arXiv subjects

Xin Wang

Publications and source records attributed to Xin Wang.

At least 1,441 records · Page 80Linked to original sources

arXiv2020

Influence of ground-Rydberg coherence in two-qubit gate based on Rydberg blockade

For neutral atom qubits, the two-qubit gate is typically realized via the Rydberg blockade effect, which hints about the special status of the Rydberg level besides the regular qubit register states. Here, we carry out experimental and theoretical studies to reveal how the ground-Rydberg coherence of the control qubit atom affects the process of two-qubit Controlled-Z ($C_Z$) gate, such as the commonly used ground-Rydberg $π$-gap-$π$ pulse sequence originally proposed in Phys. Rev. Lett. \textbf{85}, 2208 (2000). We measure the decoherence of the control qubit atom after the $π$-gap-$π$ pulses and make a direct comparison with the typical decoherence time $τ_{gr}$ extracted from Ramsey fringes of the ground-Rydberg transition. In particular, we observe that the control qubit atom subject to such pulse sequences experiences a process which is essentially similar to the ground-Rydberg Ramsey interference. Furthermore, we build a straightforward theoretical model to link the decoherence process of control qubit subject to $C_Z$ gate $π$-gap-$π$ pulse sequence and the $τ_{gr}$, and also analyze the typical origins of decoherence effects. Finally, we discuss the $C_Z$ gate fidelity loss due to the limits imposed by the ground-Rydberg coherence properties and prospective for improving fidelity with new gate protocols.

quant-ph↗

arXiv2020

Joint Optimization of Trajectory, Propulsion and Thrust Powers for Covert UAV-on-UAV Video Tracking and Surveillance

Autonomous tracking of suspicious unmanned aerial vehicles (UAVs) by legitimate monitoring UAVs (or monitors) can be crucial to public safety and security. It is non-trivial to optimize the trajectory of a monitor while conceiving its monitoring intention, due to typically non-convex propulsion and thrust power functions. This paper presents a novel framework to jointly optimize the propulsion and thrust powers, as well as the 3D trajectory of a solar-powered monitor which conducts covert, video-based, UAV-on-UAV tracking and surveillance. A multi-objective problem is formulated to minimize the energy consumption of the monitor and maximize a weighted sum of distance keeping and altitude changing, which measures the disguising of the monitor. Based on the practical power models of the UAV propulsion, thrust and hovering, and the model of the harvested solar power, the problem is non-convex and intangible for existing solvers. We convexify the propulsion power by variable substitution, and linearize the solar power. With successive convex approximation, the resultant problem is then transformed with tightened constraints and efficiently solved by the proximal difference-of-convex algorithm with extrapolation in polynomial time. The proposed scheme can be also applied online. Extensive simulations corroborate the merits of the scheme, as compared to baseline schemes with partial or no disguising.

eess.SP↗

arXiv2020

Uncertainty Quantification and Composition Optimization for Alloy Additive Manufacturing Through a CALPHAD-based ICME Framework

During powder production, the pre-alloyed powder composition often deviates from the target composition leading to undesirable properties of additive manufacturing (AM) components. Therefore, we developed a method to perform high-throughput calculation and uncertainty quantification by using a CALPHAD-based ICME framework (CALPHAD: calculations of phase diagrams, ICME: integrated computational materials engineering) to optimize the composition, and took the high-strength low-alloy steel (HSLA) as a case study. We analyzed the process-structure-property relationships for 450,000 compositions around the nominal composition of HSLA-115. Properties that are critical for the performance, such as yield strength, impact transition temperature, and weldability, were evaluated to optimize the composition. With the same uncertainty as the initial composition, an optimized average composition has been determined, which increased the probability of achieving successful AM builds by 44.7%. The present strategy is general and can be applied to other alloy composition optimization to expand the choices of alloy for additive manufacturing. Such a method also calls for high-quality CALPHAD databases and predictive ICME models.

cond-mat.mtrl-sci↗

arXiv2020

Modeling confirmation bias and peer pressure in opinion dynamics

Confirmation bias and peer pressure both have substantial impacts on the formation of collective decisions. Nevertheless, few attempts have been made to study how the interplay between these two mechanisms affects public opinion evolution. Here we propose an agent-based model of opinion dynamics which incorporates the conjugate effect of confirmation bias (characterized by the population identity scope and individual stubbornness) and peer pressure (described by a susceptibility threshold). We show that the number of opinion fragments first increases and then decreases to one as population identity scope becomes larger in a homogeneous population. Further, in heterogeneous situations, we find that even a small fraction of impressionable individuals who are sensitive to peer pressure could help eliminate public polarization when population identity scope is relatively large. Intriguingly, we highlight the emergence of 'impressionable moderates' who are easily influenced, hold wavering opinions, and are of vital significance in competitive campaigns.

physics.soc-ph↗

arXiv2020

Spatial Heterogeneity Automatic Detection and Estimation

Spatial regression is widely used for modeling the relationship between a dependent variable and explanatory covariates. Oftentimes, the linear relationships vary across space, when some covariates have location-specific effects on the response. One fundamental question is how to detect the systematic variation in the model and identify which locations share common regression coefficients and which do not. Only a correct model structure can assure unbiased estimation of coefficients and valid inferences. In this work, we propose a new procedure, called Spatial Heterogeneity Automatic Detection and Estimation (SHADE), for automatically and simultaneously subgrouping and estimating covariate effects for spatial regression models. The SHADE employs a class of spatially-weighted fusion type penalty on all pairs of observations, with location-specific weight adaptively constructed using spatial information, to cluster coefficients into subgroups. Under certain regularity conditions, the SHADE is shown to be able to identify the true model structure with probability approaching one and estimate regression coefficients consistently. We develop an alternating direction method of multiplier algorithm (ADMM) to compute the SHAD efficiently. In numerical studies, we demonstrate empirical performance of the SHADE by using different choices of weights and compare their accuracy. The results suggest that spatial information can enhance subgroup structure analysis in challenging situations when the spatial variation among regression coefficients is small or the number of repeated measures is small. Finally, the SHADE is applied to find the relationship between a natural resource survey and a land cover data layer to identify spatially interpretable groups.

stat.ME↗

arXiv2020

Matching preclusion and strong matching preclusion of the bubble-sort star graphs

Since a plurality of processors in a distributed computer system working in parallel, to ensure the fault tolerance and stability of the network is an important issue in distributed systems. As the topology of the distributed network can be modeled as a graph, the (strong) matching preclusion in graph theory can be used as a robustness measure for missing edges in parallel and distributed networks, which is defined as the minimum number of (vertices and) edges whose deletion results in the remaining network that has neither a perfect matching nor an almost-perfect matching. The bubble-sort star graph is one of the validly discussed interconnection networks related to the distributed systems. In this paper, we show that the strong matching preclusion number of an $n$-dimensional bubble-sort star graph $BS_n$ is $2$ for $n\geq3$ and each optimal strong matching preclusion set of $BS_n$ is a set of two vertices from the same bipartition set. Moreover, we show that the matching preclusion number of $BS_n$ is $2n-3$ for $n\geq3$ and that every optimal matching preclusion set of $BS_n$ is trivial.

math.CO↗

arXiv2020

Observation of non-Hermitian topology with non-unitary dynamics of solid-state spins

Non-Hermitian topological phases exhibit a number of exotic features that have no Hermitian counterparts, including the skin effect and breakdown of the conventional bulk-boundary correspondence. Here, we implement the non-Hermitian Su-Schrieffer-Heeger (SSH) Hamiltonian, which is a prototypical model for studying non-Hermitian topological phases, with a solid-state quantum simulator consisting of an electron spin and a $^{13}$C nuclear spin in a nitrogen-vacancy (NV) center in a diamond. By employing a dilation method, we realize the desired non-unitary dynamics for the electron spin and map out its spin texture in the momentum space, from which the corresponding topological invariant can be obtained directly. Our result paves the way for further exploiting and understanding the intriguing properties of non-Hermitian topological phases with solid-state spins or other quantum simulation platforms.

quant-ph↗

arXiv2020

VSQL: Variational Shadow Quantum Learning for Classification

Classification of quantum data is essential for quantum machine learning and near-term quantum technologies. In this paper, we propose a new hybrid quantum-classical framework for supervised quantum learning, which we call Variational Shadow Quantum Learning (VSQL). Our method in particular utilizes the classical shadows of quantum data, which fundamentally represent the side information of quantum data with respect to certain physical observables. Specifically, we first use variational shadow quantum circuits to extract classical features in a convolution way and then utilize a fully-connected neural network to complete the classification task. We show that this method could sharply reduce the number of parameters and thus better facilitate quantum circuit training. Simultaneously, less noise will be introduced since fewer quantum gates are employed in such shadow circuits. Moreover, we show that the Barren Plateau issue, a significant gradient vanishing problem in quantum machine learning, could be avoided in VSQL. Finally, we demonstrate the efficiency of VSQL in quantum classification via numerical experiments on the classification of quantum states and the recognition of multi-labeled handwritten digits. In particular, our VSQL approach outperforms existing variational quantum classifiers in the test accuracy in the binary case of handwritten digit recognition and notably requires much fewer parameters.

quant-ph↗

arXiv2020

DiffPerf: Towards Performance Differentiation and Optimization with SDN Implementation

Continuing the current trend, Internet traffic is expected to grow significantly over the coming years, with video traffic consuming the biggest share. On the one hand, this growth poses challenges to access providers (APs), who have to upgrade their infrastructure to meet the growing traffic demands as well as find new ways to monetize their network resources. On the other hand, despite numerous optimizations of the underlying transport protocol, a user's utilization of network bandwidth and is thus the user's perceived quality still being largely affected by network latency and buffer size. To address both concerns, we propose DiffPerf, a class-based differentiation framework, that, at a macroscopic level dynamically allocates bandwidth to service classes pre-defined by the APs, and at a microscopic level statistically differentiates and isolates user flows to help them achieve better performance. We implement DiffPerf on OpenDaylight SDN controller and programmable Barefoot Tofino switch and evaluate it from an application perspective for MPEG-DASH video streaming. Our evaluations demonstrate the practicality and flexibility that DiffPerf provides APs with capabilities through which a spectrum of qualities are provisioned at multiple classes. Meanwhile, it assists in achieving better fairness and improving overall user's perceived quality within the same class.

cs.NI↗

arXiv2020

Partially Connected Automated Vehicle Cooperative Control Strategy with a Deep Reinforcement Learning Approach

This paper proposes a cooperative strategy of connected and automated vehicles (CAVs) longitudinal control for partially connected and automated traffic environment based on deep reinforcement learning (DRL) algorithm, which enhances the string stability of mixed traffic, car following efficiency, and energy efficiency. Since the sequences of mixed traffic are combinatory, to reduce the training dimension and alleviate communication burdens, we decomposed mixed traffic into multiple subsystems where each subsystem is comprised of human-driven vehicles (HDV) followed by cooperative CAVs. Based on that, a cooperative CAV control strategy is developed based on a deep reinforcement learning algorithm, enabling CAVs to learn the leading HDV's characteristics and make longitudinal control decisions cooperatively to improve the performance of each subsystem locally and consequently enhance performance for the whole mixed traffic flow. For training, a distributed proximal policy optimization is applied to ensure the training convergence of the proposed DRL. To verify the effectiveness of the proposed method, simulated experiments are conducted, which shows the performance of our proposed model has a great generalization capability of dampening oscillations, fulfilling the car following and energy-saving tasks efficiently under different penetration rates and various leading HDVs behaviors. Keywords: partially connected automated traffic environment, cooperative control, deep reinforcement learning, traffic oscillation dampening, energy efficiency

eess.SY↗

arXiv2020

Dislocation-induced Y segregation at basal-prismatic interfaces in Mg

Solute segregation at twin boundaries in Mg has been widely investigated, yet this phenomenon has not been studied at the equally important basal-prismatic interfaces. To fill this critical gap, this work investigates the segregation behavior of Y at basal-prismatic interfaces with various structures using atomistic simulations. The calculated interfacial energies show that short coherent interfaces and long semi-coherent interfaces containing disconnections and dislocations are more energetically stable than disordered interfaces, which is supported by our experimental observations. The segregation energy of Y at these lowest energy basal-prismatic interfaces shows a clear correlation with the atomic hydrostatic stress, highlighting the importance of local compressive stresses for segregation. In addition, sites around dislocations at the semi-coherent basal-prismatic interfaces demonstrate lower segregation energy, indicating that local defects such as interfacial dislocations can further enhance the segregation. In its entirety, this study indicates that the segregation of solutes can be affected by a number of different aspects of the local structure at complex interfaces in Mg alloys.

cond-mat.mtrl-sci↗

arXiv2020

Zero- to ultralow-field nuclear magnetic resonance and its applications

As a complementary analysis tool to conventional high-field NMR, zero- to ultralow-field (ZULF) NMR detects nuclear magnetization signals in the sub-microtesla regime. Spin-exchange relaxation-free (SERF) atomic magnetometers provide a new generation of sensitive detector for ZULF NMR. Due to the features such as low-cost, high-resolution and potability, ZULF NMR has recently attracted considerable attention in chemistry, biology, medicine, and tests of fundamental physics. This review describes the basic principles, methodology and recent experimental and theoretical development of ZULF NMR, as well as its applications in spectroscopy, quantum control, imaging, NMR-based quantum devices, and tests of fundamental physics. The future prospects of ZULF NMR are also discussed.

quant-ph↗

arXiv2020

Quantum algorithms for hedging and the learning of Ising models

A paradigmatic algorithm for online learning is the Hedge algorithm by Freund and Schapire. An allocation into different strategies is chosen for multiple rounds and each round incurs corresponding losses for each strategy. The algorithm obtains a favorable guarantee for the total losses even in an adversarial situation. This work presents quantum algorithms for such online learning in an oracular setting. For $T$ time steps and $N$ strategies, we exhibit run times of about $O \left ({\rm poly} (T) \sqrt{N} \right)$ for estimating the losses and for betting on individual strategies by sampling. In addition, we discuss a quantum analogue of the Sparsitron, a machine learning algorithm based on the Hedge algorithm. The quantum algorithm inherits the provable learning guarantees from the classical algorithm and exhibits polynomial speedups. The speedups may find relevance in finance, for example for hedging risks, and machine learning, for example for learning generalized linear models or Ising models.

quant-ph↗

arXiv2020

Attention Aware Cost Volume Pyramid Based Multi-view Stereo Network for 3D Reconstruction

We present an efficient multi-view stereo (MVS) network for 3D reconstruction from multiview images. While previous learning based reconstruction approaches performed quite well, most of them estimate depth maps at a fixed resolution using plane sweep volumes with a fixed depth hypothesis at each plane, which requires densely sampled planes for desired accuracy and therefore is difficult to achieve high resolution depth maps. In this paper we introduce a coarseto-fine depth inference strategy to achieve high resolution depth. This strategy estimates the depth map at coarsest level, while the depth maps at finer levels are considered as the upsampled depth map from previous level with pixel-wise depth residual. Thus, we narrow the depth searching range with priori information from previous level and construct new cost volumes from the pixel-wise depth residual to perform depth map refinement. Then the final depth map could be achieved iteratively since all the parameters are shared between different levels. At each level, the self-attention layer is introduced to the feature extraction block for capturing the long range dependencies for depth inference task, and the cost volume is generated using similarity measurement instead of the variance based methods used in previous work. Experiments were conducted on both the DTU benchmark dataset and recently released BlendedMVS dataset. The results demonstrated that our model could outperform most state-of-the-arts (SOTA) methods. The codebase of this project is at https://github.com/ArthasMil/AACVP-MVSNet.

cs.CV↗

arXiv2020

Isotropic Scaling Features Measured Locally in the Solar Wind Turbulence with Stationary Background Field

The scaling anisotropy is crucial to interpret the nonlinear interactions in solar wind turbulence. Previous observations provide diverse results and the structure function analyses are also reported to be an approach to investigate the scaling anisotropy based on a local magnetic field. However, the determination of the sampling angle with respect to the local background magnetic field requires that the observed time series for the average are time stationary. Whether or not this required time stationarity is compatible with the measurements has not been investigated. Here we utilize the second-order structure function method to study the scaling anisotropy with a time-stationary background field.We analyze 88 fast solar wind intervals each with time durations larger than 2 days measured by WIND spacecraft in the period 2005-2018. We calculate the local magnetic field as the average of the time series B whose time stationarity is fulfilled by our criterion phi smaller than 10 deg (phi is the angle between the two averaged magnetic fields after cutting B into two halves). We find for the first time the isotropic scaling feature of the magnetic-trace structure functions with scaling indices -0.63 pm 0.08 and -0.70 pm 0.04, respectively, with the local magnetic field parallel and perpendicular to the solar wind velocity directions. The scaling for the velocity-trace structure functions is also isotropic and the indices are -0.47 pm 0.10 and -0.51 pm 0.09. We also find that with increasing phi threshold to 90 deg, the scaling index of the magnetic-trace structure function in the parallel direction decreases to -0.81, while the rms of the instantaneous angle between magnetic field and solar wind velocity increases up to 45deg at the timescale 150 s, indicating a mix of perpendicular measurements into parallel ones at large scales.

physics.space-ph↗

arXiv2020

Energy Supply for Heating the Slow Solar Wind Observed by Parker Solar Probe between 0.17 and 0.7 au

Energy supply sources for the heating process in the slow solar wind remain unknown. The Parker Solar Probe (PSP) mission provides a good opportunity to study this issue. Recently, PSP observations have found that the slow solar wind experiences stronger heating inside 0.24 au. Here for the first time we measure in the slow solar wind the radial gradient of the low-frequency breaks on the magnetic trace power spectra and evaluate the associated energy supply rate. We find that the energy supply rate is consistent with the observed perpendicular heating rate calculated based on the gradient of the magnetic moment. Based on this finding, one could explain why the slow solar wind is strongly heated inside 0.25 au but expands nearly adiabatically outside 0.25 au. This finding supports the concept that the energy added from the energy-containing range is transferred by an energy cascade process to the dissipation range, and then dissipates to heat the slow solar wind. The related issues for further study are discussed.

physics.space-ph↗

arXiv2020

Dirac neutrino mass models with a modular $S^{}_4$ symmetry

In this paper, we investigate lepton mass spectra, flavor mixing and CP violation with a modular $S^{}_4$ symmetry under the assumption that neutrinos are Dirac fermions. We find that the Majorana mass term can be forbidden by adjusting the weight of the right-handed neutrino superfields. We study the scenarios where modular forms in the neutrino sector take the lowest non-trivial weight two, while those in the charged-lepton sector vary from two to six. The corrections from renormalization-group running effects to our model have also been discussed in detail. We totally obtain twelve different classes of models and find that ten of them can accommodate current neutrino oscillation data.

hep-ph↗

arXiv2020

Community Detection through Vector-label Propagation Algorithms

Community detection is a fundamental and important problem in network science, as community structures often reveal both topological and functional relationships between different components of the complex system. In this paper, we first propose a gradient descent framework of modularity optimization called vector-label propagation algorithm (VLPA), where a node is associated with a vector of continuous community labels instead of one label. Retaining weak structural information in vector-label, VLPA outperforms some well-known community detection methods, and particularly improves the performance in networks with weak community structures. Further, we incorporate stochastic gradient strategies into VLPA to avoid stuck in the local optima, leading to the stochastic vector-label propagation algorithm (sVLPA). We show that sVLPA performs better than Louvain Method, a widely used community detection algorithm, on both artificial benchmarks and real-world networks. Our theoretical scheme based on vector-label propagation can be directly applied to high-dimensional networks where each node has multiple features, and can also be used for optimizing other partition measures such as modularity with resolution parameters.

physics.soc-ph↗