arXiv subjects

Kenneth Wright

Publications and source records attributed to Kenneth Wright.

12 recordsLinked to original sources

arXiv2026

Breakeven demonstration of quantum low-density parity-check codes

High-rate quantum low-density parity-check (qLDPC) codes are a leading candidate for fault-tolerant quantum computing. They feature higher encoding rates than planar alternatives such as the surface code, but their implementation often entails significant hardware hurdles like the need for long-range couplers. We leverage the flexibility of a trapped-ion quantum computer to demonstrate nine quantum error-correcting codes with starkly different qubit connectivity requirements on a single device without any hardware reconfiguration. These experiments span three families of quantum error-correcting codes: qLDPC codes, topological codes, and concatenated codes. With a qLDPC code encoding 4 logical qubits into 18 physical qubits, we achieve a logical error rate up to $9\times$ better than a previous demonstration of a similar code on superconducting solid-state qubits. Moreover, our implementation exhibits breakeven performance, with some instances achieving qubit lifetimes comparable to or slightly exceeding that of our trapped-ion qubits. We use a novel implementation of the optical-metastable-ground (OMG) architecture for addressable mid-circuit measurement and reset, which enables us to perform these experiments without any ion transport or dedicated coolant ions, requirements that typically consume a large fraction of the runtime or ion count of trapped-ion quantum computers.

quant-ph↗

arXiv2026

Measurement of the neutron shielding efficacy of magnetite for Proton Therapy Facilities and other applications

The neutron shielding properties of high-density concrete and magnetite aggregates were evaluated using both experimental measurements and Monte Carlo simulations. Because these materials are commonly used in medical accelerator facilities, it is essential to characterize their behavior under neutron radiation to ensure adequate shielding performance. Our experimental results show good agreement with the Monte Carlo calculations, confirming the reliability of the simulation approach. The attenuated neutron doses for various shielding thicknesses were determined for each aggregate type based on simulation and then compared as dose ratios. The findings indicate that magnetite provides superior neutron shielding, exhibiting a shorter attenuation length than conventional concrete for the same barrier thickness. The neutron attenuation characteristics of both concrete and magnetite were studied for typical neutron spectra encountered in clinical proton-therapy accelerators, including treatment rooms, primary, secondary barriers, and mazes. These results can support the optimization of radiation-shielding designs in medical and research facilities.

physics.med-ph↗

arXiv2023

Benchmarking a trapped-ion quantum computer with 30 qubits

Quantum computers are rapidly becoming more capable, with dramatic increases in both qubit count and quality. Among different hardware approaches, trapped-ion quantum processors are a leading technology for quantum computing, with established high-fidelity operations and architectures with promising scaling. Here, we demonstrate and thoroughly benchmark the IonQ Forte system: configured as a single-chain 30-qubit trapped-ion quantum computer with all-to-all operations. We assess the performance of our quantum computer operation at the component level via direct randomized benchmarking (DRB) across all 30 choose 2 = 435 gate pairs. We then show the results of application-oriented benchmarks and show that the system passes the suite of algorithmic qubit (AQ) benchmarks up to #AQ 29. Finally, we use our component-level benchmarking to build a system-level model to predict the application benchmarking data through direct simulation. While we find that the system-level model correlates with the experiment in predicting application circuit performance, we note quantitative discrepancies indicating significant out-of-model errors, leading to higher predicted performance than what is observed. This highlights that as quantum computers move toward larger and higher-quality devices, characterization becomes more challenging, suggesting future work required to push performance further.

quant-ph↗

arXiv2022

Orbital-optimized pair-correlated electron simulations on trapped-ion quantum computers

Variational quantum eigensolvers (VQE) are among the most promising approaches for solving electronic structure problems on near-term quantum computers. A critical challenge for VQE in practice is that one needs to strike a balance between the expressivity of the VQE ansatz versus the number of quantum gates required to implement the ansatz, given the reality of noisy quantum operations on near-term quantum computers. In this work, we consider an orbital-optimized pair-correlated approximation to the unitary coupled cluster with singles and doubles (uCCSD) ansatz and report a highly efficient quantum circuit implementation for trapped-ion architectures. We show that orbital optimization can recover significant additional electron correlation energy without sacrificing efficiency through measurements of low-order reduced density matrices (RDMs). In the dissociation of small molecules, the method gives qualitatively accurate predictions in the strongly-correlated regime when running on noise-free quantum simulators. On IonQ's Harmony and Aria trapped-ion quantum computers, we run end-to-end VQE algorithms with up to 12 qubits and 72 variational parameters - the largest full VQE simulation with a correlated wave function on quantum hardware. We find that even without error mitigation techniques, the predicted relative energies across different molecular geometries are in excellent agreement with noise-free simulators.

quant-ph↗

arXiv2020

Generalized Hamiltonian to describe imperfections in ion-light interaction

We derive a general Hamiltonian that governs the interaction between an $N$-ion chain and an externally controlled laser field, where the ion motion is quantized and the laser field is considered beyond the plane-wave approximation. This general form not only explicitly includes terms that are used to drive ion-ion entanglement, but also a series of unwanted terms that can lead to quantum gate infidelity. We demonstrate the power of our expressivity of the general Hamiltonian by singling out the effect of axial mode heating and confirm this experimentally. We discuss pathways forward in furthering the trapped-ion quantum computational quality, guiding hardware design decisions.

quant-ph↗

arXiv2019

Power-optimal, stabilized entangling gate between trapped-ion qubits

To achieve scalable quantum computing, improving entangling-gate fidelity and its implementation-efficiency are of utmost importance. We present here a linear method to construct provably power-optimal entangling gates on an arbitrary pair of qubits on a trapped-ion quantum computer. This method leverages simultaneous modulation of amplitude, frequency, and phase of the beams that illuminate the ions and, unlike the state of the art, does not require any search in the parameter space. The linear method is extensible, enabling stabilization against external parameter fluctuations to an arbitrary order at a cost linear in the order. We implement and demonstrate the power-optimal, stabilized gate on a trapped-ion quantum computer.

quant-ph↗

arXiv2019

Efficient Arbitrary Simultaneously Entangling Gates on a trapped-ion quantum computer

Efficiently entangling pairs of qubits is essential to fully harness the power of quantum computing. Here, we devise an exact protocol that simultaneously entangles arbitrary pairs of qubits on a trapped-ion quantum computer. The protocol requires classical computational resources polynomial in the system size, and very little overhead in the quantum control compared to a single-pair case. We demonstrate an exponential improvement in both classical and quantum resources over the current state of the art. We implement the protocol on a software-defined trapped-ion quantum computer, where we reconfigure the quantum computer architecture on demand. Together with the all-to-all connectivity available in trapped-ion quantum computers, our results establish that trapped ions are a prime candidate for a scalable quantum computing platform with minimal quantum latency.

quant-ph↗

arXiv2019

Ground-state energy estimation of the water molecule on a trapped ion quantum computer

Quantum computing leverages the quantum resources of superposition and entanglement to efficiently solve computational problems considered intractable for classical computers. Examples include calculating molecular and nuclear structure, simulating strongly-interacting electron systems, and modeling aspects of material function. While substantial theoretical advances have been made in mapping these problems to quantum algorithms, there remains a large gap between the resource requirements for solving such problems and the capabilities of currently available quantum hardware. Bridging this gap will require a co-design approach, where the expression of algorithms is developed in conjunction with the hardware itself to optimize execution. Here, we describe a scalable co-design framework for solving chemistry problems on a trapped ion quantum computer, and apply it to compute the ground-state energy of the water molecule. The robust operation of the trapped ion quantum computer yields energy estimates with errors approaching the chemical accuracy, which is the target threshold necessary for predicting the rates of chemical reaction dynamics.

quant-ph↗

arXiv2013

Modular cryostat for ion trapping with surface-electrode ion traps

We present a simple cryostat purpose built for use with surface-electrode ion traps, designed around an affordable, large cooling power commercial pulse tube refrigerator. A modular vacuum enclosure with a single vacuum space facilitates interior access, and enables rapid turnaround and flexiblity for future modifications. Long rectangular windows provide nearly 360 degrees of optical access in the plane of the ion trap, while a circular bottom window near the trap enables NA 0.4 light collection without the need for in-vacuum optics. We evaluate the system's mechanical and thermal characteristics, and we quantify ion trapping performance by trapping 40Ca+, finding small stray electric fields, long ion lifetimes, and low ion heating rates.

physics.atom-ph↗

arXiv2012

Reliable transport through a microfabricated X-junction surface-electrode ion trap

We report the design, fabrication, and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a ninety-degree cross. The trap is fabricated with very-large-scalable-integration (VLSI) techniques which are compatible with scaling to a larger quantum information processor. The shape of the radio-frequency (RF) electrodes is optimized with a genetic algorithm to minimize axial pseudopotential barriers and to minimize ion heating during transport. Seventy-eight independent DC control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs, trapping of ion chains with nearly-equal spacing in one of the trap's linear sections, and merging and splitting ions from these chains. Doppler-cooled ions survive more than 10^5 round-trip transits between junction legs without loss and more than sixty-five consecutive round trips without laser cooling.

quant-ph↗

arXiv2012

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled DC electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on DC electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.

physics.atom-ph↗

arXiv2011

Demonstration of integrated microscale optics in surface-electrode ion traps

In ion trap quantum information processing, efficient fluorescence collection is critical for fast, high-fidelity qubit detection and ion-photon entanglement. The expected size of future many-ion processors require scalable light collection systems. We report on the development and testing of a microfabricated surface-electrode ion trap with an integrated high numerical aperture (NA) micromirror for fluorescence collection. When coupled to a low NA lens, the optical system is inherently scalable to large arrays of mirrors in a single device. We demonstrate stable trapping and transport of 40Ca+ ions over a 0.63 NA micromirror and observe a factor of 1.9 enhancement in photon collection compared to the planar region of the trap.

quant-ph↗