Search arXiv⌕ Search

arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 145 records · Page 8Linked to original sources

Beamforming Design and Multi-User Scheduling in Transmissive RIS Enabled Distributed Cooperative ISAC Networks with RSMA

In this paper, we propose a novel transmissive reconfigurable intelligent surface (TRIS) transceiver-empowered distributed cooperative integrated sensing and communication (ISAC) network to enhance coverage as well as to enhance wireless environment understanding. Based on the network requirements, the users are categorized into cooperative users (CUEs) and destination users (DUEs), and the CUEs utilize their own resources to serve the DUEs. To realize cooperation, we implement rate-splitting multiple access (RSMA) at the base station (BS), where the common stream is decoded and reencoded at the CUEs and forwarded to the DUEs, while the private stream satisfies the CUEs' own communication requirements. We construct an optimization problem with maximum minimum radar mutual information (RMI) as the objective function to optimize the BS beamforming matrix, the CUE beamforming matrices, the common stream rate vectors, and the user scheduling vectors. Due to the coupling of the optimization variables and non-convex operation, the proposed problem is a non-convex optimization problem that cannot be solved directly. To address the above challenges, we adopt a consensus alternating direction method of multipliers (ADMM) framework to decouple the optimization variables and solve it. Specifically, the problem is decoupled into multiple subproblems and solved by iterative optimization independently until overall convergence is achieved. Finally, numerical results validate the superiority of the proposed scheme in terms of improving communication sum-rate and RMI, and greatly reduce the algorithm complexity.

cs.IT↗

IREE Oriented Active RIS-Assisted Green communication System with Outdated CSI

The rapid evolution of communication technologies has spurred a growing demand for energy-efficient network architectures and performance metrics. Active Reconfigurable Intelligent Surfaces (RIS) are emerging as a key component in green network architectures. Compared to passive RIS, active RIS are equipped with amplifiers on each reflecting element, allowing them to simultaneously reflect and amplify signals, thereby overcoming the double multiplicative fading in the phase response, and improving both system coverage and performance. Additionally, the Integrated Relative Energy Efficiency (IREE) metric, as introduced in [1], addresses the dynamic variations in traffic and capacity over time and space, enabling more energy-efficient wireless systems. Building on these advancements, this paper investigates the problem of maximizing IREE in active RIS-assisted green communication systems. However, acquiring perfect Channel State Information (CSI) in practical systems poses significant challenges and costs. To address this, we derive the average achievable rate based on outdated CSI and formulated the corresponding IREE maximization problem, which is solved by jointly optimizing beamforming at both the base station and RIS. Given the non-convex nature of the problem, we propose an Alternating Optimization Successive Approximation (AOSO) algorithm. By applying quadratic transform and relaxation techniques, we simplify the original problem and alternately optimize the beamforming matrices at the base station and RIS. Furthermore, to handle the discrete constraints of the RIS reflection coefficients, we develop a successive approximation method. Experimental results validate our theoretical analysis of the algorithm's convergence , demonstrating the effectiveness of the proposed algorithm and highlighting the superiority of IREE in enhancing the performance of green communication networks.

eess.SP↗

Sum Rate Maximization for Movable Antenna-Aided Downlink RSMA Systems

Rate splitting multiple access (RSMA) is regarded as a crucial and powerful physical layer (PHY) paradigm for next-generation communication systems. Particularly, users employ successive interference cancellation (SIC) to decode part of the interference while treating the remainder as noise. However, conventional RSMA systems rely on fixed-position antenna arrays, limiting their ability to fully exploit spatial diversity. This constraint reduces beamforming gain and significantly impairs RSMA performance. To address this problem, we propose a movable antenna (MA)-aided RSMA scheme that allows the antennas at the base station (BS) to dynamically adjust their positions. Our objective is to maximize the system sum rate of common and private messages by jointly optimizing the MA positions, beamforming matrix, and common rate allocation. To tackle the formulated non-convex problem, we apply fractional programming (FP) and develop an efficient two-stage, coarse-to-fine-grained searching (CFGS) algorithm to obtain high-quality solutions. Numerical results demonstrate that, with optimized antenna adjustments, the MA-enabled system achieves substantial performance and reliability improvements in RSMA over fixed-position antenna setups.

cs.IT↗

Model Predictive Control Enabled UAV Trajectory Optimization and Secure Resource Allocation

In this paper, we investigate a secure communication architecture based on unmanned aerial vehicle (UAV), which enhances the security performance of the communication system through UAV trajectory optimization. We formulate a control problem of minimizing the UAV flight path and power consumption while maximizing secure communication rate over infinite horizon by jointly optimizing UAV trajectory, transmit beamforming vector, and artificial noise (AN) vector. Given the non-uniqueness of optimization objective and significant coupling of the optimization variables, the problem is a non-convex optimization problem which is difficult to solve directly. To address this complex issue, an alternating-iteration technique is employed to decouple the optimization variables. Specifically, the problem is divided into three subproblems, i.e., UAV trajectory, transmit beamforming vector, and AN vector, which are solved alternately. Additionally, considering the susceptibility of UAV trajectory to disturbances, the model predictive control (MPC) approach is applied to obtain UAV trajectory and enhance the system robustness. Numerical results demonstrate the superiority of the proposed optimization algorithm in maintaining accurate UAV trajectory and high secure communication rate compared with other benchmark schemes.

eess.SP↗

Discrete RIS Enhanced Space Shift Keying MIMO System via Reflecting Beamforming Optimization

In this paper, a discrete reconfigurable intelligent surface (RIS)-assisted spatial shift keying (SSK) multiple-input multiple-output (MIMO) scheme is investigated, in which a direct link between the transmitter and the receiver is considered. To improve the reliability of the RIS-SSK-MIMO scheme, we formulate an objective function based on minimizing the average bit error probability (ABEP). Since the reflecting phase shift of RIS is discrete, it is difficult to address this problem directly. To this end, we optimize the RIS phase shift to maximize the Euclidean distance between the minimum constellations by applying the successive convex approximation (SCA) and penaltyalternating optimization method. Simulation results verify the superiority of the proposed RIS-SSK-MIMO scheme and demonstrate the impact of the number of RIS elements, the number of phase quantization bits, and the number of receive and transmit antennas in terms of reliability.

cs.IT↗

Intelligent Reflecting Surface Aided MIMO Networks: Distributed or Centralized Architecture?

We investigate the capacity of a broadcast channel with a multi-antenna base station (BS) sending independent messages to multiple users, aided by IRSs with N elements. In particular, both the distributed and centralized IRS deployment architectures are considered. Regarding the distributed IRS, the N IRS elements form multiple IRSs and each of them is installed near a user cluster; while for the centralized IRS, all IRS elements are located in the vicinity of the BS. To draw essential insights, we first derive the maximum capacity achieved by the distributed IRS and centralized IRS, respectively, under the assumption of line-of-sight propagation and homogeneous channel setups. By capturing the fundamental tradeoff between the spatial multiplexing gain and passive beamforming gain, we rigourously prove that the capacity of the distributed IRS is higher than that of the centralized IRS provided that the total number of IRS elements is above a threshold. Motivated by the superiority of the distributed IRS, we then focus on the transmission and element allocation design under the distributed IRS. By exploiting the user channel correlation of intra-clusters and inter-clusters, an efficient hybrid multiple access scheme relying on both spatial and time domains is proposed to fully exploit both the passive beamforming gain and spatial DoF. Moreover, the IRS element allocation problem is investigated for the objectives of sum-rate maximization and minimum user rate maximization, respectively. Finally, extensive numerical results are provided to validate our theoretical finding and also to unveil the effectiveness of the distributed IRS for improving the system capacity under various system setups.

cs.IT↗

Rechargeable UAV Trajectory Optimization for Real-Time Persistent Data Collection of Large-Scale Sensor Networks

Unmanned aerial vehicles (UAVs) have received plenty of attention due to their high flexibility and enhanced communication ability, nonetheless, the limited onboard energy restricts UAVs' application on persistent data collection missions in large areas. In this paper, we propose a rechargeable UAV-assisted periodic data collection scheme, where a UAV is dispatched to periodically collect data from sensor nodes (SNs) in the mission area and charged by a wireless charging platform. Specifically, the periodic data collection completion time is minimized by optimizing the UAV trajectory to reach the optimal balance among the collection time, flight time, and recharging time. The formulated problem is non-convex and difficult to solve directly. To tackle this problem, we divide the main problem into two sub-problems and address them by leveraging successive convex approximation (SCA), bisection search, and heuristic methods. Then, we propose a periodic trajectory optimization algorithm to iteratively solve the two sub-problems to minimize the completion time. Furthermore, to deal with the dynamics of SNs, we propose a low-complexity trajectory adjustment strategy, where the trajectory can be maintained or adjusted locally at the SNs change, which significantly mitigates the computation cost of re-optimization. The simulation results show the superiority and robustness of the proposed scheme and the completion time is on average 39% and 33% lower than the two benchmarks, respectively.

eess.SP↗

Spatial Multiplexing Oriented Channel Reconfiguration in Multi-IRS Aided MIMO Systems

Spatial multiplexing plays a significant role in improving the capacity of multiple-input multiple-output (MIMO) communication systems. To improve the spectral efficiency (SE) of a point-to-point MIMO system, we exploit the channel reconfiguration capabilities provided by multiple intelligent reflecting surfaces (IRSs) to enhance the spatial multiplexing. Unlike most existing works, we address both the issues of the IRSs placement and elements allocation. To this end, we first introduce an orthogonal placement strategy to mitigate channel correlation, thereby enabling interference-free multi-stream transmission. Subsequently, we propose a successive convex approximation (SCA)-based approach to jointly optimize the IRS elements and power allocation. Our theoretical analysis unveils that equal IRS elements/power allocation scheme becomes asymptotically optimal as the number of IRS elements and transmit power tend to be infinite. Numerical results demonstrate that when the total number of IRS elements or the power exceeds a certain threshold, a multi-IRS assisted system outperforms a single IRS configuration.

cs.IT↗

Towards TMA-Based Transmissive RIS Transceiver Enabled Downlink Communication Networks: A Consensus-ADMM Approach

This paper presents a novel multi-stream downlink communication system that utilizes a transmissive reconfigurable intelligent surface (RIS) transceiver. Specifically, we elaborate the downlink communication scheme using time-modulated array (TMA) technology, which enables high order modulation and multi-stream beamforming. Then, an optimization problem is formulated to maximize the minimum signal-to-interference-plusnoise ratio (SINR) with user fairness, which takes into account the constraint of the maximum available power for each transmissive element. Due to the non-convex nature of the formulated problem,finding optimal solution is challenging. To mitigate the complexity,we propose a linear-complexity beamforming algorithm based on consensus alternating direction method of multipliers (ADMM).Specifically, by introducing a set of auxiliary variables, the problem can be decomposed into multiple sub-problems that are amenable to parallel computation, where the each sub-problem can yield closed-form expressions, bringing a significant reduction in the computational complexity. The overall problem achieves convergence by iteratively addressing these sub-problems in an alternating manner. Finally, the convergence of the proposed algorithm and the impact of various parameter configurations on the system performance are validated through numerical simulations.

eess.SP↗

Joint Transmitter and Receiver Design for Movable Antenna Enhanced Multicast Communications

Movable antenna (MA) is an emerging technology that utilizes localized antenna movement to achieve better channel conditions for enhancing communication performance. In this paper, we study the MA-enhanced multicast transmission from a base station equipped with multiple MAs to multiple groups of single-MA users. Our goal is to maximize the minimum weighted signal-to-interference-plus-noise ratio (SINR) among all the users by jointly optimizing the position of each transmit/receive MA and the transmit beamforming. To tackle this challenging problem, we first consider the single-group scenario and propose an efficient algorithm based on the techniques of alternating optimization and successive convex approximation. Particularly, when optimizing transmit or receive MA positions, we construct a concave lower bound for the signal-to-noise ratio (SNR) of each user using only the second-order Taylor expansion, which simplifies the problem-solving process compared to the existing two-step approximation method. The proposed design is then extended to the general multi-group scenario. Simulation results show that the proposed algorithm converges faster than the existing two-step approximation method, achieving a 3.4% enhancement in max-min SNR. Moreover, it can improve the max-min SNR/SINR by up to 22.5%, 181.7%, and 343.9% compared to benchmarks employing only receive MAs, only transmit MAs, and both transmit and receive FPAs, respectively.

cs.IT↗

MIMO Precoding Exploiting Extra Degrees of Freedom (DoF) in the Wavenumber Domain

In this paper, we propose an emerging wavenumber-domain precoding scheme to break the limitations of rank-1 channels that merely supports single-stream transmission, enabling simultaneous transmission of multiple data streams. The proposed wavenumber-domain precoding scheme also breaks the Rayleigh distance demarcation, regardless of the far-field and near-field contexts. Specifically, by characterizing the channel response as the superposition of a series of Fourier harmonics specified by different wavenumbers, the degree of freedom (DoF) is dependent on the cardinality of the wavenumber support, based on which the extra DoF is presented. This representation is applicable for both far-field and near-field. Different wavenumber atoms, determined within this support, constitute the codebook for MIMO precoding, in which each atom allows for the transmission of a data stream. Then, to maximize the capacity, it is required to select the wavenumbers associated with the optimal transmission direction, and optimize its power allocation. Finally, our simulation results demonstrate the significant superiority in comparison to the conventional spatial division schemes, with the potential of approaching the theoretical performance upper bound achieved by singular value decomposition (SVD).

eess.SP↗

Robust DOA Estimation Based on Dual Lawson Norm for RIS-Aided Wireless Communication Systems

Reconfigurable intelligent surfaces (RIS) can actively perform beamforming and have become a crucial enabler for wireless systems in the future. The direction-of-arrival (DOA) estimates of RIS received signals can help design the reflection control matrix and improve communication quality. In this paper, we design a RIS-assisted system and propose a robust Lawson norm-based multiple-signal-classification (LN-MUSIC) DOA estimation algorithm for impulsive noise, which is divided into two parts. The first one, the non-convex Lawson norm is used as the error criterion along with a regularization constraint to formulate the optimization problem. Then, a Bregman distance based alternating direction method of multipliers is used to solve the problem and recover the desired signal. The second part is to use the multiple signal classification (MUSIC) to find out the DOAs of targets based on their sparsity in the spatial domain. In addition, we also propose a RIS control matrix optimization strategy that requires no channel state information, which effectively enhances the desired signals and improves the performance of the LN-MUSIC algorithm. A Cramer-Rao-lower-bound (CRLB) of the proposed DOA estimation algorithm is presented and verifies its feasibility. Simulated results show that the proposed robust DOA estimation algorithm based on the Lawson norm can effectively suppress the impact of large outliers caused by impulsive noise on the estimation results, outperforming existing methods.

cs.IT↗

UAV-Mounted Movable Antenna: Joint Optimization of UAV Placement and Antenna Configuration

Recently, movable antennas (MAs) have garnered immense attention due to their capability to favorably alter channel conditions through agile movement. In this letter, we delve into a spectrum sharing system enabled by unmanned aerial vehicle (UAV) mounted MAs, thereby introducing a new degree of freedom vertically alongside the horizontal local mobility for MAs. Our objective is to maximize the minimum beamforming gain for secondary users (SUs) while ensuring that interference to the primary users (PUs) remains below a predefined threshold, which necessitates a joint optimization involving the UAV's height, the antenna weight vector (AWV), and the antenna position vector (APV). However, the formulated optimization problem is non-convex and challenging to solve optimally. To tackle this issue, we propose an alternating optimization algorithm that optimizes the UAV's height, APV and AWV in an iterative manner, thus yielding a near-optimal solution. Numerical results demonstrate the superiority of the proposed scheme as well as its ability to deliver full beamforming gain to SUs with reduced computational complexity.

math.NA↗

On the Performance of RIS-Aided Spatial Modulation for Downlink Transmission

In this study, we explore the performance of a reconfigurable reflecting surface (RIS)-assisted transmit spatial modulation (SM) system for downlink transmission, wherein the deployment of RIS serves the purpose of blind area coverage within the channel. At the receiving end, we present three detectors, i.e., maximum likelihood (ML) detector, two-stage ML detection, and greedy detector to recover the transmitted signal. By utilizing the ML detector, we initially derive the conditional pair error probability expression for the proposed scheme. Subsequently, we leverage the central limit theorem (CLT) to obtain the probability density function of the combined channel. Following this, the Gaussian-Chebyshev quadrature method is applied to derive a closed-form expression for the unconditional pair error probability and establish the union tight upper bound for the average bit error probability (ABEP). Furthermore, we derive a closed-form expression for the ergodic capacity of the proposed RIS-SM scheme. Monte Carlo simulations are conducted not only to assess the complexity and reliability of the three detection algorithms but also to validate the results obtained through theoretical derivation results.

cs.IT↗

Movable Antennas Meet Intelligent Reflecting Surface: When Do We Need Movable Antennas?

Intelligent reflecting surface (IRS) and movable antenna (MA)/fluid antenna (FA) techniques have both received increasing attention in the realm of wireless communications due to their ability to reconfigure and improve wireless channel conditions. In this paper, we investigate the integration of MAs/FAs into an IRS-assisted wireless communication system. In particular, we consider the downlink transmission from a multi-MA base station (BS) to a single-antenna user with the aid of an IRS, aiming to maximize the user's received signal-to-noise ratio (SNR), by jointly optimizing the BS/IRS active/passive beamforming and the MAs' positions. Due to the similar capability of MAs and IRS for channel reconfiguration, we first conduct theoretical analyses of the performance gain of MAs over conventional fixed-position antennas (FPAs) under the line-of-sight (LoS) BS-IRS channel and derive the conditions under which the performance gain becomes more or less significant. Next, to solve the received SNR maximization problem, we propose an alternating optimization (AO) algorithm that decomposes it into two subproblems and solve them alternately. Numerical results are provided to validate our analytical results and evaluate the performance gains of MAs over FPAs under different setups.

cs.IT↗

Resource Management for IRS-Assisted Full-Duplex Integrated Sensing, Communication and Computing Systems

In this paper, we investigate an intelligent reflecting surface (IRS) assisted full-duplex (FD) integrated sensing, communication and computing system. Specifically, an FD base station (BS) provides service for uplink and downlink transmission, and a local cache is connected to the BS through a backhaul link to store data. Meanwhile, active sensing elements are deployed on the IRS to receive target echo signals. On this basis, in order to evaluate the overall performance of the system under consideration, we propose a system utility maximization problem while ensuring the sensing quality, expressed as the difference between the sum of communication throughput, total computation bits (offloading bits and local computation bits) and the total backhaul cost for content delivery. This makes the problem difficult to solve due to the highly non-convex coupling of the optimization variables. To effectively solve this problem, we first design the most effective caching strategy. Then, we develop an algorithm based on weighted minimum mean square error, alternative direction method of multipliers, majorization-minimization framework, semi-definite relaxation techniques, and several complex transformations to jointly solve the optimization variables. Finally, simulation results are provided to verify the utility performance of the proposed algorithm and demonstrate the advantages of the proposed scheme compared with the baseline scheme.

cs.IT↗

Symbiotic Sensing and Communication: Framework and Beamforming Design

In this paper, we propose a novel symbiotic sensing and communication (SSAC) framework, comprising a base station (BS) and a passive sensing node. In particular, the BS transmits communication waveform to serve vehicle users (VUEs), while the sensing node is employed to execute sensing tasks based on the echoes in a bistatic manner, thereby avoiding the issue of self-interference. Besides the weak target of interest, the sensing node tracks VUEs and shares sensing results with BS to facilitate sensing-assisted beamforming. By considering both fully digital arrays and hybrid analog-digital (HAD) arrays, we investigate the beamforming design in the SSAC system. We first derive the Cramer-Rao lower bound (CRLB) of the two-dimensional angles of arrival estimation as the sensing metric. Next, we formulate an achievable sum rate maximization problem under the CRLB constraint, where the channel state information is reconstructed based on the sensing results. Then, we propose two penalty dual decomposition (PDD)-based alternating algorithms for fully digital and HAD arrays, respectively. Simulation results demonstrate that the proposed algorithms can achieve an outstanding data rate with effective localization capability for both VUEs and the weak target. In particular, the HAD beamforming design exhibits remarkable performance gain compared to conventional schemes, especially with fewer radio frequency chains.

eess.SP↗

Transmissive RIS Enabled Transceiver Systems:Architecture, Design Issues and Opportunities

Reconfigurable intelligent surface (RIS) is anticipated to augment the performance of beyond fifth-generation (B5G) and sixth-generation (6G) networks by intelligently manipulating the state of its components. Rather than employing reflective RIS for aided communications, this paper proposes an innovative transmissive RIS-enabled transceiver (TRTC) architecture that can accomplish the functions of traditional multi-antenna systems in a cost-effective and energy-efficient manner. First, the proposed network architecture and its corresponding transmission scheme are elaborated from the perspectives of downlink (DL) and uplink (UL) transmissions. Then, we illustrate several significant advantages and differences of TRTC compared to other multiantenna systems. Furthermore, the downlink modulation and extraction principle based on time-modulation array (TMA) is introduced in detail to tackle the multi-stream communications. Moreover, a near-far field channel model appropriate for this architecture is proposed. Based on the channel model, we summarize some state-of-the-art channel estimation schemes, and the channel estimation scheme of TRTC is also provided. Considering the optimization for DL and UL communications, we present numerical simulations that confirm the superiority of the proposed optimization algorithm. Lastly, numerous prospective research avenues for TRTC systems are delineated to inspire further exploration.

eess.SP↗