arXiv subjects

Yang Wang

Publications and source records attributed to Yang Wang.

At least 919 records · Page 51Linked to original sources

arXiv2012

Near-infrared interferometric observation of the Herbig Ae star HD144432 with VLTI/AMBER

We study the sub-AU-scale circumstellar environment of the Herbig Ae star HD144432 with near-infrared (NIR) VLTI/AMBER observations to investigate the structure of its inner dust disk. The interferometric observations were carried out with the AMBER instrument in the H and K band. We interpret the measured H- and K-band visibilities, the near- and mid-infrared visibilities from the literature, and the SED of HD144432 by using geometric ring models and ring-shaped temperature-gradient disk models with power-law temperature distributions. We derived a K-band ring-fit radius of 0.17 \pm 0.01 AU and an H-band radius of 0.18 \pm 0.01 AU (for a distance of 145 pc). This measured K-band radius of \sim0.17 AU lies in the range between the dust sublimation radius of \sim0.13 AU (predicted for a dust sublimation temperature of 1500 K and gray dust) and the prediction of models including backwarming (\sim0.27 AU). We found that an additional extended halo component is required in both the geometric and temperature-gradient modeling. In the best temperature- gradient model, the disk consists of two components. The inner part of the disk is a thin ring with an inner radius of \sim0.21 AU, a temperature of \sim1600 K, and a ring thickness \sim0.02 AU. The outer part extends from \sim1 AU to \sim10 AU with an inner temperature of \sim400 K. We find that the disk is nearly face-on with an inclination angle of < 28 degree. Our temperature-gradient modeling suggests that the NIR excess is dominated by emission from a narrow, bright rim located at the dust sublimation radius, while an extended halo component contributes \sim6% to the total flux at 2 μm. The MIR model emission has a two-component structure with \sim20% flux from the inner ring and the rest from the outer part. This two-component structure suggests a disk gap, which is possibly caused by the shadow of a puffed-up inner rim.

astro-ph.SR↗

arXiv2012

An ADMM Algorithm for a Class of Total Variation Regularized Estimation Problems

We present an alternating augmented Lagrangian method for convex optimization problems where the cost function is the sum of two terms, one that is separable in the variable blocks, and a second that is separable in the difference between consecutive variable blocks. Examples of such problems include Fused Lasso estimation, total variation denoising, and multi-period portfolio optimization with transaction costs. In each iteration of our method, the first step involves separately optimizing over each variable block, which can be carried out in parallel. The second step is not separable in the variables, but can be carried out very efficiently. We apply the algorithm to segmentation of data based on changes inmean (l_1 mean filtering) or changes in variance (l_1 variance filtering). In a numerical example, we show that our implementation is around 10000 times faster compared with the generic optimization solver SDPT3.

stat.ML↗

arXiv2012

Oxygen-vacancy-related relaxation and scaling behaviors of Bi0.9La0.1Fe0.98Mg0.02O3 (La,Mg-codoped BiFeO3) ferroelectric thin film

Oxygen-vacancies-related dielectric relaxation and scaling behaviors of Bi0.9La0.1Fe0.98Mg0.02O3 (BLFM) thin film have been investigated by temperature-dependent impedance spectroscopy from 40 oC up to 200 oC. We found that hopping electrons and single-charged oxygen vacancies (VO.) coexist in the BLFM thin film and make contribution to dielectric response of grain and grain boundary respectively. The activation energy for VO. is shown to be 0.94 eV in the whole temperature range investigated, whereas the distinct activation energies for electrons are 0.136 eV below 110oC and 0.239 eV above 110oC in association with hopping along the Fe2+- VO.-Fe3+ chain and hopping between Fe2+-Fe3+, respectively, indicating different hopping processes for electrons. Moreover, it has been found that hopping electrons is in form of long rang movement, while localized and long range movement of oxygen vacancies coexist in BLFM film. The Cole-Cole plots in modulus formalism show a poly-dispersive nature of relaxation for oxygen vacancies and a unique relaxation time for hopping electrons. The scaling behavior of modulus spectra further suggests that the distribution of relaxation times for oxygen vacancies is temperature independent.

cond-mat.mtrl-sci↗

arXiv2012

3D Projection Sideband Cooling

We demonstrate 3D microwave projection sideband cooling of trapped, neutral atoms. The technique employs state-dependent potentials that enable microwave photons to drive vibration-number reducing transitions. The particular cooling sequence we employ uses minimal spontaneous emission, and works even for relatively weakly bound atoms. We cool 76% of atoms to their 3D vibrational ground states in a site-resolvable 3D optical lattice.

cond-mat.quant-gas↗

arXiv2012

Spectral Tetris Fusion Frame Constructions

Spectral tetris is a fexible and elementary method to construct unit norm frames with a given frame operator, having all of its eigenvalues greater than or equal to two. One important application of spectral tetris is the construction of fusion frames. We first show how the assumption on the spectrum of the frame operator can be dropped and extend the spectral tetris algorithm to construct unit norm frames with any given spectrum of the frame operator. We then provide a suffcient condition for using this generalization of spectral tetris to construct fusion frames with prescribed spectrum for the fusion frame operator and with prescribed dimensions for the subspaces. This condition is shown to be necessary in the tight case of redundancy greater than two.

math.NA↗

arXiv2011

Efficiency at maximum power output of linear irreversible Carnot-like heat engines

The efficiency at maximum power output of linear irreversible Carnot-like heat engines is investigated based on the assumption that the rate of irreversible entropy production of working substance in each "isothermal" process is a quadratic form of heat exchange rate between the working substance and the reservoir. It is found that the maximum power output corresponds to minimizing the irreversible entropy production in two "isothermal" processes of the Carnot-like cycle, and that the efficiency at maximum power output has the form as $η_{mP}={η_C}/(2-γη_C)$ where $η_C$ is the Carnot efficiency while $γ$ depends on the heat transfer coefficients between the working substance and two reservoirs. The value of $η_{mP}$ is bounded between $η_{-}\equiv η_C/2$ and $η_{+}\equivη_C/(2-η_C)$. These results are consistent with those obtained by Chen and Yan [J. Chem. Phys. \textbf{90}, 3740 (1989)] based on the endoreversible assumption, those obtained by Esposito \textit{et al.} [Phys. Rev. Lett. \textbf{105}, 150603 (2010)] based on the low-dissipation assumption, and those obtained by Schmiedl and Seifert [EPL \textbf{81}, 20003 (2008)] for stochastic heat engines which in fact also satisfy the low-dissipation assumption. Additionally, we find that the endoreversible assumption happens to hold for Carnot-like heat engines operating at the maximum power output based on our fundamental assumption, and that the Carnot-like heat engines that we focused does not strictly satisfy the low-dissipation assumption, which implies that the low-dissipation assumption or our fundamental assumption is a sufficient but non-necessary condition for the validity of $η_{mP}={η_C}/(2-γη_C)$ as well as the existence of two bounds $η_{-}\equiv η_C/2$ and $η_{+}\equivη_C/(2-η_C)$.

cond-mat.stat-mech↗

arXiv2011

Evidence of Photocatalytic Dissociation of Water on TiO2 with Atomic Resolution

Photocatalytic water splitting reaction on TiO2 surface is one of the fundamental issues that bears significant implication in hydrogen energy technology and has been extensively studied. However, the existence of the very first reaction step, the direct photo-dissociation of water, has been disregarded. Here, we provide unambiguously experimental evidence to demonstrate that adsorbed water molecules on reduced rutile TiO2(110)-1\times1 surface can be dissociated under UV irradiation using low temperature scanning tunneling microscopy. It is identified that a water molecule at fivefold coordinated Ti (Ti5c) site can be photocatalytically dissociated, resulting in a hydroxyl at Ti5c and another hydroxyl at bridge oxygen row. Our findings reveal a missing link in the photocatalytic water splitting reaction chain, which greatly contribute to the detailed understanding of underlying mechanism.

physics.chem-ph↗

arXiv2011

Femtosecond Laser-induced Crystallization of Amorphous Sb2Te3 film and Coherent Phonon Spectroscopy Characterization and Optical Injection of Electron Spins

A femtosecond laser-irradiated crystallizing technique is tried to convert amorphous Sb2Te3 film into crystalline film. Sensitive coherent phonon spectroscopy (CPS) is used to monitor the crystallization of amorphous Sb2Te3 film at the original irradiation site. The CPS reveals that the vibration strength of two phonon modes that correspond to the characteristic phonon modes of crystalline Sb2Te3, enhances with increasing laser irradiation fluence (LIF), showing the rise of the degree of crystallization with LIF and that femtosecond laser irradiation is a good post-treatment technique. Time-resolved circularly polarized pump-probe spectroscopy is used to investigate electron spin relaxation dynamics of the laser-induced crystallized Sb2Te3 film. Spin relaxation process indeed is observed, confirming the theoretical predictions on the validity of spin-dependent optical transition selection rule and the feasibility of transient spin-grating-based optical detection scheme of spin-plasmon collective modes in Sb2Te3-like topological insulators.

cond-mat.str-el↗

arXiv2011

The Regularity of Refinable Functions

The regularity of refinable functions has been studied extensively in the past. A classical result by Daubechies and Lagarias states that a compactly supported refinable function in $\R$ of finite mask with integer dilation and translations cannot be in $C^\infty$. A bound on the regularity based on the eigenvalues of certain matrices associated with the refinement equation is also given. Surprisingly this fundamental classical result has not been proved in the more general settings, such as in higher dimensions or when the dilation is not an integer. In this paper we extend this classical result to the most general setting for arbitrary dimension, dilation and translations.

math.FA↗

arXiv2011

Fabrication of surface-patterned ZnO thin films using sol-gel methods and nanoimprint lithography

Surface-patterned ZnO thin films were fabricated by direct imprinting on ZnO sol and subsequent annealing process. The polymer-based ZnO sols were deposited on various substrates for the nanoimprint lithography and converted to surface-patterned ZnO gel films during the thermal curing nanoimprint process. Finally, crystalline ZnO films were obtained by subsequent annealing of the patterned ZnO gel films. The optical characterization indicates that the surface patterning of ZnO thin films can lead to an enhanced transmittance. Large-scale ZnO thin films with different patterns can be fabricated by various easy-made ordered templates using this combination of sol-gel and nanoimprint lithography techniques.

cond-mat.mtrl-sci↗

arXiv2011

The Entrainment-Limited Evolution of FR II Sources: Maximum Sizes and A Possible Connection to FR Is

We construct a simple theoretical model to investigate how entrainment gradually erodes high-speed FR II jets. This process is described by embedding a mixing-layer model developed originally to describe FR I objects in a self-similar model for the lobe structure of classical FR II sources. Following the classical FR II models, we assume that the lobe is dominated by the particles injected from the central jet. The entrainment produces a boundary shear layer which acts at the interface between the dense central jet and the less denser surrounding lobe, and the associated erosion of the jet places interesting limits on the maximum size of FR II sources. The model shows that this limit depends mainly on the initial bulk velocity of the relativistic jet triggered. The bulk velocities of FR IIs suggested by our model are in good agreement with that obtained from direct pc-scale observations on ordinary radio galaxies and quasars. Finally, we discuss how FR IIs may evolve into FR Is upon reaching their maximum, entrainment-limited sizes.

astro-ph.CO↗

arXiv2011

Detecting Important Nodes to Community Structure Using the Spectrum of the Graph

Many complex systems can be represented as networks, and how a network breaks up into subnetworks or communities is of wide interest. However, the development of a method to detect nodes important to communities that is both fast and accurate is a very challenging and open problem. In this manuscript, we introduce a new approach to characterize the node importance to communities. First, a centrality metric is proposed to measure the importance of network nodes to community structure using the spectrum of the adjacency matrix. We define the node importance to communities as the relative change in the eigenvalues of the network adjacency matrix upon their removal. Second, we also propose an index to distinguish two kinds of important nodes in communities, i.e., "community core" and "bridge". Our indices are only relied on the spectrum of the graph matrix. They are applied in many artificial networks as well as many real-world networks. This new methodology gives us a basic approach to solve this challenging problem and provides a realistic result.

physics.soc-ph↗

arXiv2011

Fabrication of hydrophobic inorganic coatings on natural lotus leaves for nanoimprint stamps

Hydrophobic inorganic films were obtained by direct deposition of copper or silicon onto natural lotus leaves by ion beam sputtering deposition technique. Scanning electron microscopy observations showed a lotus-leaf-like surface structure of the deposited inorganic films. Hydrophobic nature of the inorganic films on lotus leaves had been improved compared to the inorganic films deposited on flat silicon substrates. Water contact angles measured on the lotus-leaf-like copper and silicon films were 136.3 \pm 8° and 117.8 \pm 4.4°, respectively. The hydrophobic lotus-leaf-like inorganic films had been repeated used as nanoimprint stamps. Negative structures of lotus-leaf-like inorganic films were obtained on the polystyrene resist layers.

cond-mat.mtrl-sci↗

arXiv2011

The Performance of PCM Quantization Under Tight Frame Representations

In this paper, we study the performance of the PCM scheme with linear quantization rule for quantizing finite unit-norm tight frame expansions for $\R^d$ and derive the PCM quantization error without the White Noise Hypothesis. We prove that for the class of unit norm tight frames derived from uniform frame paths the quantization error has an upper bound of $O(δ^{3/2})$ regardless of the frame redundancy. This is achieved using some of the techniques developed by Güntürk in his study of Sigma-Delta quantization. Using tools of harmonic analysis we show that this upper bound is sharp for $d=2$. A consequence of this result is that, unlike with Sigma-Delta quantization, the error for PCM quantization in general does not diminish to zero as one increases the frame redundancy. We extend the result to high dimension and show that the PCM quantization error has an upper bound $O(δ^{(d+1)/2})$ for asymptopitcally equidistributed unit-norm tight frame of $\R^{d}$.

math.NA↗

arXiv2011

A Matrix-Analytic Solution for Randomized Load Balancing Models with Phase-Type Service Times

In this paper, we provide a matrix-analytic solution for randomized load balancing models (also known as \emph{supermarket models}) with phase-type (PH) service times. Generalizing the service times to the phase-type distribution makes the analysis of the supermarket models more difficult and challenging than that of the exponential service time case which has been extensively discussed in the literature. We first describe the supermarket model as a system of differential vector equations, and provide a doubly exponential solution to the fixed point of the system of differential vector equations. Then we analyze the exponential convergence of the current location of the supermarket model to its fixed point. Finally, we present numerical examples to illustrate our approach and show its effectiveness in analyzing the randomized load balancing schemes with non-exponential service requirements.

cs.NI↗

arXiv2010

Enhanced diffusion due to active swimmers at a solid surface

We consider two systems of active swimmers moving close to a solid surface, one being a living population of wild-type \textit{E. coli} and the other being an assembly of self-propelled Au-Pt rods. In both situations, we have identified two different types of motion at the surface and evaluated the fraction of the population that displayed ballistic trajectories (active swimmers) with respect to those showing random-like behavior. We studied the effect of this complex swimming activity on the diffusivity of passive tracers also present at the surface. We found that the tracer diffusivity is enhanced with respect to standard Brownian motion and increases linearly with the activity of the fluid, defined as the product of the fraction of active swimmers and their mean velocity. This result can be understood in terms of series of elementary encounters between the active swimmers and the tracers.

physics.bio-ph↗

arXiv2010

Detecting Image Forgeries using Geometric Cues

This chapter presents a framework for detecting fake regions by using various methods including watermarking technique and blind approaches. In particular, we describe current categories on blind approaches which can be divided into five: pixel-based techniques, format-based techniques, camera-based techniques, physically-based techniques and geometric-based techniques. Then we take a second look on the geometric-based techniques and further categorize them in detail. In the following section, the state-of-the-art methods involved in the geometric technique are elaborated.

cs.CV↗

arXiv2010

Element Retrieval using Namespace Based on keyword search over XML Documents

Querying over XML elements using keyword search is steadily gaining popularity. The traditional similarity measure is widely employed in order to effectively retrieve various XML documents. A number of authors have already proposed different similarity-measure methods that take advantage of the structure and content of XML documents. They do not, however, consider the similarity between latent semantic information of element texts and that of keywords in a query. Although many algorithms on XML element search are available, some of them have the high computational complexity due to searching a huge number of elements. In this paper, we propose a new algorithm that makes use of the semantic similarity between elements instead of between entire XML documents, considering not only the structure and content of an XML document, but also semantic information of namespaces in elements. We compare our algorithm with the three other algorithms by testing on the real datasets. The experiments have demonstrated that our proposed method is able to improve the query accuracy, as well as to reduce the running time.

cs.IR↗