losses.

cs.NI↗

arXiv2015

Detour Planning for Fast and Reliable Failure Recovery in SDN with OpenState

A reliable and scalable mechanism to provide protection against a link or node failure has additional requirements in the context of SDN and OpenFlow. Not only it has to minimize the load on the controller, but it must be able to react even when the controller is unreachable. In this paper we present a protection scheme based on precomputed backup paths and inspired by MPLS crankback routing, that guarantees instantaneous recovery times and aims at zero packet-loss after failure detection, regardless of controller reachability, even when OpenFlow's "fast-failover" feature cannot be used. The proposed mechanism is based on OpenState, an OpenFlow extension that allows a programmer to specify how forwarding rules should autonomously adapt in a stateful fashion, reducing the need to rely on remote controllers. We present the scheme as well as two different formulations for the computation of backup paths.

cs.NI↗

arXiv2015

Traffic Management Applications for Stateful SDN Data Plane

The successful OpenFlow approach to Software Defined Networking (SDN) allows network programmability through a central controller able to orchestrate a set of dumb switches. However, the simple match/action abstraction of OpenFlow switches constrains the evolution of the forwarding rules to be fully managed by the controller. This can be particularly limiting for a number of applications that are affected by the delay of the slow control path, like traffic management applications. Some recent proposals are pushing toward an evolution of the OpenFlow abstraction to enable the evolution of forwarding policies directly in the data plane based on state machines and local events. In this paper, we present two traffic management applications that exploit a stateful data plane and their prototype implementation based on OpenState, an OpenFlow evolution that we recently proposed.

cs.NI↗

arXiv2015

Energy management in communication networks: a journey through modelling and optimization glasses

The widespread proliferation of Internet and wireless applications has produced a significant increase of ICT energy footprint. As a response, in the last five years, significant efforts have been undertaken to include energy-awareness into network management. Several green networking frameworks have been proposed by carefully managing the network routing and the power state of network devices. Even though approaches proposed differ based on network technologies and sleep modes of nodes and interfaces, they all aim at tailoring the active network resources to the varying traffic needs in order to minimize energy consumption. From a modeling point of view, this has several commonalities with classical network design and routing problems, even if with different objectives and in a dynamic context. With most researchers focused on addressing the complex and crucial technological aspects of green networking schemes, there has been so far little attention on understanding the modeling similarities and differences of proposed solutions. This paper fills the gap surveying the literature with optimization modeling glasses, following a tutorial approach that guides through the different components of the models with a unified symbolism. A detailed classification of the previous work based on the modeling issues included is also proposed.

cs.NI↗

arXiv2014

Millimeter-wave Evolution for 5G Cellular Networks

Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular network requires evolution to increase the system rate 1000 times higher than the current systems in 10 years. Motivated by this common problem, there are several studies to integrate mm-wave access into current cellular networks as multi-band heterogeneous networks to exploit the ultra-wideband aspect of the mm-wave band. The authors of this paper have proposed comprehensive architecture of cellular networks with mm-wave access, where mm-wave small cell basestations and a conventional macro basestation are connected to Centralized-RAN (C-RAN) to effectively operate the system by enabling power efficient seamless handover as well as centralized resource control including dynamic cell structuring to match the limited coverage of mm-wave access with high traffic user locations via user-plane/control-plane splitting. In this paper, to prove the effectiveness of the proposed 5G cellular networks with mm-wave access, system level simulation is conducted by introducing an expected future traffic model, a measurement based mm-wave propagation model, and a centralized cell association algorithm by exploiting the C-RAN architecture. The numerical results show the effectiveness of the proposed network to realize 1000 times higher system rate than the current network in 10 years which is not achieved by the small cells using commonly considered 3.5 GHz band. Furthermore, the paper also gives latest status of mm-wave devices and regulations to show the feasibility of using mm-wave in the 5G systems.

cs.NI↗

arXiv2014

Towards Wire-speed Platform-agnostic Control of OpenFlow Switches

The possibility to offload, via a platform-agnostic specification, the execution of (some/part of the) control functions down to the switch and operate them at wire speed based on packet level events, would yield significant benefits in terms of control latency and reaction times, meanwhile retaining the SDN-type ability to program and instantiate a desired network operation from a central controller. While programmability inside the switches, at wire speed and using platform-independent abstractions, of "any possible'" control function seems well beyond the OpenFlow capabilities, in this paper we argue that a non trivial sub-class of stateful control functions, namely those that can be abstracted in terms of Mealy (Finite State) Machines, is already compatible with off-the-shelf OpenFlow version 1.1+ Hardware with marginal architectural modifications. With minimal additional hardware circuitry, the above sub-class can be extended to include support for bidirectional/cross-flow state handling. We demonstrate the viability of our proposed approach via two proof-of-concept implementations (hardware and software), and we show how some stateful control functionalities frequently exploited in network protocols are readily deployed using our application programming interface.

cs.NI↗

arXiv2014

A Distributed Demand-Side Management Framework for the Smart Grid

This paper proposes a fully distributed Demand-Side Management system for Smart Grid infrastructures, especially tailored to reduce the peak demand of residential users. In particular, we use a dynamic pricing strategy, where energy tariffs are function of the overall power demand of customers. We consider two practical cases: (1) a fully distributed approach, where each appliance decides autonomously its own scheduling, and (2) a hybrid approach, where each user must schedule all his appliances. We analyze numerically these two approaches, showing that they are characterized practically by the same performance level in all the considered grid scenarios. We model the proposed system using a non-cooperative game theoretical approach, and demonstrate that our game is a generalized ordinal potential one under general conditions. Furthermore, we propose a simple yet effective best response strategy that is proved to converge in a few steps to a pure Nash Equilibrium, thus demonstrating the robustness of the power scheduling plan obtained without any central coordination of the operator or the customers. Numerical results, obtained using real load profiles and appliance models, show that the system-wide peak absorption achieved in a completely distributed fashion can be reduced up to 55%, thus decreasing the capital expenditure (CAPEX) necessary to meet the growing energy demand.

cs.GT↗

arXiv2014

Robust Energy Management for Green and Survivable IP Networks

Despite the growing necessity to make Internet greener, it is worth pointing out that energy-aware strategies to minimize network energy consumption must not undermine the normal network operation. In particular, two very important issues that may limit the application of green networking techniques concern, respectively, network survivability, i.e. the network capability to react to device failures, and robustness to traffic variations. We propose novel modelling techniques to minimize the daily energy consumption of IP networks, while explicitly guaranteeing, in addition to typical QoS requirements, both network survivability and robustness to traffic variations. The impact of such limitations on final network consumption is exhaustively investigated. Daily traffic variations are modelled by dividing a single day into multiple time intervals (multi-period problem), and network consumption is reduced by putting to sleep idle line cards and chassis. To preserve network resiliency we consider two different protection schemes, i.e. dedicated and shared protection, according to which a backup path is assigned to each demand and a certain amount of spare capacity has to be available on each link. Robustness to traffic variations is provided by means of a specific modelling framework that allows to tune the conservatism degree of the solutions and to take into account load variations of different magnitude. Furthermore, we impose some inter-period constraints necessary to guarantee network stability and preserve the device lifetime. Both exact and heuristic methods are proposed. Experimentations carried out with realistic networks operated with flow-based routing protocols (i.e. MPLS) show that significant savings, up to 30%, can be achieved also when both survivability and robustness are fully guaranteed.

cs.NI↗