arXiv subjects

S. Cap

Publications and source records attributed to S. Cap.

13 recordsLinked to original sources

arXiv2026

The Super Fine-Grained Detector for the T2K neutrino oscillation experiment

The magnetised near detector ND280 of the long-baseline neutrino experiment T2K has been upgraded to improve its detection performance and, consequently, enhance our understanding of neutrino-nucleus interactions, reducing the systematic uncertainties in measurements of the neutrino oscillation parameters. A key component of the upgrade is a novel segmented plastic scintillator detector, called the Super Fine-Grained Detector (SuperFGD), made of approximately 2 million optically isolated 1 cm$^3$ cubes read out by three orthogonal wavelength-shifting (WLS) fibres. Scintillation photons are detected by 55,888 Hamamatsu Multi-Pixel Photon Counters (MPPCs). The SuperFGD provides 3D images of neutrino interactions by tracking the final-state charged particles produced isotropically, including protons down to a threshold of around 330 MeV/$c$. The high light yield of SuperFGD greatly improves particle identification and the sub-nanosecond time resolution provides an excellent identification of Michel electrons. The SuperFGD is also able to detect neutrons from neutrino interactions and, for the first time in a neutrino experiment, to reconstruct their kinetic energy using a fine detector segmentation and by measuring the time-of-flight with sub-nanosecond precision. In this article the details of the detector design, construction and performance are described. The detector was installed in ND280 and successfully commissioned with cosmic data in 2023 and, later, with the T2K neutrino beam. The detector response has been characterised with the 2023 and 2024 data and the results are reported in this article.

physics.ins-det↗

arXiv2025

Joint neutrino oscillation analysis from the T2K and NOvA experiments

The landmark discovery that neutrinos have mass and can change type (or "flavor") as they propagate -- a process called neutrino oscillation -- has opened up a rich array of theoretical and experimental questions being actively pursued today. Neutrino oscillation remains the most powerful experimental tool for addressing many of these questions, including whether neutrinos violate charge-parity (CP) symmetry, which has possible connections to the unexplained preponderance of matter over antimatter in the universe. Oscillation measurements also probe the mass-squared differences between the different neutrino mass states ($\Delta m^2$), whether there are two light states and a heavier one (normal ordering) or vice versa (inverted ordering), and the structure of neutrino mass and flavor mixing. Here, we carry out the first joint analysis of data sets from NOvA and T2K, the two currently operating long-baseline neutrino oscillation experiments (hundreds of kilometers of neutrino travel distance), taking advantage of our complementary experimental designs and setting new constraints on several neutrino sector parameters. This analysis provides new precision on the $\Delta m^2_{32}$ mass difference, finding $2.43^{+0.04}_{-0.03}\ \left(-2.48^{+0.03}_{-0.04}\right)\times 10^{-3}~\mathrm{eV}^2$ in the normal (inverted) ordering, as well as a $3\sigma$ interval on $\delta_{\rm CP}$ of $[-1.38\pi,\ 0.30\pi]$ $\left([-0.92\pi,\ -0.04\pi]\right)$ in the normal (inverted) ordering. The data show no strong preference for either mass ordering, but notably if inverted ordering were assumed true within the three-flavor mixing paradigm, then our results would provide evidence of CP symmetry violation in the lepton sector.

hep-ex↗

arXiv2025

Measurement of muon neutrino induced charged current interactions without charged pions in the final state using a new T2K off-axis near detector WAGASCI-BabyMIND

We report a flux-integrated cross section measurement of muon neutrino interactions on water and hydrocarbon via charged current reactions without charged pions in the final state with the WAGASCI-BabyMIND detector which was installed in the T2K near detector hall in 2018. The detector is located 1.5$^\circ$ off-axis and is exposed to a more energetic neutrino flux than ND280, another T2K near detector, which is located at a different off-axis position. The total flux-integrated cross section is measured to be $1.26 \pm 0.18\,(stat.+syst.) \times 10^{-39} $ $\mathrm{cm^{2}/nucleon}$ on CH and $1.44 \pm 0.21\,(stat.+syst.) \times 10^{-39} $ $\mathrm{cm^{2}/nucleon}$ on H$_{2}$O. These results are compared to model predictions provided by the NEUT v5.3.2 and GENIE v2.8.0 MC generators and the measurements are compatible with these models. Differential cross sections in muon momentum and cosine of the muon scattering angle are also reported. This is the first such measurement reported with the WAGASCI-BabyMIND detector and utilizes the 2020 and 2021 datasets.

hep-ex↗

arXiv2025

Introducing a Markov Chain-Based Time Calibration Procedure for Multi-Channel Particle Detectors: Application to the SuperFGD and ToF Detectors of the T2K Experiment

Inter-channel mis-synchronisation can be a limiting factor to the time resolution of high performance timing detectors with multiple readout channels and independent electronics units. In these systems, time calibration methods employed must be able to efficiently correct for minimal mis-synchronisation between channels and achieve the best detector performance. We present an iterative time calibration method based on Markov Chains, suitable for detector systems with multiple readout channels. Starting from correlated hit pairs alone, and without requiring an external reference time measurement, the method solves for fixed per-channel offsets, with precision limited only by the intrinsic single-channel resolution. A mathematical proof that the method is able to find the correct time offsets to be assigned to each detector channel in order to achieve inter-channel synchronisation is given, and it is shown that the number of iterations to reach convergence within the desired precision is controllable with a single parameter. Numerical studies are used to confirm unbiased recovery of true offsets. Finally, the application of the calibration method to the Super Fine-Grained Detector (SuperFGD) and the Time of Flight (TOF) detector at the upgraded T2K near detector (ND280) shows good improvement in overall timing resolution, demonstrating the effectiveness in a real-world scenario and scalability.

physics.ins-det↗

arXiv2025

Testing T2K's Bayesian constraints with priors in alternate parameterisations

Bayesian analysis results require a choice of prior distribution. In long-baseline neutrino oscillation physics, the usual parameterisation of the mixing matrix induces a prior that privileges certain neutrino mass and flavour state symmetries. Here we study the effect of privileging alternate symmetries on the results of the T2K experiment. We find that constraints on the level of CP violation (as given by the Jarlskog invariant) are robust under the choices of prior considered in the analysis. On the other hand, the degree of octant preference for the atmospheric angle depends on which symmetry has been privileged.

hep-ex↗

arXiv2025

Results from the T2K experiment on neutrino mixing including a new far detector $\mu$-like sample

We have made improved measurements of three-flavor neutrino mixing with 19.7(16.3)$\times 10^{20}$ protons on target in (anti-)neutrino-enhanced beam modes. A new sample of muon-neutrino events with tagged pions has been added at the far detector, as well as new proton and photon-tagged samples at the near detector. Significant improvements have been made to the flux and neutrino interaction modeling. T2K data continue to prefer the normal mass ordering and upper octant of $\sin^2\theta_{23}$ with a near-maximal value of the charge-parity violating phase with best-fit values in the normal ordering of $\delta_{\scriptscriptstyle\mathrm{CP}}=-2.18\substack{+1.22 \\ -0.47}$, $\sin^2\theta_{23}=0.559\substack{+0.018 \\ -0.078}$ and $\Delta{}m^2_{32}=(+2.506\substack{+0.039 \\ -0.052})\times 10^{-3}$ eV$^{2}$.

hep-ex↗

arXiv2025

First Measurement of the Electron Neutrino Charged-Current Pion Production Cross Section on Carbon with the T2K Near Detector

The T2K Collaboration presents the first measurement of electron neutrino-induced charged-current pion production on carbon in a restricted kinematical phase space. This is performed using data from the 2.5$^{\deg}$ off-axis near detector, ND280. The differential cross sections with respect to the outgoing electron and pion kinematics, in addition to the total flux-integrated cross section, are obtained. Comparisons between the measured and predicted cross section results using the Neut, Genie and NuWro Monte Carlo event generators are presented. The measured total flux-integrated cross section is [2.52 $\pm$ 0.52 (stat) $\pm$ 0.30 (sys)] x $10^{-39}$ cm$^2$ nucleon$^{-1}$, which is lower than the event generator predictions.

hep-ex↗

arXiv2025

Signal selection and model-independent extraction of the neutrino neutral-current single $\pi^+$ cross section with the T2K experiment

This article presents a study of single $\pi^+$ production in neutrino neutral-current interactions (NC1$\pi^+$) using the FGD1 hydrocarbon target of the ND280 detector of the T2K experiment. We report the largest sample of such events selected by any experiment, providing the first new data for this channel in over four decades and the first using a sub-GeV neutrino flux. The signal selection strategy and its performance are detailed together with validations of a robust cross section extraction methodology. The measured flux-averaged integrated cross-section is $ \sigma = (6.07 \pm 1.22 )\times 10^{-41} \,\, \text{cm}^2/\text{nucleon}$, 1.3~$\sigma~$ above the NEUT v5.4.0 expectation.

hep-ex↗

arXiv2025

First differential measurement of the single $\mathbf{\pi}^+$ production cross section in neutrino neutral-current scattering

Since its first observation in the 1970s, neutrino-induced neutral-current single positive pion production (NC1$\pi^+$) has remained an elusive and poorly understood interaction channel. This process is a significant background in neutrino oscillation experiments and studying it further is critical for the physics program of next-generation accelerator-based neutrino oscillation experiments. In this Letter we present the first double-differential cross-section measurement of NC1$\pi^+$ interactions using data from the ND280 detector of the T2K experiment collected in $\nu$-beam mode. The measured flux-averaged integrated cross-section is $ \sigma = (6.07 \pm 1.22 )\times 10^{-41} \,\, \text{cm}^2/\text{nucleon}$. We compare the results on a hydrocarbon target to the predictions of several neutrino interaction generators and final-state interaction models. While model predictions agree with the differential results, the data shows a weak preference for a cross-section normalization approximately 30\% higher than predicted by most models studied in this Letter.

hep-ex↗

arXiv2022

The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters

The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system.

physics.ins-det↗

arXiv2015

Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter

A large prototype of 1.3m3 was designed and built as a demonstrator of the semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each unit is built of an active layer made of 1m2 Glass Resistive Plate Chamber(GRPC) detector placed inside a cassette whose walls are made of stainless steel. The cassette contains also the electronics used to read out the GRPC detector. The lateral granularity of the active layer is provided by the electronics pick-up pads of 1cm2 each. The cassettes are inserted into a self-supporting mechanical structure built also of stainless steel plates which, with the cassettes walls, play the role of the absorber. The prototype was designed to be very compact and important efforts were made to minimize the number of services cables to optimize the efficiency of the Particle Flow Algorithm techniques to be used in the future ILC experiments. The different components of the SDHCAL prototype were studied individually and strict criteria were applied for the final selection of these components. Basic calibration procedures were performed after the prototype assembling. The prototype is the first of a series of new-generation detectors equipped with a power-pulsing mode intended to reduce the power consumption of this highly granular detector. A dedicated acquisition system was developed to deal with the output of more than 440000 electronics channels in both trigger and triggerless modes. After its completion in 2011, the prototype was commissioned using cosmic rays and particles beams at CERN.

physics.ins-det↗

arXiv2011

Micromegas for imaging hadronic calorimetry

The recent progress in R&D of the Micromegas detectors for hadronic calorimetry including new engineering-technical solutions, electronics development, and accompanying simulation studies with emphasis on the comparison of the physics performance of the analog and digital readout is described. The developed prototypes are with 2 bit digital readout to exploit the Micromegas proportional mode and thus improve the calorimeter linearity. In addition, measurements of detection efficiency, hit multiplicity, and energy shower profiles obtained during the exposure of small size prototypes to radioactive source quanta, cosmic particles and accelerator beams are reported. Eventually, the status of a large scale chamber (1{\times}1 m2) are also presented with prospective towards the construction of a 1 m3 digital calorimeter consisting of 40 such chambers.

physics.ins-det↗

arXiv2009

MICROMEGAS chambers for hadronic calorimetry at a future linear collider

Prototypes of MICROMEGAS chambers, using bulk technology and analog readout, with 1x1cm2 readout segmentation have been built and tested. Measurements in Ar/iC4H10 (95/5) and Ar/CO2 (80/20) are reported. The dependency of the prototypes gas gain versus pressure, gas temperature and amplification gap thickness variations has been measured with an 55Fe source and a method for temperature and pressure correction of data is presented. A stack of four chambers has been tested in 200GeV/c and 7GeV/c muon and pion beams respectively. Measurements of response uniformity, detection efficiency and hit multiplicity are reported. A bulk MICROMEGAS prototype with embedded digital readout electronics has been assembled and tested. The chamber layout and first results are presented.

physics.ins-det↗