Low Latency CMOS Hardware Acceleration for Fully Connected Layers in Deep Neural Networks

Nick Iliev; Amit Ranjan Trivedi

Home/Archive/arXiv

arXiv · 2011.12839

Low Latency CMOS Hardware Acceleration for Fully Connected Layers in Deep Neural Networks

Nick Iliev·Amit Ranjan Trivedi

View original source ↗Read source document ↗Export metadata ↓

Abstract

We present a novel low latency CMOS hardware accelerator for fully connected (FC) layers in deep neural networks (DNNs). The FC accelerator, FC-ACCL, is based on 128 8x8 or 16x16 processing elements (PEs) for matrix-vector multiplication, and 128 multiply-accumulate (MAC) units integrated with 128 High Bandwidth Memory (HBM) units for storing the pretrained weights. Micro-architectural details for CMOS ASIC implementations are presented and simulated performance is compared to recent hardware accelerators for DNNs for AlexNet and VGG 16. When comparing simulated processing latency for a 4096-1000 FC8 layer, our FC-ACCL is able to achieve 48.4 GOPS (with a 100 MHz clock) which improves on a recent FC8 layer accelerator quoted at 28.8 GOPS with a 150 MHz clock. We have achieved this considerable improvement by fully utilizing the HBM units for storing and reading out column-specific FClayer weights in 1 cycle with a novel colum-row-column schedule, and implementing a maximally parallel datapath for processing these weights with the corresponding MAC and PE units. When up-scaled to 128 16x16 PEs, for 16x16 tiles of weights, the design can reduce latency for the large FC6 layer by 60 % in AlexNet and by 3 % in VGG16 when compared to an alternative EIE solution which uses compression.

Explore related subjects

cs.AR cs.NE eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Nick Iliev, Amit Ranjan Trivedi. 2020-11-25. Low Latency CMOS Hardware Acceleration for Fully Connected Layers in Deep Neural Networks. https://arxiv.org/abs/2011.12839

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A System Architecture for Low Latency Multiprogramming Quantum Computing

As quantum systems scale, multiprogramming quantum computing (MPQC) provides a practical way to improve device utilization and throughput. However, because quantum executables are device-dependent, non-portable across qubit regions, and highly susceptible to noise and crosstalk, current MPQC pipelines rely on expensive online compilation to co-optimize concurrently running programs. This online step dominates runtime and impedes low-latency deployments for practical, real-world workloads in the future, such as repeatedly invoked quantum neural network (QNN) services. We present FLAMENCO, a fidelity-aware multi-version compilation system that enables independent offline compilation and low-latency multiprogramming at runtime. \textbf{At the architecture level}, the system abstracts devices into compute units to reduce the search space of region allocation. \textbf{At compile time}, it generates diverse executable versions for each program---each bound to a distinct qubit region---allowing dynamic region selection at runtime and overcoming non-portability. \textbf{At runtime}, it employs a lightweight orchestrator that uses post-compilation fidelity metrics to avoid conflicts and mitigate crosstalk, supporting conflict-free co-execution without online co-optimization. Evaluations show that FLAMENCO achieves over 5$\times$ runtime speedup in post-scheduling execution while maintaining comparable execution fidelity on common-success workloads. When integrated into existing scheduler-coupled systems, it raises workload-level conflict-free orchestration ratio from 0.183 to 1.000 for HyperQ and from 0.050 to 0.400 for QOS.

cs.AR↗

arXiv2026

HBFSim: Fast and Faithful Simulation of High-Bandwidth Flash Under Real GPU Execution

High-Bandwidth Flash (HBF) places high-capacity NAND beside HBM to relieve the memory-capacity bottleneck of LLM inference, yet its system-level behavior cannot be evaluated before hardware becomes available. Cycle-level GPU simulators are too slow for production-scale models. Trace replay has a further shortcoming: it cannot capture the allocation, migration, and execution changes induced by different HBM-HBF configurations. Our key insight is that HBF need not be evaluated by simulating the GPU: only the program-visible effects of HBF need to be modeled. And only a real LLM workload running on real hardware can answer the arguments about HBF. Hence the modeled service has to be injected into that running program, and the injection must not destroy the GPU concurrency that would hide the original I/O latency. We present HBFSim, an open-source HBF simulator that executes LLM workloads on a real GPU while modeling HBF timing, thermal, and other behaviors online. HBFSim rewrites the PTX of the workload's kernels and routes accesses inside a registered address range into the HBF simulator. It supports asynchronous TMA transfers and capacities beyond physical GPU memory. HBFSim leaves the model's run unaffected across ordinary-memory, TMA, and capacity-mode tests. The delay it injects matches the delay requested to within 0.152%. We also design a coupled thermal module that puts HBF, HBM, and the GPU in one advanced package, which is important for answering how severe the hot throttling problem becomes after HBF runs for a long time. Experiments with Qwen3-30B show how package heating, HBM-HBF allocation, and shared MoE demand jointly constrain the design space of future HBF accelerators.

cs.AR↗

arXiv2026

Bio-inspired Learning and Decision-Making with Probabilistic In-Memory Computing Hardware: Part 2

This report extends our previous work (Part 1), which introduced an energy-based model for learning and decision-making under uncertainty. The model leverages stochastic Langevin dynamics to continuously evolve approximate probability distributions over neuron states and model weights. However, as noted in Part 1 and confirmed through GPU-based implementations, large-scale probabilistic energy-based models of this nature face significant scalability challenges due to excessive execution latency. This latency stems from a fundamental mismatch: massively parallel models with low arithmetic intensity (such as energy-based models) are being executed on processor architectures like GPUs that rely on high-bandwidth memory (HBM) interfaces. The HBM imposes brutally sequential execution constraints on inherently parallelizable models, creating the false impression that such models are unscalable. In reality, it is the GPU architecture itself, with its dependence on HBM interfaces, that is not a scalable processor architecture for this class of AI model. In this report, we demonstrate using a detailed transaction-level model (TLM) of a probabilistic analogue in-memory computing (AIMC) processor that the same energy-based model can execute well over 1000x faster than data-center-grade hardware by eliminating the HBM interface and performing computation directly within on-chip memory.

cs.AR↗