arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 127 records · Page 7Linked to original sources

arXiv2025

A Tutorial on Six-Dimensional Movable Antenna for 6G Networks: Synergizing Positionable and Rotatable Antennas

Six-dimensional movable antenna (6DMA) is a new and revolutionary technique that fully exploits the wireless channel spatial variations at the transmitter/receiver by flexibly adjusting the three-dimensional (3D) positions and/or 3D rotations of antennas/antenna surfaces (sub-arrays), thereby improving the performance of wireless networks cost-effectively without the need to deploy additional antennas. It is thus expected that the integration of new 6DMAs into future sixth-generation (6G) wireless networks will fundamentally enhance antenna agility and adaptability, and introduce new degrees of freedom (DoFs) for system design. Despite its great potential, 6DMA faces new challenges to be efficiently implemented in wireless networks, including corresponding architectures, antenna position and rotation optimization, channel estimation, and system design from both communication and sensing perspectives. In this paper, we provide a tutorial on 6DMA-enhanced wireless networks to address the above issues by unveiling associated new channel models, hardware implementations and practical position/rotation constraints, as well as various appealing applications in wireless networks. Moreover, we discuss two special cases of 6DMA, namely, rotatable 6DMA with fixed antenna position and positionable 6DMA with fixed antenna rotation, and highlight their respective design challenges and applications. We further present prototypes developed for 6DMA-enhanced communication along with experimental results obtained with these prototypes. Finally, we outline promising directions for further investigation.

cs.IT↗

arXiv2025

IRS Aided Federated Learning: Multiple Access and Fundamental Tradeoff

This paper investigates an intelligent reflecting surface (IRS) aided wireless federated learning (FL) system, where an access point (AP) coordinates multiple edge devices to train a machine leaning model without sharing their own raw data. During the training process, we exploit the joint channel reconfiguration via IRS and resource allocation design to reduce the latency of a FL task. Particularly, we propose three transmission protocols for assisting the local model uploading from multiple devices to an AP, namely IRS aided time division multiple access (I-TDMA), IRS aided frequency division multiple access (I-FDMA), and IRS aided non-orthogonal multiple access (INOMA), to investigate the impact of IRS on the multiple access for FL. Under the three protocols, we minimize the per-round latency subject to a given training loss by jointly optimizing the device scheduling, IRS phase-shifts, and communicationcomputation resource allocation. For the associated problem under I-TDMA, an efficient algorithm is proposed to solve it optimally by exploiting its intrinsic structure, whereas the highquality solutions of the problems under I-FDMA and I-NOMA are obtained by invoking a successive convex approximation (SCA) based approach. Then, we further develop a theoretical framework for the performance comparison of the proposed three transmission protocols. Sufficient conditions for ensuring that I-TDMA outperforms I-NOMA and those of its opposite are unveiled, which is fundamentally different from that NOMA always outperforms TDMA in the system without IRS. Simulation results validate our theoretical findings and also demonstrate the usefulness of IRS for enhancing the fundamental tradeoff between the learning latency and learning accuracy.

eess.SP↗

arXiv2025

Intelligent Reflecting Surfaces for Wireless Networks: Deployment Architectures, Key Solutions, and Field Trials

Intelligent reflecting surfaces (IRSs) have emerged as a transformative technology for wireless networks by improving coverage, capacity, and energy efficiency through intelligent manipulation of wireless propagation environments. This paper provides a comprehensive study on the deployment and coordination of IRSs for wireless networks. By addressing both single- and multi-reflection IRS architectures, we examine their deployment strategies across diverse scenarios, including point-to-point, point-to-multipoint, and point-to-area setups. For the single-reflection case, we highlight the trade-offs between passive and active IRS architectures in terms of beamforming gain, coverage extension, and spatial multiplexing. For the multi-reflection case, we discuss practical strategies to optimize IRS deployment and element allocation, balancing cooperative beamforming gains and path loss. The paper further discusses practical challenges in IRS implementation, including environmental conditions, system compatibility, and hardware limitations. Numerical results and field tests validate the effectiveness of IRS-aided wireless networks and demonstrate their capacity and coverage improvements. Lastly, promising research directions, including movable IRSs, near-field deployments, and network-level optimization, are outlined to guide future investigations.

eess.SP↗

arXiv2025

Aerial Secure Collaborative Communications under Eavesdropper Collusion in Low-altitude Economy: A Generative Swarm Intelligent Approach

In this work, we aim to introduce distributed collaborative beamforming (DCB) into AAV swarms and handle the eavesdropper collusion by controlling the corresponding signal distributions. Specifically, we consider a two-way DCB-enabled aerial communication between two AAV swarms and construct these swarms as two AAV virtual antenna arrays. Then, we minimize the two-way known secrecy capacity and maximum sidelobe level to avoid information leakage from the known and unknown eavesdroppers, respectively. Simultaneously, we also minimize the energy consumption of AAVs when constructing virtual antenna arrays. Due to the conflicting relationships between secure performance and energy efficiency, we consider these objectives by formulating a multi-objective optimization problem, which is NP-hard and with a large number of decision variables. Accordingly, we design a novel generative swarm intelligence (GenSI) framework to solve the problem with less overhead, which contains a conditional variational autoencoder (CVAE)-based generative method and a proposed powerful swarm intelligence algorithm. In this framework, CVAE can collect expert solutions obtained by the swarm intelligence algorithm in other environment states to explore characteristics and patterns, thereby directly generating high-quality initial solutions in new environment factors for the swarm intelligence algorithm to search solution space efficiently. Simulation results show that the proposed swarm intelligence algorithm outperforms other state-of-the-art baseline algorithms, and the GenSI can achieve similar optimization results by using far fewer iterations than the ordinary swarm intelligence algorithm. Experimental tests demonstrate that introducing the CVAE mechanism achieves a 58.7% reduction in execution time, which enables the deployment of GenSI even on AAV platforms with limited computing power.

cs.NE↗

arXiv2025

A Tutorial on Movable Antennas for Wireless Networks

Movable antenna (MA) has been recognized as a promising technology to enhance the performance of wireless communication and sensing by enabling antenna movement. Such a significant paradigm shift from conventional fixed antennas (FAs) to MAs offers tremendous new opportunities towards realizing more versatile, adaptive and efficient next-generation wireless networks such as 6G. In this paper, we provide a comprehensive tutorial on the fundamentals and advancements in the area of MA-empowered wireless networks. First, we overview the historical development and contemporary applications of MA technologies. Next, to characterize the continuous variation in wireless channels with respect to antenna position and/or orientation, we present new field-response channel models tailored for MAs, which are applicable to narrowband and wideband systems as well as far-field and near-field propagation conditions. Subsequently, we review the state-of-the-art architectures for implementing MAs and discuss their practical constraints. A general optimization framework is then formulated to fully exploit the spatial degrees of freedom (DoFs) in antenna movement for performance enhancement in wireless systems. In particular, we delve into two major design issues for MA systems. First, we address the intricate antenna movement optimization problem for various communication and/or sensing systems to maximize the performance gains achievable by MAs. Second, we deal with the challenging channel acquisition issue in MA systems for reconstructing the channel mapping between arbitrary antenna positions inside the transmitter and receiver regions. Moreover, we show existing prototypes developed for MA-aided communication/sensing and the experimental results based on them. Finally, the extension of MA design to other wireless systems and its synergy with other emerging wireless technologies are discussed.

cs.IT↗

arXiv2025

Joint Size and Placement Optimization for IRS-Aided Communications with Active and Passive Elements

Different types of intelligent reflecting surfaces (IRS) are exploited for assisting wireless communications. The joint use of passive IRS (PIRS) and active IRS (AIRS) emerges as a promising solution owing to their complementary advantages. They can be integrated into a single hybrid active-passive IRS (HIRS) or deployed in a distributed manner, which poses challenges in determining the IRS element allocation and placement for rate maximization. In this paper, we investigate the capacity of an IRS-aided wireless communication system with both active and passive elements. Specifically, we consider three deployment schemes: 1) base station (BS)-HIRS-user (BHU); 2) BS-AIRS-PIRS-user (BAPU); 3) BS-PIRS-AIRS-user (BPAU). Under the line-of-sight channel model, we formulate a rate maximization problem via a joint optimization of the IRS element allocation and placement. We first derive the optimized number of active and passive elements for BHU, BAPU, and BPAU schemes, respectively. Then, low-complexity HIRS/AIRS placement strategies are provided. To obtain more insights, we characterize the system capacity scaling orders for the three schemes with respect to the large total number of IRS elements, amplification power budget, and BS transmit power. Finally, simulation results are presented to validate our theoretical findings and show the performance difference among the BHU, BAPU, and BPAU schemes with the proposed joint design under various system setups.

eess.SP↗

arXiv2025

Overview of AI and Communication for 6G Network: Fundamentals, Challenges, and Future Research Opportunities

With the growing demand for seamless connectivity and intelligent communication, the integration of artificial intelligence (AI) and sixth-generation (6G) communication networks has emerged as a transformative paradigm. By embedding AI capabilities across various network layers, this integration enables optimized resource allocation, improved efficiency, and enhanced system robust performance, particularly in intricate and dynamic environments. This paper presents a comprehensive overview of AI and communication for 6G networks, with a focus on emphasizing their foundational principles, inherent challenges, and future research opportunities. We first review the integration of AI and communications in the context of 6G, exploring the driving factors behind incorporating AI into wireless communications, as well as the vision for the convergence of AI and 6G. The discourse then transitions to a detailed exposition of the envisioned integration of AI within 6G networks, delineated across three progressive developmental stages. The first stage, AI for Network, focuses on employing AI to augment network performance, optimize efficiency, and enhance user service experiences. The second stage, Network for AI, highlights the role of the network in facilitating and buttressing AI operations and presents key enabling technologies, such as digital twins for AI and semantic communication. In the final stage, AI as a Service, it is anticipated that future 6G networks will innately provide AI functions as services, supporting application scenarios like immersive communication and intelligent industrial robots. In addition, we conduct an in-depth analysis of the critical challenges faced by the integration of AI and communications in 6G. Finally, we outline promising future research opportunities that are expected to drive the development and refinement of AI and 6G communications.

cs.NI↗

arXiv2025

Elements Allocation for Joint Active and Passive IRS Aided Wireless Communications: A Rate-Maximization Perspective

Unlike previous works that focused solely on passive intelligent reflecting surface (PIRS) or active IRS (AIRS), a novel joint AIRS and PIRS architecture has been developed to flexibly utilize their combined advantages in mitigating multiplicative path loss cost-effectively. In this paper, we consider the AIRS-PIRS jointly aided wireless point-to-point communication system with two different deployment schemes in three-dimensional (3D) space. To balance the trade-off between the square-order beamforming gain of PIRS and the unique power amplification gain of AIRS, we optimize the elements allocation and beamforming design of the two IRSs under various practical constraints from a rate-maximization perspective. Moreover, we derive a series of element-related closed-form analytical expressions and compare the performance of the two schemes. Our analysis shows that in both schemes, PIRS should be allocated more elements than AIRS, and the received signal-to-noise ratio (SNR) increases asymptotically with the cube of the number of reflecting elements, when the distance between AIRS and PIRS is sufficiently large. Last, simulation results validate our analysis and indicate that both schemes can achieve superior rate performance over various benchmarks.

cs.IT↗

arXiv2025

Enhancing Robustness and Security in ISAC Network Design: Leveraging Transmissive Reconfigurable Intelligent Surface with RSMA

In this paper, we propose a novel transmissive reconfigurable intelligent surface transceiver-enhanced robust and secure integrated sensing and communication network. A time-division sensing communication mechanism is designed for the scenario, which enables communication and sensing to share wireless resources. To address the interference management problem and hinder eavesdropping, we implement rate-splitting multiple access (RSMA), where the common stream is designed as a useful signal and an artificial noise, while taking into account the imperfect channel state information and modeling the channel for the illegal users in a fine-grained manner as well as giving an upper bound on the error. We introduce the secrecy outage probability and construct an optimization problem with secrecy sum-rate as the objective functions to optimize the common stream beamforming matrix, the private stream beamforming matrix and the timeslot duration variable. Due to the coupling of the optimization variables and the infinity of the error set, the proposed problem is a nonconvex optimization problem that cannot be solved directly. In order to address the above challenges, the block coordinate descent-based second-order cone programming algorithm is used to decouple the optimization variables and solving the problem. Specifically, the problem is decoupled into two subproblems concerning the common stream beamforming matrix, the private stream beamforming matrix, and the timeslot duration variable, which are solved by alternating optimization until convergence is reached. To solve the problem, S-procedure, Bernstein's inequality and successive convex approximation are employed to deal with the objective function and non-convex constraints. Numerical simulation results verify the superiority of the proposed scheme in improving the secrecy energy efficiency and the Cramér-Rao boundary.

cs.IT↗

arXiv2025

Static IRS Meets Distributed MIMO: A New Architecture for Dynamic Beamforming

Intelligent reflecting surface (IRS) has been considered as a revolutionary technology to enhance the wireless communication performance. To cater for multiple mobile users, adjusting IRS beamforming patterns over time, i.e., dynamic IRS beamforming (DIBF), is generally needed for achieving satisfactory performance, which results in high controlling power consumption and overhead. To avoid such cost, we propose a new architecture based on the static regulated IRS for wireless coverage enhancement, where the principle of distributed multiple-input multiple-output (D-MIMO) is integrated into the system to exploite the diversity of spatial directions provided by multiple access points (APs). For this new D-MIMO empowered static IRS architecture, the total target area is partitioned into several subareas and each subarea is served by an assigned AP. We consider to maximize the worst-case received power over all locations in the target area by jointly optimizing a single set of IRS beamforming pattern and AP-subarea association. Then, a two-step algorithm is proposed to obtain its high-quality solution. Theoretical analysis unveils that the fundamental squared power gain can still be achieved over all locations in the target area. The performance gap relative to the DIBF scheme is also analytically quantified. Numerical results validate our theoretical findings and demonstrate the effectiveness of our proposed design over benchmark schemes.

cs.IT↗

arXiv2025

6G Communication New Paradigm: The Integration of Unmanned Aerial Vehicles and Intelligent Reflecting Surfaces

With the continuous development of Intelligent Reflecting Surfaces (IRSs) and Unmanned Aerial Vehicles (UAVs), their combination has become foundational technologies to complement the terrestrial network by providing communication enhancement services for large-scale users. This article provides a comprehensive overview of IRS-assisted UAV communications for 6th-Generation (6G) networks. First, the applications supported by IRS-assisted UAV communications for 6G networks are introduced, and key issues originated from applications supported by IRSs and UAVs for 6G networks are summarized and analyzed. Then, prototypes and main technologies related to the integration of IRSs and UAVs are introduced. Driven by applications and technologies of IRS-assisted UAV communications, existing solutions in the realms of energy-constrained communications, secure communications, and enhanced communications are summarized, and corresponding empirical lessons are provided. Finally, we discuss some research challenges and open issues in IRS-assisted UAV communications, offering directions for the future development.

cs.NI↗

arXiv2025

UAV Swarm-enabled Collaborative Post-disaster Communications in Low Altitude Economy via a Two-stage Optimization Approach

The low-altitude economy (LAE) plays an indispensable role in cargo transportation, healthcare, infrastructure inspection, and especially post-disaster communication. Specifically, unmanned aerial vehicles (UAVs), as one of the core technologies of the LAE, can be deployed to provide communication coverage, facilitate data collection, and relay data for trapped users, thereby significantly enhancing the efficiency of post-disaster response efforts. In this paper, we design an efficient and robust UAV-swarm enabled collaborative self-organizing network to facilitate post-disaster communications. Specifically, a ground device transmits data to UAV swarms, which then use collaborative beamforming (CB) technique to form virtual antenna arrays and relay the data to a remote access point (AP) efficiently. Then, we formulate a rescue-oriented post-disaster transmission rate maximization optimization problem (RPTRMOP). Then, we propose a two-stage optimization approach to address it. In the first stage, the optimal traffic routing and the theoretical upper bound on the transmission rate of the network are derived. In the second stage, we transform the formulated RPTRMOP into a variant named V-RPTRMOP, and a diffusion model-enabled particle swarm optimization (DM-PSO) algorithm is proposed to deal with the V-RPTRMOP. Simulation results show the effectiveness of the proposed two-stage optimization approach in improving the transmission rate of the constructed network, which demonstrates the great potential for post-disaster communications. Moreover, the robustness of the constructed network is also validated via evaluating the impact of two unexpected situations on the system transmission rate.

cs.NI↗

arXiv2024

Throughput Maximization for UAV-enabled Integrated Periodic Sensing and Communication

Unmanned aerial vehicle (UAV) is expected to revolutionize the existing integrated sensing and communication (ISAC) system and promise a more flexible joint design. Nevertheless, the existing works on ISAC mainly focus on exploring the performance of both functionalities simultaneously during the entire considered period, which may ignore the practical asymmetric sensing and communication requirements. In particular, always forcing sensing along with communication may make it is harder to balance between these two functionalities due to shared spectrum resources and limited transmit power. To address this issue, we propose a new integrated periodic sensing and communication mechanism for the UAV-enabled ISAC system to provide a more flexible trade-off between two integrated functionalities. Specifically, the system achievable rate is maximized via jointly optimizing UAV trajectory, user association, target sensing selection, and transmit beamforming, while meeting the sensing frequency and beam pattern gain requirement for the given targets. Despite that this problem is highly non-convex and involves closely coupled integer variables, we derive the closed-form optimal beamforming vector to dramatically reduce the complexity of beamforming design, and present a tight lower bound of the achievable rate to facilitate UAV trajectory design. Based on the above results, we propose a penalty-based algorithm to efficiently solve the considered problem. The optimal achievable rate and the optimal UAV location are analyzed under a special case of infinity number of antennas. Furthermore, we prove the structural symmetry between the optimal solutions in different ISAC frames without location constraints and propose an efficient algorithm for solving the problem with location constraints.

cs.IT↗

arXiv2024

Movable Intelligent Surface (MIS) for Wireless Communications: Architecture, Modeling, Algorithm, and Prototyping

Reconfigurable intelligent surfaces enhance wireless systems by reshaping propagation environments. However, dynamic metasurfaces (MSs) with numerous phase-shift elements incur undesired control and hardware costs. In contrast, static MSs (SMSs), configured with static phase shifts pre-designed for specific communication demands, offer a cost-effective alternative by eliminating element-wise tuning. Nevertheless, SMSs typically support a single beam pattern with limited flexibility. In this paper, we propose a novel Movable Intelligent Surface (MIS) technology that enables dynamic beamforming while maintaining static phase shifts. Specifically, we design a MIS architecture comprising two closely stacked transmissive MSs: a larger fixed-position MS 1 and a smaller movable MS 2. By differentially shifting MS 2's position relative to MS 1, the MIS synthesizes distinct beam patterns. Then, we model the interaction between MS 2 and MS 1 using binary selection matrices and padding vectors and formulate a new optimization problem that jointly designs the MIS phase shifts and selects shifting positions for worst-case signal-to-noise ratio maximization. This position selection, equal to beam pattern scheduling, offers a new degree of freedom for RIS-aided systems. To solve the intractable problem, we develop an efficient algorithm that handles unit-modulus and binary constraints and employs manifold optimization methods. Finally, extensive validation results are provided. We implement a MIS prototype and perform proof-of-concept experiments, demonstrating the MIS's ability to synthesize desired beam patterns that achieve one-dimensional beam steering. Numerical results show that by introducing MS 2 with a few elements, MIS effectively offers beamforming flexibility for significantly improved performance. We also draw insights into the optimal MIS configuration and element allocation strategy.

eess.SP↗

arXiv2024

Low Time Complexity Near-Field Channel and Position Estimations

With the application of high-frequency communication and extremely large MIMO (XL-MIMO), the near-field effect has become increasingly apparent. The near-field channel estimation and position estimation problems both rely on the Angle of Arrival (AoA) and the Curvature of Arrival (CoA) estimation. However, in the near-field channel model, the coupling of AoA and CoA information poses a challenge to the estimation of the near-field channel. This paper proposes a Joint Autocorrelation and Cross-correlation (JAC) scheme to decouple AoA and CoA estimation. Based on the JAC scheme, we propose two specific near-field estimation algorithms, namely Inverse Sinc Function (JAC-ISF) and Gradient Descent (JAC-GD) algorithms. Finally, we analyzed the time complexity of the JAC scheme and the cramer-rao lower bound (CRLB) for near-field position estimation. The simulation experiment results show that the algorithm designed based on JAC scheme can solve the problem of coupled CoA and AoA information in near-field estimation, thereby improving the algorithm performance. The JAC-GD algorithm shows significant performance in channel estimation and position estimation at different SNRs, snapshot points, and communication distances compared to other algorithms. This indicates that the JAC-GD algorithm can achieve more accurate channel and position estimation results while saving time overhead.

cs.IT↗

arXiv2024

Efficient Joint Precoding Design for Wideband Intelligent Reflecting Surface-Assisted Cell-Free Network

In this paper, we propose an efficient joint precoding design method to maximize the weighted sum-rate in wideband intelligent reflecting surface (IRS)-assisted cell-free networks by jointly optimizing the active beamforming of base stations and the passive beamforming of IRS. Due to employing wideband transmissions, the frequency selectivity of IRSs has to been taken into account, whose response usually follows a Lorentzian-like profile. To address the high-dimensional non-convex optimization problem, we employ a fractional programming approach to decouple the non-convex problem into subproblems for alternating optimization between active and passive beamforming. The active beamforming subproblem is addressed using the consensus alternating direction method of multipliers (CADMM) algorithm, while the passive beamforming subproblem is tackled using the accelerated projection gradient (APG) method and Flecher-Reeves conjugate gradient method (FRCG). Simulation results demonstrate that our proposed approach achieves significant improvements in weighted sum-rate under various performance metrics compared to primal-dual subgradient (PDS) with ideal reflection matrix. This study provides valuable insights for computational complexity reduction and network capacity enhancement.

eess.SP↗

arXiv2024

Throughput Maximization for Movable Antenna Systems with Movement Delay Consideration

In this paper, we model the minimum achievable throughput within a transmission block of restricted duration and aim to maximize it in movable antenna (MA)-enabled multiuser downlink communications. Particularly, we account for the antenna moving delay caused by mechanical movement, which has not been fully considered in previous studies, and reveal the trade-off between the delay and signal-to-interference-plus-noise ratio at users. To this end, we first consider a single-user setup to analyze the necessity of antenna movement. By quantizing the virtual angles of arrival, we derive the requisite region size for antenna moving, design the initial MA position, and elucidate the relationship between quantization resolution and moving region size. Furthermore, an efficient algorithm is developed to optimize MA position via successive convex approximation, which is subsequently extended to the general multiuser setup. Numerical results demonstrate that the proposed algorithms outperform fixed-position antenna schemes and existing ones without consideration of movement delay. Additionally, our algorithms exhibit excellent adaptability and stability across various transmission block durations and moving region sizes, and are robust to different antenna moving speeds. This allows the hardware cost of MA-aided systems to be reduced by employing low rotational speed motors.

cs.IT↗

arXiv2024

A Survey on Integrated Sensing and Communication with Intelligent Metasurfaces: Trends, Challenges, and Opportunities

The emergence of technologies demanding high data rates and precise sensing, such as autonomous vehicles and IoT devices, has driven the popularity of integrated sensing and communication (ISAC) in recent years. ISAC provides a framework for communication and sensing, where both functionalities are performed simultaneously or in a coordinated manner. There are two levels of integration in ISAC: radio-communications coexistence (RCC), where communication and radar systems use distinct hardware, waveforms, and signal processing but share the spectrum; and dual-function radar-communications (DFRC), where communication and sensing share the same hardware, waveform, and signal processing. At the architectural level, intelligent metasurfaces are a key enabler for the sixth-generation (6G) of wireless communication due to their ability to control the propagation environment efficiently. With the potential to enhance communication and sensing performance, numerous studies have explored the gains of metasurfaces for ISAC. Moreover, certain ISAC frameworks address limitations associated with reconfigurable intelligent surfaces (RIS) for communication. Thus, integrating ISAC with metasurfaces enhances both technologies. This survey reviews the literature on metasurface-assisted ISAC, detailing challenges and opportunities. To provide a comprehensive overview, we begin with fundamentals of ISAC and metasurfaces. The paper summarizes state-of-the-art studies on metasurface-assisted ISAC, focusing on metasurfaces as separate entities between the transmitter and receiver (known as RIS) and emphasizing RCC and DFRC. We also review work on holographic ISAC, where metasurfaces are part of the transmitter and receiver. For each category, lessons learned, challenges, opportunities, and research directions are highlighted.

eess.SP↗