arXiv subjects

Jun Tang

Publications and source records attributed to Jun Tang.

At least 19 recordsLinked to original sources

arXiv2026

Distributed Inner-Product Estimation for Continuous-Variable Quantum States

Distributed inner product estimation (DIPE) is a fundamental task in quantum information, aiming to estimate the inner product between two unknown quantum states prepared on distributed quantum platforms. For multimode continuous-variable (CV) systems, the infinite-dimensional Hilbert space poses an additional challenge. In this work, we develop a CV-DIPE protocol using only local homodyne measurements at shared phase settings and classical communication. Under a known bound on the mean energy per mode, we derive explicit finite-sample guarantees and sufficient copy counts for estimating the full inner product to prescribed accuracy and confidence. The energy constraint yields an inverse-square truncation-bias bound, while Gaussian structure strengthens the tail control to exponential decay and improves the resulting accuracy scaling. Numerical simulations with Gaussian and non-Gaussian states illustrate the balance between truncation bias and statistical error and its dependence on mode number and energy. Our results enable independent CV platforms to benchmark their state preparations against one another, even when neither state admits a tractable classical description.

quant-ph↗

arXiv2026

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

eess.SP↗

arXiv2026

Contrastive On-Policy Distillation

On-policy distillation (OPD) trains a student model on trajectories sampled from its own policy, providing dense token-level supervision by minimizing the divergence between the teacher's and student's output distributions at each token. Although existing OPD approaches effectively distill strong reasoning capabilities into student models, they inherently inherit uncurated chain-of-thought traces, exacerbating overthinking and reasoning redundancy. To address this limitation, we introduce COPD, a contrastive OPD framework. Specifically, for each token generated by the student, a frozen teacher evaluates the current student state under two contrasting prompts that induce low and high reasoning effort, respectively. The resulting difference in log-probabilities serves as a token-level advantage signal to guide the policy update. Rather than merely mimicking a single teacher distribution, COPD guides the student model toward acquiring concise and efficient reasoning strategies. We evaluate COPD across 9 multimodal benchmarks covering both reasoning and understanding tasks. Empirical results show that COPD substantially reduces reasoning length without hurting task performance, consistently improving efficiency across different tasks and model scales. In addition, this contrastive paradigm extends naturally to on-policy self-distillation (OPSD), establishing self-contrastive supervisory signals that enable a single model to compress its own reasoning without an external teacher.

cs.CV↗

arXiv2026

Qwen-Drive-1.0: An Initial Step towards a Vision-Language Foundation Model for Autonomous Driving

We present Qwen-Drive-1.0, an initial step towards a vision-language foundation model for autonomous driving. Qwen-Drive-1.0 retains the architecture of the pretrained vision-language model (VLM) and integrates 3D perception, visual question answering, and motion planning within a unified framework. An external bird's-eye-view (BEV) perception head jointly performs 3D object detection, semantic occupancy prediction, and BEV map segmentation. It serves as a probe of the 3D information accessible from the shared representations and provides an explicit, inspectable interface to 3D scene structure. A Planning Expert conditions on shared VLM representations to generate future ego trajectories. A staged training recipe combines driving supervision with general-purpose vision-language data to acquire driving-specific competence while helping preserve broad visual understanding and instruction-following capabilities. Experiments demonstrate strong 3D perception and driving scene understanding while largely preserving general vision-language capability. Comprehensive evaluations across open-loop, pseudo-closed-loop, and closed-loop settings further show highly competitive motion-planning performance.

cs.CV↗

arXiv2026

CC-OCR V2: Fine-Grained Attribution of LMM Failures in Real-World Visual Document Understanding

Recent Large Multimodal Models (LMMs) have achieved remarkable progress on OCR-centric document understanding and processing tasks. Existing benchmarks primarily evaluate LMMs across diverse tasks to reflect practical document-processing workflows or analyze how document characteristics influence model performance. However, they provide limited insight into the reliability of LMMs under real-world document acquisition conditions, where factors such as lighting, screen displays, imaging quality, and capture methods can substantially affect performance. To bridge this gap, we present CC-OCR v2, a comprehensive benchmark for attributing LMM failures in real-world document processing. CC-OCR v2 provides a unified evaluation framework covering five core document-processing capabilities through 16 subtasks, 74 application scenarios, and 7,093 samples. The benchmark spans five evaluation tracks, ten document categories, and 32 languages in the recognition suite. Beyond task-level evaluation, each sample is annotated with ten fine-grained document factors, enabling systematic attribution of model failures across document types and acquisition conditions. Extensive experiments on 17 representative LMMs reveal substantial performance variation across tasks, document categories, and real-world conditions. Moreover, models with comparable overall accuracy often exhibit fundamentally different failure patterns under specific document factors, highlighting a significant gap between benchmark-level performance and reliable deployment in practical applications. The dataset and evaluation toolkit are publicly available at https://github.com/eioss/CC-OCR-V2.

cs.CL↗

arXiv2026

Rationale-Guided Knowledge Distillation for Cross-Lingual Stance Detection

Stance detection aims to identify whether a text expresses a favorable or opposing attitude toward a given target, and serves as an important task for various downstream applications. Although existing studies have achieved strong performance in monolingual settings, especially in English, many low-resource languages such as Catalan still lack sufficient annotated data for training effective models. Cross-lingual stance detection alleviates this problem by transferring stance knowledge from resource-rich languages to low-resource languages. However, most existing methods mainly rely on semantic alignment between texts and targets, while ignoring the reasoning process required for reliable stance inference. Although Large Language Models provide strong reasoning ability, their high computational cost and inference latency limit practical deployment. To address these limitations, we propose a rationale-guided knowledge distillation framework for cross-lingual stance detection. Specifically, we use Chain-of-Thought prompting to guide Large Language Models in generating informative rationales, and distill the resulting reasoning knowledge into a compact student model. We further design a dual-path distillation mechanism to align rationale-enhanced and rationale-free representations, together with their prediction distributions. In addition, two contrastive learning strategies are introduced to improve stance discrimination. Experiments on multilingual benchmarks demonstrate that our method consistently outperforms competitive baselines.

cs.CL↗

arXiv2026

Enhancing Large Multimodal Models in Key Information Extraction via Scene-Aware Document Synthesis

Key Information Extraction (KIE) converts visually rich documents into structured data, but practical deployment remains challenging: strong performance often relies on costly on-server Large Multimodal Models (LMMs), while compact locally deployable models lack sufficient KIE supervision. We present SAYRE, a scene-aware document synthesis framework for generating scalable KIE training data without hand-crafted template design. Given a few exemplar documents, SAYRE captures category-specific content patterns and layout conventions to synthesize document-schema-annotation triples. It further introduces error-driven generation, which expands real-world failure cases into hard training examples while preserving their structural patterns. Experiments on constrained- and open-category KIE show that SAYRE consistently improves Qwen3-VL backbones and achieves the strongest overall performance among on-device LMMs. Data scaling experiments show an overall upward trend as more synthesized data is introduced, especially for smaller models and open-category extraction. Error analysis further shows that synthesized training reduces field-level errors by improving schema-aware extraction over dense tables, business identifiers, and contract clauses. These results establish scene-aware synthesis as an effective data-centric approach for improving practical multimodal KIE.

cs.CV↗

arXiv2026

scKDGM: KAN-guided Dynamic Graph Masked Learning for Single-Cell RNA-seq Clustering

Single-cell RNA sequencing (scRNA-seq) clustering is essential for identifying cell types, but high dimensionality, sparsity, dropout, and technical noise hinder robust expression representation and cell graph construction. Existing masked autoencoders mainly use expression recovery for feature reconstruction, while graph clustering methods usually depend on fixed KNN graphs and do not feed recovered expression back into graph optimization. We propose scKDGM, a KAN-guided dynamic graph masked learning framework for scRNA-seq clustering. scKDGM uses graph-aware distribution preserving gene masking (GDP-Mask) to perturb cell identity, a KAN-based TAKGCN encoder to learn masked-view representations, mask-guided expression recovery to construct a dynamic graph, and cross-view contrastive learning to transfer recovery signals into topology updates. A ZINB loss models overdispersion and zero inflation. Experiments on 12 real scRNA-seq datasets show that scKDGM outperforms 10 baselines in average NMI and ARI.

cs.LG↗

arXiv2026

Complex VAE with Heavy-Tailed Likelihood for Radar Target Detection in Sea Clutter

To address the heavy-tailed, spike-prone nature of sea clutter and the scarcity of labeled target data, an unsupervised complex-valued variational autoencoder (VAE) for maritime radar target detection is proposed. In implementation, each complex baseband slow-time sequence is represented by its in-phase and quadrature components, and the model learns their joint reconstruction from clutter-only data. A Student-\(t\) negative log-likelihood is adopted to capture heavy-tailed reconstruction errors while reducing sensitivity to outliers during clutter learning. In addition, a time-domain amplitude error constraint is introduced to penalize slow-time magnitude mismatch in the reconstruction. At inference, reconstruction deviation is used as the detection statistic, and the decision threshold is set via an empirical quantile estimated from a clutter-only validation set to enforce a constant false-alarm rate (CFAR). Experiments on measured sea-clutter data show that detection performance is consistently improved over MF, AMF, and a real-valued \(β\)-VAE under CFAR constraints.

eess.SP↗

arXiv2026

Subspace Fusion Sensing for Cooperative ISAC

This paper proposes a subspace fusion sensing algorithm for cooperative integrated sensing and communication. First, we stack the received signals from access points (APs) into a third-order tensor and construct the equivalent virtual antenna (EVA) array via tensor unfolding. Then, a data association-free subspace-based fusion sensing algorithm is developed utilizing the EVA arrays from distributed APs. A derivation of Cramer-Rao lower bound (CRLB) is also presented. Finally, simulation results validate the effectiveness of the proposed algorithm compared to traditional techniques.

eess.SP↗

arXiv2026

OmniParser V2: Structured-Points-of-Thought for Unified Visual Text Parsing and Its Generality to Multimodal Large Language Models

Visually-situated text parsing (VsTP) has recently seen notable advancements, driven by the growing demand for automated document understanding and the emergence of large language models capable of processing document-based questions. While various methods have been proposed to tackle the complexities of VsTP, existing solutions often rely on task-specific architectures and objectives for individual tasks. This leads to modal isolation and complex workflows due to the diversified targets and heterogeneous schemas. In this paper, we introduce OmniParser V2, a universal model that unifies VsTP typical tasks, including text spotting, key information extraction, table recognition, and layout analysis, into a unified framework. Central to our approach is the proposed Structured-Points-of-Thought (SPOT) prompting schemas, which improves model performance across diverse scenarios by leveraging a unified encoder-decoder architecture, objective, and input\&output representation. SPOT eliminates the need for task-specific architectures and loss functions, significantly simplifying the processing pipeline. Our extensive evaluations across four tasks on eight different datasets show that OmniParser V2 achieves state-of-the-art or competitive results in VsTP. Additionally, we explore the integration of SPOT within a multimodal large language model structure, further enhancing visual text parsing capabilities on four tasks, thereby confirming the generality of SPOT prompting technique. The code is available at \href{https://github.com/AlibabaResearch/AdvancedLiterateMachinery}{AdvancedLiterateMachinery}.

cs.CV↗

arXiv2026

Multivariate Time Series Anomaly Detection via Dual-Branch Reconstruction and Autoregressive Flow-based Residual Density Estimation

Multivariate Time Series Anomaly Detection (MTSAD) is critical for real-world monitoring scenarios such as industrial control and aerospace systems. Mainstream reconstruction-based anomaly detection methods suffer from two key limitations: first, overfitting to spurious correlations induced by an overemphasis on cross-variable modeling; second, the generation of misleading anomaly scores by simply summing up multivariable reconstruction errors, which makes it difficult to distinguish between hard-to-reconstruct samples and genuine anomalies. To address these issues, we propose DBR-AF, a novel framework that integrates a dual-branch reconstruction (DBR) encoder and an autoregressive flow (AF) module. The DBR encoder decouples cross-variable correlation learning and intra-variable statistical property modeling to mitigate spurious correlations, while the AF module employs multiple stacked reversible transformations to model the complex multivariate residual distribution and further leverages density estimation to accurately identify normal samples with large reconstruction errors. Extensive experiments on seven benchmark datasets demonstrate that DBR-AF achieves state-of-the-art performance, with ablation studies validating the indispensability of its core components.

cs.LG↗

arXiv2025

Neural personal sound zones with flexible bright zone control

Personal sound zone (PSZ) reproduction system, which attempts to create distinct virtual acoustic scenes for different listeners at their respective positions within the same spatial area using one loudspeaker array, is a fundamental technology in the application of virtual reality. For practical applications, the reconstruction targets must be measured on the same fixed receiver array used to record the local room impulse responses (RIRs) from the loudspeaker array to the control points in each PSZ, which makes the system inconvenient and costly for real-world use. In this paper, a 3D convolutional neural network (CNN) designed for PSZ reproduction with flexible control microphone grid and alternative reproduction target is presented, utilizing the virtual target scene as inputs and the PSZ pre-filters as output. Experimental results of the proposed method are compared with the traditional method, demonstrating that the proposed method is able to handle varied reproduction targets on flexible control point grid using only one training session. Furthermore, the proposed method also demonstrates the capability to learn global spatial information from sparse sampling points distributed in PSZs.

cs.SD↗

arXiv2025

Qwen3-VL Technical Report

We introduce Qwen3-VL, the most capable vision-language model in the Qwen series to date, achieving superior performance across a broad range of multimodal benchmarks. It natively supports interleaved contexts of up to 256K tokens, seamlessly integrating text, images, and video. The model family includes both dense (2B/4B/8B/32B) and mixture-of-experts (30B-A3B/235B-A22B) variants to accommodate diverse latency-quality trade-offs. Qwen3-VL delivers three core pillars: (i) markedly stronger pure-text understanding, surpassing comparable text-only backbones in several cases; (ii) robust long-context comprehension with a native 256K-token window for both text and interleaved multimodal inputs, enabling faithful retention, retrieval, and cross-referencing across long documents and videos; and (iii) advanced multimodal reasoning across single-image, multi-image, and video tasks, demonstrating leading performance on comprehensive evaluations such as MMMU and visual-math benchmarks (e.g., MathVista and MathVision). Architecturally, we introduce three key upgrades: (i) an enhanced interleaved-MRoPE for stronger spatial-temporal modeling across images and video; (ii) DeepStack integration, which effectively leverages multi-level ViT features to tighten vision-language alignment; and (iii) text-based time alignment for video, evolving from T-RoPE to explicit textual timestamp alignment for more precise temporal grounding. Under comparable token budgets and latency constraints, Qwen3-VL achieves superior performance in both dense and Mixture-of-Experts (MoE) architectures. We envision Qwen3-VL serving as a foundational engine for image-grounded reasoning, agentic decision-making, and multimodal code intelligence in real-world workflows.

cs.CV↗

arXiv2025

A Two-Stage ISAC Framework for Low-Altitude Economy Based on 5G NR Signals

The evolution of next-generation wireless networks has spurred the vigorous development of the low-altitude economy (LAE). To support this emerging field while remaining compatible with existing network architectures, integrated sensing and communication (ISAC) based on 5G New Radio (NR) signals is regarded as a promising solution. However, merely leveraging standard 5G NR signals, such as the Synchronization Signal Block (SSB), presents fundamental limitations in sensing resolution. To address the issue, this paper proposes a two-stage coarse-to-fine sensing framework that utilizes standard 5G NR initial access signals augmented by a custom-designed sparse pilot structure (SPS) for high-precision unmanned aerial vehicles (UAV) sensing. In Stage I, we first fuse information from the SSB, Type\#0-PDCCH, and system information block 1 (SIB1) to ensure the initial target detection. In Stage II, a refined estimation algorithm is introduced to overcome the resolution limitations of these signals. Inspired by the sparse array theory, this stage employs a novel SPS, which is inserted into resource blocks (RBs) within the CORSET\#0 bandwidth. To accurately extract the off-grid range and velocity parameters from these sparse pilots, we develop a corresponding high-resolution algorithm based on the weighted unwrapped phase (WUP) technique and the RELAX-based iterative method. Finally, the density-based spatial clustering of applications with noise (DBSCAN) algorithm is adopted to prune the redundant detections arising from beam overlap. Comprehensive simulation results demonstrate the superior estimation accuracy and computational efficiency of the proposed framework in comparison to other techniques.

eess.SP↗

arXiv2025

COLA: Context-aware Language-driven Test-time Adaptation

Test-time adaptation (TTA) has gained increasing popularity due to its efficacy in addressing ``distribution shift'' issue while simultaneously protecting data privacy. However, most prior methods assume that a paired source domain model and target domain sharing the same label space coexist, heavily limiting their applicability. In this paper, we investigate a more general source model capable of adaptation to multiple target domains without needing shared labels. This is achieved by using a pre-trained vision-language model (VLM), \egno, CLIP, that can recognize images through matching with class descriptions. While the zero-shot performance of VLMs is impressive, they struggle to effectively capture the distinctive attributes of a target domain. To that end, we propose a novel method -- Context-aware Language-driven TTA (COLA). The proposed method incorporates a lightweight context-aware module that consists of three key components: a task-aware adapter, a context-aware unit, and a residual connection unit for exploring task-specific knowledge, domain-specific knowledge from the VLM and prior knowledge of the VLM, respectively. It is worth noting that the context-aware module can be seamlessly integrated into a frozen VLM, ensuring both minimal effort and parameter efficiency. Additionally, we introduce a Class-Balanced Pseudo-labeling (CBPL) strategy to mitigate the adverse effects caused by class imbalance. We demonstrate the effectiveness of our method not only in TTA scenarios but also in class generalisation tasks. The source code is available at https://github.com/NUDT-Bai-Group/COLA-TTA.

cs.CV↗

arXiv2025

A dataset of primary nasopharyngeal carcinoma MRI with multi-modalities segmentation

Multi-modality magnetic resonance imaging(MRI) data facilitate the early diagnosis, tumor segmentation, and disease staging in the management of nasopharyngeal carcinoma (NPC). The lack of publicly available, comprehensive datasets limits advancements in diagnosis, treatment planning, and the development of machine learning algorithms for NPC. Addressing this critical need, we introduce the first comprehensive NPC MRI dataset, encompassing MR axial imaging of 277 primary NPC patients. This dataset includes T1-weighted, T2-weighted, and contrast-enhanced T1-weighted sequences, totaling 831 scans. In addition to the corresponding clinical data, manually annotated and labeled segmentations by experienced radiologists offer high-quality data resources from untreated primary NPC.

eess.IV↗

arXiv2025

NTIRE 2025 XGC Quality Assessment Challenge: Methods and Results

This paper reports on the NTIRE 2025 XGC Quality Assessment Challenge, which will be held in conjunction with the New Trends in Image Restoration and Enhancement Workshop (NTIRE) at CVPR 2025. This challenge is to address a major challenge in the field of video and talking head processing. The challenge is divided into three tracks, including user generated video, AI generated video and talking head. The user-generated video track uses the FineVD-GC, which contains 6,284 user generated videos. The user-generated video track has a total of 125 registered participants. A total of 242 submissions are received in the development phase, and 136 submissions are received in the test phase. Finally, 5 participating teams submitted their models and fact sheets. The AI generated video track uses the Q-Eval-Video, which contains 34,029 AI-Generated Videos (AIGVs) generated by 11 popular Text-to-Video (T2V) models. A total of 133 participants have registered in this track. A total of 396 submissions are received in the development phase, and 226 submissions are received in the test phase. Finally, 6 participating teams submitted their models and fact sheets. The talking head track uses the THQA-NTIRE, which contains 12,247 2D and 3D talking heads. A total of 89 participants have registered in this track. A total of 225 submissions are received in the development phase, and 118 submissions are received in the test phase. Finally, 8 participating teams submitted their models and fact sheets. Each participating team in every track has proposed a method that outperforms the baseline, which has contributed to the development of fields in three tracks.

cs.CV↗