arXiv subjects

Ryan Murphy

Publications and source records attributed to Ryan Murphy.

12 recordsLinked to original sources

arXiv2026

Full-Stack High-Volume Quantum Networking Architecture based on Photonic-Integrated Tin Vacancy Centers in Diamond

Solid state quantum emitters are a leading platform for photonic quantum networking with memory nodes. However, the inhomogeneous distribution of quantum emitters, as well as several environmental factors (i.e. strain and electric fields) spread the frequency spectrum of the qubits, making them distinguishable and therefore not a reliable resource for distributed quantum entanglement. In this paper, we demonstrate a full-stack approach to integrating nearly indistinguishable tin vacancy (SnV$^-$) quantum emitters on a frequency-tunable photonic interposer that overcomes the native distribution and static variation of quantum emitters for an indistinguishable photonic quantum networking platform. We demonstrate a silicon nitride-on-insulator photonic integrated circuit (PIC) with accompanying multiphysics digital twin (MPhDT) that guides discovery of SnV$^-$ strain-tuning parameters and informs construction of a multi-channel quantum repeater node. On this node, we achieve the first simultaneous demonstration of spectral tuning of the zero phonon line (ZPL) at GHz scale; coherent electron spin control with gate times of $<80$ ns; strongly- and weakly-coupled nuclear spin detection; and commercial fiber array-coupled readout of a SnV$^-$ center. Finally, we propose and simulate improvements to the architecture that achieve 99.96% connectivity of $ N \sim 1000$ emitters spanning the inhomogeneous distribution of SnV$^-$ centers in strained diamond, where distributed quantum entanglement may be realized.

quant-ph↗

arXiv2025

A Multi-Cloud Framework for Zero-Trust Workload Authentication

Static, long-lived credentials for workload authentication create untenable security risks that violate Zero-Trust principles. This paper presents a multi-cloud framework using Workload Identity Federation (WIF) and OpenID Connect (OIDC) for secretless authentication. Our approach uses cryptographically-verified, ephemeral tokens, allowing workloads to authenticate without persistent private keys and mitigating credential theft. We validate this framework in an enterprise-scale Kubernetes environment, which significantly reduces the attack surface. The model offers a unified solution to manage workload identities across disparate clouds, enabling future implementation of robust, attribute-based access control.

cs.CR↗

arXiv2025

High-Fidelity Control of a Strongly Coupled Electro-Nuclear Spin-Photon Interface

Long distance quantum networking requires combining efficient spin-photon interfaces with long-lived local memories. Group-IV color centers in diamond (SiV, GeV, and SnV) are promising candidates for this application, containing an electronic spin-photon interface and dopant nuclear spin memory. Recent work has demonstrated state-of-the-art performance in spin-photon coupling and spin-spin entanglement. However, coupling between the electron and nuclear spins introduces a phase kickback during optical excitation that limits the utility of the nuclear memory. Here, we propose using the large hyperfine coupling of SnV-117 to operate the device at zero magnetic field in a regime where the memory is insensitive to optical excitation. We further demonstrate ground state spin control of a SnV-117 color center integrated in a photonic integrated circuit, showing 97.8% gate fidelity and 2.5 ms coherence time for the memory spin level. This shows the viability of the zero-field protocol for high fidelity operation, and lays the groundwork for building quantum network nodes with SnV-117 devices.

quant-ph↗

arXiv2024

A scalable cavity-based spin-photon interface in a photonic integrated circuit

A central challenge in quantum networking is transferring quantum states between different physical modalities, such as between flying photonic qubits and stationary quantum memories. One implementation entails using spin-photon interfaces that combine solid-state spin qubits, such as color centers in diamond, with photonic nanostructures. However, while high-fidelity spin-photon interactions have been demonstrated on isolated devices, building practical quantum repeaters requires scaling to large numbers of interfaces yet to be realized. Here, we demonstrate integration of nanophotonic cavities containing tin-vacancy (SnV) centers in a photonic integrated circuit (PIC). Out of a six-channel quantum micro-chiplet (QMC), we find four coupled SnV-cavity devices with an average Purcell factor of ~7. Based on system analyses and numerical simulations, we find with near-term improvements this multiplexed architecture can enable high-fidelity quantum state transfer, paving the way towards building large-scale quantum repeaters.

quant-ph↗

arXiv2023

Development of a Boston-area 50-km fiber quantum network testbed

Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Boston-Area Quantum Network (BARQNET) telecom fiber testbed, measuring the time-of-flight, polarization, and phase noise imparted on transmitted signals. We further design and demonstrate a compensation system that is both resilient to these noise sources and compatible with integration of emerging quantum memory components on the deployed link. These results have utility for future work on the BARQNET as well as other quantum network testbeds in development, enabling near-term quantum networking demonstrations and informing what areas of technology development will be most impactful in advancing future system capabilities.

quant-ph↗

arXiv2023

Telecom networking with a diamond quantum memory

Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy (SiV) center in diamond to the telecom O-band, maintaining low noise ($g^2(0)<0.1$) and high indistinguishability ($V=89\pm8\%$). We further demonstrate the utility of this system for quantum networking by converting telecom-band time-bin pulses, sent across a lossy and noisy 50 km deployed fiber link, to the visible band and mapping their quantum states onto a diamond quantum memory with fidelity $\mathcal{F}=87\pm 2.5 \% $. These results demonstrate the viability of SiV quantum memories integrated with telecom-band systems for scalable quantum networking applications.

quant-ph↗

arXiv2023

A fully packaged multi-channel cryogenic module for optical quantum memories

Realizing a quantum network will require long-lived quantum memories with optical interfaces incorporated into a scalable architecture. Color centers quantum emitters in diamond have emerged as a promising memory modality due to their optical properties and compatibility with scalable integration. However, developing a scalable color center emitter module requires significant advances in the areas of heterogeneous integration and cryogenically compatible packaging. Here we report on a cryogenically stable and network compatible quantum-emitter module for memory use. This quantum-emitter module is a significant development towards advanced quantum networking applications such as distributed sensing and processing.

quant-ph↗

arXiv2019

Automatic Annotation of Hip Anatomy in Fluoroscopy for Robust and Efficient 2D/3D Registration

Fluoroscopy is the standard imaging modality used to guide hip surgery and is therefore a natural sensor for computer-assisted navigation. In order to efficiently solve the complex registration problems presented during navigation, human-assisted annotations of the intraoperative image are typically required. This manual initialization interferes with the surgical workflow and diminishes any advantages gained from navigation. We propose a method for fully automatic registration using annotations produced by a neural network. Neural networks are trained to simultaneously segment anatomy and identify landmarks in fluoroscopy. Training data is obtained using an intraoperatively incompatible 2D/3D registration of hip anatomy. Ground truth 2D labels are established using projected 3D annotations. Intraoperative registration couples an intensity-based strategy with annotations inferred by the network and requires no human assistance. Ground truth labels were obtained in 366 fluoroscopic images across 6 cadaveric specimens. In a leave-one-subject-out experiment, networks obtained mean dice coefficients for left and right hemipelves, left and right femurs of 0.86, 0.87, 0.90, and 0.84. The mean 2D landmark error was 5.0 mm. The pelvis was registered within 1 degree for 86% of the images when using the proposed intraoperative approach with an average runtime of 7 seconds. In comparison, an intensity-only approach without manual initialization, registered the pelvis to 1 degree in 18% of images. We have created the first accurately annotated, non-synthetic, dataset of hip fluoroscopy. By using these annotations as training data for neural networks, state of the art performance in fluoroscopic segmentation and landmark localization was achieved. Integrating these annotations allows for a robust, fully automatic, and efficient intraoperative registration during fluoroscopic navigation of the hip.

cs.CV↗

arXiv2019

Fast and Automatic Periacetabular Osteotomy Fragment Pose Estimation Using Intraoperatively Implanted Fiducials and Single-View Fluoroscopy

Accurate and consistent mental interpretation of fluoroscopy to determine the position and orientation of acetabular bone fragments in 3D space is difficult. We propose a computer assisted approach that uses a single fluoroscopic view and quickly reports the pose of an acetabular fragment without any user input or initialization. Intraoperatively, but prior to any osteotomies, two constellations of metallic ball-bearings (BBs) are injected into the wing of a patient's ilium and lateral superior pubic ramus. One constellation is located on the expected acetabular fragment, and the other is located on the remaining, larger, pelvis fragment. The 3D locations of each BB are reconstructed using three fluoroscopic views and 2D/3D registrations to a preoperative CT scan of the pelvis. The relative pose of the fragment is established by estimating the movement of the two BB constellations using a single fluoroscopic view taken after osteotomy and fragment relocation. BB detection and inter-view correspondences are automatically computed throughout the processing pipeline. The proposed method was evaluated on a multitude of fluoroscopic images collected from six cadaveric surgeries performed bilaterally on three specimens. Mean fragment rotation error was 2.4 +/- 1.0 degrees, mean translation error was 2.1 +/- 0.6 mm, and mean 3D lateral center edge angle error was 1.0 +/- 0.5 degrees. The average runtime of the single-view pose estimation was 0.7 +/- 0.2 seconds. The proposed method demonstrates accuracy similar to other state of the art systems which require optical tracking systems or multiple-view 2D/3D registrations with manual input. The errors reported on fragment poses and lateral center edge angles are within the margins required for accurate intraoperative evaluation of femoral head coverage.

cs.CV↗

arXiv2019

Pelvis Surface Estimation From Partial CT for Computer-Aided Pelvic Osteotomies

Computer-aided surgical systems commonly use preoperative CT scans when performing pelvic osteotomies for intraoperative navigation. These systems have the potential to improve the safety and accuracy of pelvic osteotomies, however, exposing the patient to radiation is a significant drawback. In order to reduce radiation exposure, we propose a new smooth extrapolation method leveraging a partial pelvis CT and a statistical shape model (SSM) of the full pelvis in order to estimate a patient's complete pelvis. A SSM of normal, complete, female pelvis anatomy was created and evaluated from 42 subjects. A leave-one-out test was performed to characterise the inherent generalisation capability of the SSM. An additional leave-one-out test was conducted to measure performance of the smooth extrapolation method and an existing "cut-and-paste" extrapolation method. Unknown anatomy was simulated by keeping the axial slices of the patient's acetabulum intact and varying the amount of the superior iliac crest retained; from 0% to 15% of the total pelvis extent. The smooth technique showed an average improvement over the cut-and-paste method of 1.31 mm and 3.61 mm, in RMS and maximum surface error, respectively. With 5% of the iliac crest retained, the smoothly estimated surface had an RMS surface error of 2.21 mm, an improvement of 1.25 mm when retaining none of the iliac crest. This anatomical estimation method creates the possibility of a patient and surgeon benefiting from the use of a CAS system and simultaneously reducing the patient's radiation exposure.

cs.CV↗

arXiv2019

Smooth Extrapolation of Unknown Anatomy via Statistical Shape Models

Several methods to perform extrapolation of unknown anatomy were evaluated. The primary application is to enhance surgical procedures that may use partial medical images or medical images of incomplete anatomy. Le Fort-based, face-jaw-teeth transplant is one such procedure. From CT data of 36 skulls and 21 mandibles separate Statistical Shape Models of the anatomical surfaces were created. Using the Statistical Shape Models, incomplete surfaces were projected to obtain complete surface estimates. The surface estimates exhibit non-zero error in regions where the true surface is known; it is desirable to keep the true surface and seamlessly merge the estimated unknown surface. Existing extrapolation techniques produce non-smooth transitions from the true surface to the estimated surface, resulting in additional error and a less aesthetically pleasing result. The three extrapolation techniques evaluated were: copying and pasting of the surface estimate (non-smooth baseline), a feathering between the patient surface and surface estimate, and an estimate generated via a Thin Plate Spline trained from displacements between the surface estimate and corresponding vertices of the known patient surface. Feathering and Thin Plate Spline approaches both yielded smooth transitions. However, feathering corrupted known vertex values. Leave-one-out analyses were conducted, with 5% to 50% of known anatomy removed from the left-out patient and estimated via the proposed approaches. The Thin Plate Spline approach yielded smaller errors than the other two approaches, with an average vertex error improvement of 1.46 mm and 1.38 mm for the skull and mandible respectively, over the baseline approach.

cs.CV↗

arXiv2018

FBG-Based Control of a Continuum Manipulator Interacting With Obstacles

Tracking and controlling the shape of continuum dexterous manipulators (CDM) in constraint environments is a challenging task. The imposed constraints and interaction with unknown obstacles may conform the CDM's shape and therefore demands for shape sensing methods which do not rely on direct line of sight. To address these issues, we integrate a novel Fiber Bragg Grating (FBG) shape sensing unit into a CDM, reconstruct the shape in real-time, and develop an optimization-based control algorithm using FBG tip position feedback. The CDM is designed for less-invasive treatment of osteolysis (bone degradation). To evaluate the performance of the feedback control algorithm when the CDM interacts with obstacles, we perform a set of experiments similar to the real scenario of the CDM interaction with soft and hard lesions during the treatment of osteolysis. In addition, we propose methods for identification of the CDM collisions with soft or hard obstacles using the jacobian information. Results demonstrate successful control of the CDM tip based on the FBG feedback and indicate repeatability and robustness of the proposed method when interacting with unknown obstacles.

cs.RO↗