arXiv subjects

Antonio Ortega

Publications and source records attributed to Antonio Ortega.

At least 37 records · Page 2Linked to original sources

arXiv2025

Image Coding for Machines via Feature-Preserving Rate-Distortion Optimization

Many images and videos are primarily processed by computer vision algorithms, involving only occasional human inspection. When this content requires compression before processing, e.g., in distributed applications, coding methods must optimize for both visual quality and downstream task performance. We first show theoretically that an approach to reduce the effect of compression for a given task loss is to perform rate-distortion optimization (RDO) using the distance between features, obtained from the original and the decoded images, as a distortion metric. However, optimizing directly such a rate-distortion objective is computationally impractical because it requires iteratively encoding and decoding the entire image-plus feature evaluation-for each possible coding configuration. We address this problem by simplifying the RDO formulation to make the distortion term computable using block-based encoders. We first apply Taylor's expansion to the feature extractor, recasting the feature distance as a quadratic metric involving the Jacobian matrix of the neural network. Then, we replace the linearized metric with a block-wise approximation, which we call input-dependent squared error (IDSE). To make the metric computable, we approximate IDSE using sketches of the Jacobian. The resulting loss can be evaluated block-wise in the transform domain and combined with the sum of squared errors (SSE) to address both visual quality and computer vision performance. Simulations with AVC and HEVC across multiple feature extractors and downstream networks show up to 17 % bit-rate savings for the same task accuracy compared to RDO based on SSE, with no decoder complexity overhead and a small (7.86 %) encoder complexity increase.

eess.IV↗

arXiv2025

Transfer Learning via Lexical Relatedness: A Sarcasm and Hate Speech Case Study

Detecting hate speech in non-direct forms, such as irony, sarcasm, and innuendos, remains a persistent challenge for social networks. Although sarcasm and hate speech are regarded as distinct expressions, our work explores whether integrating sarcasm as a pre-training step improves implicit hate speech detection and, by extension, explicit hate speech detection. Incorporating samples from ETHOS, Sarcasm on Reddit, and Implicit Hate Corpus, we devised two training strategies to compare the effectiveness of sarcasm pre-training on a CNN+LSTM and BERT+BiLSTM model. The first strategy is a single-step training approach, where a model trained only on sarcasm is then tested on hate speech. The second strategy uses sequential transfer learning to fine-tune models for sarcasm, implicit hate, and explicit hate. Our results show that sarcasm pre-training improved the BERT+BiLSTM's recall by 9.7%, AUC by 7.8%, and F1-score by 6% on ETHOS. On the Implicit Hate Corpus, precision increased by 7.8% when tested only on implicit samples. By incorporating sarcasm into the training process, we show that models can more effectively detect both implicit and explicit hate.

cs.CL↗

arXiv2025

Structure-Preserving Medical Image Generation from a Latent Graph Representation

Supervised learning techniques have proven their efficacy in many applications with abundant data. However, applying these methods to medical imaging is challenging due to the scarcity of data, given the high acquisition costs and intricate data characteristics of those images, thereby limiting the full potential of deep neural networks. To address the lack of data, augmentation techniques leverage geometry, color, and the synthesis ability of generative models (GMs). Despite previous efforts, gaps in the generation process limit the impact of data augmentation to improve understanding of medical images, e.g., the highly structured nature of some domains, such as X-ray images, is ignored. Current GMs rely solely on the network's capacity to blindly synthesize augmentations that preserve semantic relationships of chest X-ray images, such as anatomical restrictions, representative structures, or structural similarities consistent across datasets. In this paper, we introduce a novel GM that leverages the structural resemblance of medical images by learning a latent graph representation (LGR). We design an end-to-end model to learn (i) a LGR that captures the intrinsic structure of X-ray images and (ii) a graph convolutional network (GCN) that reconstructs the X-ray image from the LGR. We employ adversarial training to guide the generator and discriminator models in learning the distribution of the learned LGR. Using the learned GCN, our approach generates structure-preserving synthetic images by mapping generated LGRs to X-ray. Additionally, we evaluate the learned graph representation for other tasks, such as X-ray image classification and segmentation. Numerical experiments demonstrate the efficacy of our approach, increasing performance up to $3\%$ and $2\%$ for classification and segmentation, respectively.

eess.IV↗

arXiv2025

Robust Classification under Noisy Labels: A Geometry-Aware Reliability Framework for Foundation Models

Foundation models (FMs) pretrained on large datasets have become fundamental for various downstream machine learning tasks, in particular in scenarios where obtaining perfectly labeled data is prohibitively expensive. In this paper, we assume an FM has to be fine-tuned with noisy data and present a two-stage framework to ensure robust classification in the presence of label noise without model retraining. Recent work has shown that simple k-nearest neighbor (kNN) approaches using an embedding derived from an FM can achieve good performance even in the presence of severe label noise. Our work is motivated by the fact that these methods make use of local geometry. In this paper, following a similar two-stage procedure, reliability estimation followed by reliability-weighted inference, we show that improved performance can be achieved by introducing geometry information. For a given instance, our proposed inference uses a local neighborhood of training data, obtained using the non-negative kernel (NNK) neighborhood construction. We propose several methods for reliability estimation that can rely less on distance and local neighborhood as the label noise increases. Our evaluation on CIFAR-10 and DermaMNIST shows that our methods improve robustness across various noise conditions, surpassing standard K-NN approaches and recent adaptive-neighborhood baselines.

cs.LG↗

arXiv2025

Sparse Interpretable Deep Learning with LIES Networks for Symbolic Regression

Symbolic regression (SR) aims to discover closed-form mathematical expressions that accurately describe data, offering interpretability and analytical insight beyond standard black-box models. Existing SR methods often rely on population-based search or autoregressive modeling, which struggle with scalability and symbolic consistency. We introduce LIES (Logarithm, Identity, Exponential, Sine), a fixed neural network architecture with interpretable primitive activations that are optimized to model symbolic expressions. We develop a framework to extract compact formulae from LIES networks by training with an appropriate oversampling strategy and a tailored loss function to promote sparsity and to prevent gradient instability. After training, it applies additional pruning strategies to further simplify the learned expressions into compact formulae. Our experiments on SR benchmarks show that the LIES framework consistently produces sparse and accurate symbolic formulae outperforming all baselines. We also demonstrate the importance of each design component through ablation studies.

cs.LG↗

arXiv2025

Adaptive Voxelization for Transform coding of 3D Gaussian splatting data

We present a novel compression framework for 3D Gaussian splatting (3DGS) data that leverages transform coding tools originally developed for point clouds. Contrary to existing 3DGS compression methods, our approach can produce compressed 3DGS models at multiple bitrates in a computationally efficient way. Point cloud voxelization is a discretization technique that point cloud codecs use to improve coding efficiency while enabling the use of fast transform coding algorithms. We propose an adaptive voxelization algorithm tailored to 3DGS data, to avoid the inefficiencies introduced by uniform voxelization used in point cloud codecs. We ensure the positions of larger volume Gaussians are represented at high resolution, as these significantly impact rendering quality. Meanwhile, a low-resolution representation is used for dense regions with smaller Gaussians, which have a relatively lower impact on rendering quality. This adaptive voxelization approach significantly reduces the number of Gaussians and the bitrate required to encode the 3DGS data. After voxelization, many Gaussians are moved or eliminated. Thus, we propose to fine-tune/recolor the remaining 3DGS attributes with an initialization that can reduce the amount of retraining required. Experimental results on pre-trained datasets show that our proposed compression framework outperforms existing methods.

eess.IV↗

arXiv2025

Rate-Distortion Optimization with Non-Reference Metrics for UGC Compression

Service providers must encode a large volume of noisy videos to meet the demand for user-generated content (UGC) in online video-sharing platforms. However, low-quality UGC challenges conventional codecs based on rate-distortion optimization (RDO) with full-reference metrics (FRMs). While effective for pristine videos, FRMs drive codecs to preserve artifacts when the input is degraded, resulting in suboptimal compression. A more suitable approach used to assess UGC quality is based on non-reference metrics (NRMs). However, RDO with NRMs as a measure of distortion requires an iterative workflow of encoding, decoding, and metric evaluation, which is computationally impractical. This paper overcomes this limitation by linearizing the NRM around the uncompressed video. The resulting cost function enables block-wise bit allocation in the transform domain by estimating the alignment of the quantization error with the gradient of the NRM. To avoid large deviations from the input, we add sum of squared errors (SSE) regularization. We derive expressions for both the SSE regularization parameter and the Lagrangian, akin to the relationship used for SSE-RDO. Experiments with images and videos show bitrate savings of more than 30\% over SSE-RDO using the target NRM, with no decoder complexity overhead and minimal encoder complexity increase.

eess.IV↗

arXiv2025

Joint Optimization of Primary and Secondary Transforms Using Rate-Distortion Optimized Transform Design

Data-dependent transforms are increasingly being incorporated into next-generation video coding systems such as AVM, a codec under development by the Alliance for Open Media (AOM), and VVC. To circumvent the computational complexities associated with implementing non-separable data-dependent transforms, combinations of separable primary transforms and non-separable secondary transforms have been studied and integrated into video coding standards. These codecs often utilize rate-distortion optimized transforms (RDOT) to ensure that the new transforms complement existing transforms like the DCT and the ADST. In this work, we propose an optimization framework for jointly designing primary and secondary transforms from data through a rate-distortion optimized clustering. Primary transforms are assumed to follow a path-graph model, while secondary transforms are non-separable. We empirically evaluate our proposed approach using AVM residual data and demonstrate that 1) the joint clustering method achieves lower total RD cost in the RDOT design framework, and 2) jointly optimized separable path-graph transforms (SPGT) provide better coding efficiency compared to separable KLTs obtained from the same data.

eess.IV↗

arXiv2025

AutoML for Multi-Class Anomaly Compensation of Sensor Drift

Addressing sensor drift is essential in industrial measurement systems, where precise data output is necessary for maintaining accuracy and reliability in monitoring processes, as it progressively degrades the performance of machine learning models over time. Our findings indicate that the standard cross-validation method used in existing model training overestimates performance by inadequately accounting for drift. This is primarily because typical cross-validation techniques allow data instances to appear in both training and testing sets, thereby distorting the accuracy of the predictive evaluation. As a result, these models are unable to precisely predict future drift effects, compromising their ability to generalize and adapt to evolving data conditions. This paper presents two solutions: (1) a novel sensor drift compensation learning paradigm for validating models, and (2) automated machine learning (AutoML) techniques to enhance classification performance and compensate sensor drift. By employing strategies such as data balancing, meta-learning, automated ensemble learning, hyperparameter optimization, feature selection, and boosting, our AutoML-DC (Drift Compensation) model significantly improves classification performance against sensor drift. AutoML-DC further adapts effectively to varying drift severities.

cs.LG↗

arXiv2024

Towards joint graph learning and sampling set selection from data

We explore the problem of sampling graph signals in scenarios where the graph structure is not predefined and must be inferred from data. In this scenario, existing approaches rely on a two-step process, where a graph is learned first, followed by sampling. More generally, graph learning and graph signal sampling have been studied as two independent problems in the literature. This work provides a foundational step towards jointly optimizing the graph structure and sampling set. Our main contribution, Vertex Importance Sampling (VIS), is to show that the sampling set can be effectively determined from the vertex importance (node weights) obtained from graph learning. We further propose Vertex Importance Sampling with Repulsion (VISR), a greedy algorithm where spatially -separated "important" nodes are selected to ensure better reconstruction. Empirical results on simulated data show that sampling using VIS and VISR leads to competitive reconstruction performance and lower complexity than the conventional two-step approach of graph learning followed by graph sampling.

cs.LG↗

arXiv2024

Variable-size Symmetry-based Graph Fourier Transforms for image compression

Modern compression systems use linear transformations in their encoding and decoding processes, with transforms providing compact signal representations. While multiple data-dependent transforms for image/video coding can adapt to diverse statistical characteristics, assembling large datasets to learn each transform is challenging. Also, the resulting transforms typically lack fast implementation, leading to significant computational costs. Thus, despite many papers proposing new transform families, the most recent compression standards predominantly use traditional separable sinusoidal transforms. This paper proposes integrating a new family of Symmetry-based Graph Fourier Transforms (SBGFTs) of variable sizes into a coding framework, focusing on the extension from our previously introduced 8x8 SBGFTs to the general case of NxN grids. SBGFTs are non-separable transforms that achieve sparse signal representation while maintaining low computational complexity thanks to their symmetry properties. Their design is based on our proposed algorithm, which generates symmetric graphs on the grid by adding specific symmetrical connections between nodes and does not require any data-dependent adaptation. Furthermore, for video intra-frame coding, we exploit the correlations between optimal graphs and prediction modes to reduce the cardinality of the transform sets, thus proposing a low-complexity framework. Experiments show that SBGFTs outperform the primary transforms integrated in the explicit Multiple Transform Selection (MTS) used in the latest VVC intra-coding, providing a bit rate saving percentage of 6.23%, with only a marginal increase in average complexity. A MATLAB implementation of the proposed algorithm is available online at [1].

eess.IV↗

arXiv2024

Color-Guided Flying Pixel Correction in Depth Images

We present a novel method to correct flying pixels within data captured by Time-of-flight (ToF) sensors. Flying pixel (FP) artifacts occur when signals from foreground and background objects reach the same sensor pixel, leading to a confident yet incorrect depth estimation in space - floating between two objects. Commercial RGB-D cameras have a complementary setup consisting of ToF sensors to capture depth in addition to RGB cameras. We propose a novel method to correct FPs by leveraging the aligned RGB and depth image in such RGB-D cameras to estimate the true depth values of FPs. Our method defines a 3D neighborhood around each point, representing a "field of view" that mirrors the acquisition process of ToF cameras. We propose a two-step iterative correction algorithm in which the FPs are first identified. Then, we estimate the true depth value of FPs by solving a least-squares optimization problem. Experimental results show that our proposed algorithm estimates the depth value of FPs as accurately as other algorithms in the literature.

eess.IV↗

arXiv2024

Graph-based Scalable Sampling of 3D Point Cloud Attributes

3D Point clouds (PCs) are commonly used to represent 3D scenes. They can have millions of points, making subsequent downstream tasks such as compression and streaming computationally expensive. PC sampling (selecting a subset of points) can be used to reduce complexity. Existing PC sampling algorithms focus on preserving geometry features and often do not scale to handle large PCs. In this work, we develop scalable graph-based sampling algorithms for PC color attributes, assuming the full geometry is available. Our sampling algorithms are optimized for a signal reconstruction method that minimizes the graph Laplacian quadratic form. We first develop a global sampling algorithm that can be applied to PCs with millions of points by exploiting sparsity and sampling rate adaptive parameter selection. Further, we propose a block-based sampling strategy where each block is sampled independently. We show that sampling the corresponding sub-graphs with optimally chosen self-loop weights (node weights) will produce a sampling set that approximates the results of global sampling while reducing complexity by an order of magnitude. Our empirical results on two large PC datasets show that our algorithms outperform the existing fast PC subsampling techniques (uniform and geometry feature preserving random sampling) by 2dB. Our algorithm is up to 50 times faster than existing graph signal sampling algorithms while providing better reconstruction accuracy. Finally, we illustrate the efficacy of PC attribute sampling within a compression scenario, showing that pre-compression sampling of PC attributes can lower the bitrate by 11% while having minimal effect on reconstruction.

eess.IV↗

arXiv2024

Graph-Based Signal Sampling with Adaptive Subspace Reconstruction for Spatially-Irregular Sensor Data

Choosing an appropriate frequency definition and norm is critical in graph signal sampling and reconstruction. Most previous works define frequencies based on the spectral properties of the graph and use the same frequency definition and $\ell_2$-norm for optimization for all sampling sets. Our previous work demonstrated that using a sampling set-adaptive norm and frequency definition can address challenges in classical bandlimited approximation, particularly with model mismatches and irregularly distributed data. In this work, we propose a method for selecting sampling sets tailored to the sampling set adaptive GFT-based interpolation. When the graph models the inverse covariance of the data, we show that this adaptive GFT enables localizing the bandlimited model mismatch error to high frequencies, and the spectral folding property allows us to track this error in reconstruction. Based on this, we propose a sampling set selection algorithm to minimize the worst-case bandlimited model mismatch error. We consider partitioning the sensors in a sensor network sampling a continuous spatial process as an application. Our experiments show that sampling and reconstruction using sampling set adaptive GFT significantly outperform methods that used fixed GFTs and bandwidth-based criterion.

eess.SP↗

arXiv2024

Fast DCT+: A Family of Fast Transforms Based on Rank-One Updates of the Path Graph

This paper develops fast graph Fourier transform (GFT) algorithms with O(n log n) runtime complexity for rank-one updates of the path graph. We first show that several commonly-used audio and video coding transforms belong to this class of GFTs, which we denote by DCT+. Next, starting from an arbitrary generalized graph Laplacian and using rank-one perturbation theory, we provide a factorization for the GFT after perturbation. This factorization is our central result and reveals a progressive structure: we first apply the unperturbed Laplacian's GFT and then multiply the result by a Cauchy matrix. By specializing this decomposition to path graphs and exploiting the properties of Cauchy matrices, we show that Fast DCT+ algorithms exist. We also demonstrate that progressivity can speed up computations in applications involving multiple transforms related by rank-one perturbations (e.g., video coding) when combined with pruning strategies. Our results can be extended to other graphs and rank-k perturbations. Runtime analyses show that Fast DCT+ provides computational gains over the naive method for graph sizes larger than 64, with runtime approximately equal to that of 8 DCTs.

eess.SP↗

arXiv2024

Generalized Graph Signal Reconstruction via the Uncertainty Principle

We introduce a novel uncertainty principle for generalized graph signals that extends classical time-frequency and graph uncertainty principles into a unified framework. By defining joint vertex-time and spectral-frequency spreads, we quantify signal localization across these domains, revealing a trade-off between them. This framework allows us to identify a class of signals with maximal energy concentration in both domains, forming the fundamental atoms for a new joint vertex-time dictionary. This dictionary enhances signal reconstruction under practical constraints, such as incomplete or intermittent data, commonly encountered in sensor and social networks. Numerical experiments on real-world datasets demonstrate the effectiveness of the proposed approach, showing improved reconstruction accuracy and noise robustness compared to existing methods.

eess.SP↗

arXiv2024

Feature-Preserving Rate-Distortion Optimization in Image Coding for Machines

With the increasing number of images and videos consumed by computer vision algorithms, compression methods are evolving to consider both perceptual quality and performance in downstream tasks. Traditional codecs can tackle this problem by performing rate-distortion optimization (RDO) to minimize the distance at the output of a feature extractor. However, neural network non-linearities can make the rate-distortion landscape irregular, leading to reconstructions with poor visual quality even for high bit rates. Moreover, RDO decisions are made block-wise, while the feature extractor requires the whole image to exploit global information. In this paper, we address these limitations in three steps. First, we apply Taylor's expansion to the feature extractor, recasting the metric as an input-dependent squared error involving the Jacobian matrix of the neural network. Second, we make a localization assumption to compute the metric block-wise. Finally, we use randomized dimensionality reduction techniques to approximate the Jacobian. The resulting expression is monotonic with the rate and can be evaluated in the transform domain. Simulations with AVC show that our approach provides bit-rate savings while preserving accuracy in downstream tasks with less complexity than using the feature distance directly.

eess.IV↗

arXiv2024

Out-of-Distribution Detection through Soft Clustering with Non-Negative Kernel Regression

As language models become more general purpose, increased attention needs to be paid to detecting out-of-distribution (OOD) instances, i.e., those not belonging to any of the distributions seen during training. Existing methods for detecting OOD data are computationally complex and storage-intensive. We propose a novel soft clustering approach for OOD detection based on non-negative kernel regression. Our approach greatly reduces computational and space complexities (up to 11x improvement in inference time and 87% reduction in storage requirements) and outperforms existing approaches by up to 4 AUROC points on four different benchmarks. We also introduce an entropy-constrained version of our algorithm, which leads to further reductions in storage requirements (up to 97% lower than comparable approaches) while retaining competitive performance. Our soft clustering approach for OOD detection highlights its potential for detecting tail-end phenomena in extreme-scale data settings.

cs.LG↗