Search arXiv⌕ Search

arXiv subjects

Robotics

Explore arXiv robotics papers and cs.RO metadata. Search for robot learning, motion planning and control, then check experiments in the source manuscript.

At least 973 records · Page 54Linked to original sources

Resilient Monitoring in Heterogeneous Multi-robot Systems through Network Reconfiguration

We propose a framework for resilience in a networked heterogeneous multi-robot team subject to resource failures. Each robot in the team is equipped with resources that it shares with its neighbors. Additionally, each robot in the team executes a task, whose performance depends on the resources to which it has access. When a resource on a particular robot becomes unavailable (\eg a camera ceases to function), the team optimally reconfigures its communication network so that the robots affected by the failure can continue their tasks. We focus on a monitoring task, where robots individually estimate the state of an exogenous process. We encode the end-to-end effect of a robot's resource loss on the monitoring performance of the team by defining a new stronger notion of observability -- \textit{one-hop observability}. By abstracting the impact that {low-level} individual resources have on the task performance through the notion of one-hop observability, our framework leads to the principled reconfiguration of information flow in the team to effectively replace the lost resource on one robot with information from another, as long as certain conditions are met. Network reconfiguration is converted to the problem of selecting edges to be modified in the system's communication graph after a resource failure has occurred. A controller based on finite-time convergence control barrier functions drives each robot to a spatial location that enables the communication links of the modified graph. We validate the effectiveness of our framework by deploying it on a team of differential-drive robots estimating the position of a group of quadrotors.

cs.RO↗

Supporting Robotic Software Migration Using Static Analysis and Model-Driven Engineering

The wide use of robotic systems contributed to developing robotic software highly coupled to the hardware platform running the robotic system. Due to increased maintenance cost or changing business priorities, the robotic hardware is infrequently upgraded, thus increasing the risk for technology stagnation. Reducing this risk entails migrating the system and its software to a new hardware platform. Conventional software engineering practices such as complete re-development and code-based migration, albeit useful in mitigating these obsolescence issues, they are time-consuming and overly expensive. Our RoboSMi model-driven approach supports the migration of the software controlling a robotic system between hardware platforms. First, RoboSMi executes static analysis on the robotic software of the source hardware platform to identify platform-dependent and platform-agnostic software constructs. By analysing a model that expresses the architecture of robotic components on the target platform, RoboSMi establishes the hardware configuration of those components and suggests software libraries for each component whose execution will enable the robotic software to control the components. Finally, RoboSMi through code-generation produces software for the target platform and indicates areas that require manual intervention by robotic engineers to complete the migration. We evaluate the applicability of RoboSMi and analyse the level of automation and performance provided from its use by migrating two robotic systems deployed for an environmental monitoring and a line following mission from a Propeller Activity Board to an Arduino Uno.

cs.SE↗

Dissecting liabilities in adversarial surgical robot failures: A national (Danish) and European law perspective

Over the last decade, surgical robots have risen in prominence and usage. For surgical robots, connectivity is necessary to accept software updates, accept instructions, and transfer sensory data, but it also exposes the robot to cyberattacks, which can damage the patient or the surgeon. These injuries are normally caused by safety failures, as seen in accidents with industrial robots, but cyberattacks are caused by security failures instead. We create a taxonomy for both types of failures in this paper specifically for surgical robots. These robots are increasingly sold and used in the European Union (EU); we therefore consider how surgical robots are viewed and treated by EU law. Specifically, which rights regulators and manufacturers have, and which legal remedies and actions a patient or manufacturer would have in a single national legal system in the union, if injuries were to occur from a security failure caused by an adversary that cannot be unambiguously identified. We find that the selected national legal system can adequately deal with attacks on surgical robots, because it can on one hand efficiently compensate the patient. This is because of its flexibility; secondly, a remarkable absence of distinction between safety vs security causes of failure and focusing instead on the detrimental effects, thus benefiting the patient; and third, liability can be removed from the manufacturer by withdrawing its status as party if the patient chooses a separate public law measure to recover damages. Furthermore, we find that current EU law does consider both security and safety aspects of surgical robots, without it mentioning it through literal wording, but it also adds substantial liabilities and responsibilities to the manufacturers of surgical robots, gives the patient special rights and confers immense powers on the regulators.

cs.CY↗

Efficient Multi-Robot Exploration with Energy Constraint based on Optimal Transport Theory

This paper addresses an Optimal Transport (OT)-based efficient multi-robot exploration problem, considering the energy constraints of a multi-robot system. The efficiency in this problem implies how a team of robots (agents) covers a given domain, reflecting a priority of areas of interest represented by a density distribution, rather than simply following a preset of uniform patterns. To achieve an efficient multi-robot exploration, the optimal transport theory that quantifies a distance between two density distributions is employed as a tool, which also serves as a means of performance measure. The energy constraints for the multi-robot system is then incorporated into the OT-based multi-robot exploration scheme. The proposed scheme is decoupled from robot dynamics, broadening the applicability of the multi-robot exploration plan to heterogeneous robot platforms. Not only the centralized but also decentralized algorithms are provided to cope with more realistic scenarios such as communication range limits between agents. To measure the exploration efficiency, the upper bound of the performance is developed for both the centralized and decentralized cases based on the optimal transport theory, which is computationally tractable as well as efficient. The proposed multi-robot exploration scheme is also applicable to a time-varying distribution, where the spatio-temporal evolution of the given reference distribution is desired. To validate the proposed method, multiple simulation results are provided.

eess.SY↗

Animated Cassie: A Dynamic Relatable Robotic Character

Creating robots with emotional personalities will transform the usability of robots in the real world. As previous emotive social robots are mostly based on statically stable robots whose mobility is limited, this paper develops an animation to real world pipeline that enables dynamic bipedal robots that can twist, wiggle, and walk to behave with emotions. First, an animation method is introduced to design emotive motions for the virtual robot character. Second, a dynamics optimizer is used to convert the animated motion to dynamically feasible motion. Third, real time standing and walking controllers and an automaton are developed to bring the virtual character to life. This framework is deployed on a bipedal robot Cassie and validated in experiments. To the best of our knowledge, this paper is one of the first to present an animatronic dynamic legged robot that is able to perform motions with desired emotional attributes. We term robots that use dynamic motions to convey emotions as Dynamic Relatable Robotic Characters.

cs.RO↗

Emotional Musical Prosody for the Enhancement of Trust in Robotic Arm Communication

As robotic arms become prevalent in industry it is crucial to improve levels of trust from human collaborators. Low levels of trust in human-robot interaction can reduce overall performance and prevent full robot utilization. We investigated the potential benefits of using emotional musical prosody to allow the robot to respond emotionally to the user's actions. We tested participants' responses to interacting with a virtual robot arm that acted as a decision agent, helping participants select the next number in a sequence. We compared results from three versions of the application in a between-group experiment, where the robot had different emotional reactions to the user's input depending on whether the user agreed with the robot and whether the user's choice was correct. In all versions, the robot reacted with emotional gestures. One version used prosody-based emotional audio phrases selected from our dataset of singer improvisations, the second version used audio consisting of a single pitch randomly assigned to each emotion, and the final version used no audio, only gestures. Our results showed no significant difference for the percentage of times users from each group agreed with the robot, and no difference between user's agreement with the robot after it made a mistake. However, participants also took a trust survey following the interaction, and we found that the reported trust ratings of the musical prosody group were significantly higher than both the single-pitch and no audio groups.

cs.RO↗

Towards open and expandable cognitive AI architectures for large-scale multi-agent human-robot collaborative learning

Learning from Demonstration (LfD) constitutes one of the most robust methodologies for constructing efficient cognitive robotic systems. Despite the large body of research works already reported, current key technological challenges include those of multi-agent learning and long-term autonomy. Towards this direction, a novel cognitive architecture for multi-agent LfD robotic learning is introduced, targeting to enable the reliable deployment of open, scalable and expandable robotic systems in large-scale and complex environments. In particular, the designed architecture capitalizes on the recent advances in the Artificial Intelligence (AI) field, by establishing a Federated Learning (FL)-based framework for incarnating a multi-human multi-robot collaborative learning environment. The fundamental conceptualization relies on employing multiple AI-empowered cognitive processes (implementing various robotic tasks) that operate at the edge nodes of a network of robotic platforms, while global AI models (underpinning the aforementioned robotic tasks) are collectively created and shared among the network, by elegantly combining information from a large number of human-robot interaction instances. Regarding pivotal novelties, the designed cognitive architecture a) introduces a new FL-based formalism that extends the conventional LfD learning paradigm to support large-scale multi-agent operational settings, b) elaborates previous FL-based self-learning robotic schemes so as to incorporate the human in the learning loop and c) consolidates the fundamental principles of FL with additional sophisticated AI-enabled learning methodologies for modelling the multi-level inter-dependencies among the robotic tasks. The applicability of the proposed framework is explained using an example of a real-world industrial case study for agile production-based Critical Raw Materials (CRM) recovery.

cs.RO↗

Object Detection and Pose Estimation from RGB and Depth Data for Real-time, Adaptive Robotic Grasping

In recent times, object detection and pose estimation have gained significant attention in the context of robotic vision applications. Both the identification of objects of interest as well as the estimation of their pose remain important capabilities in order for robots to provide effective assistance for numerous robotic applications ranging from household tasks to industrial manipulation. This problem is particularly challenging because of the heterogeneity of objects having different and potentially complex shapes, and the difficulties arising due to background clutter and partial occlusions between objects. As the main contribution of this work, we propose a system that performs real-time object detection and pose estimation, for the purpose of dynamic robot grasping. The robot has been pre-trained to perform a small set of canonical grasps from a few fixed poses for each object. When presented with an unknown object in an arbitrary pose, the proposed approach allows the robot to detect the object identity and its actual pose, and then adapt a canonical grasp in order to be used with the new pose. For training, the system defines a canonical grasp by capturing the relative pose of an object with respect to the gripper attached to the robot's wrist. During testing, once a new pose is detected, a canonical grasp for the object is identified and then dynamically adapted by adjusting the robot arm's joint angles, so that the gripper can grasp the object in its new pose. We conducted experiments using a humanoid PR2 robot and showed that the proposed framework can detect well-textured objects, and provide accurate pose estimation in the presence of tolerable amounts of out-of-plane rotation. The performance is also illustrated by the robot successfully grasping objects from a wide range of arbitrary poses.

cs.RO↗

Impact of Explanation on Trust of a Novel Mobile Robot

One challenge with introducing robots into novel environments is misalignment between supervisor expectations and reality, which can greatly affect a user's trust and continued use of the robot. We performed an experiment to test whether the presence of an explanation of expected robot behavior affected a supervisor's trust in an autonomous robot. We measured trust both subjectively through surveys and objectively through a dual-task experiment design to capture supervisors' neglect tolerance (i.e., their willingness to perform their own task while the robot is acting autonomously). Our objective results show that explanations can help counteract the novelty effect of seeing a new robot perform in an unknown environment. Participants who received an explanation of the robot's behavior were more likely to focus on their own task at the risk of neglecting their robot supervision task during the first trials of the robot's behavior compared to those who did not receive an explanation. However, this effect diminished after seeing multiple trials, and participants who received explanations were equally trusting of the robot's behavior as those who did not receive explanations. Interestingly, participants were not able to identify their own changes in trust through their survey responses, demonstrating that the dual-task design measured subtler changes in a supervisor's trust.

cs.RO↗

Android Controlled Mobile Robot Design with IP Camera

In this study Arduino card based mobile robot design was realized. This robot can serve as a security robot, an auxiliary robot or a control robot. The designed robot has two operation modes. The first operating mode is autonomous mode. In this mode, the robot detects the surroundings with the help of ultrasonic sensors placed around it, and keeps track of the places it passes by using the encoder. It is able to navigate without hitting any place and passing from where it passes, and it transmits the patient's pulse and temperature condition to the user by other systems installed on it. Also the IP camera sends the scene on the screen. The emergency button to be placed next to the patient sends information to the user in emergency situations. If the abnormality is detected in the temperature and pulse again, the user gives a message. When the pre-recorded drug use times come, the system can alert the patient. The second mode is manual mode. In this mode, the user can move the desired direction of the robot with the Android operating system. In addition, all data received in autonomous mode can be sent to the user. Thus, the user can control the mobile robot with the camera image even if it is not in the vicinity of the robot.

cs.RO↗

Haptic-enabled Mixed Reality System for Mixed-initiative Remote Robot Control

Robots assist in many areas that are considered unsafe for humans to operate. For instance, in handling pandemic diseases such as the recent Covid-19 outbreak and other outbreaks like Ebola, robots can assist in reaching areas dangerous for humans and do simple tasks such as pick up the correct medicine (among a set of bottles prescribed) and deliver to patients. In such cases, it might not be good to rely on the fully autonomous operation of robots. Since many mobile robots are fully functional with low-level tasks such as grabbing and moving, we consider the mixed-initiative control where the user can guide the robot remotely to finish such tasks. For this mixed-initiative control, the user controlling the robot needs to visualize a 3D scene as seen by the robot and guide it. Mixed reality can virtualize reality and immerse users in the 3D scene that is reconstructed from the real-world environment. This technique provides the user more freedom such as choosing viewpoints at view time. In recent years, benefiting from the high-quality data from Light Detection and Ranging (LIDAR) and RGBD cameras, mixed reality is widely used to build networked platforms to improve the performance of robot teleoperations and robot-human collaboration, and enhanced feedback for mixed-initiative control. In this paper, we proposed a novel haptic-enabled mixed reality system, that provides haptic interfaces to interact with the virtualized environments and give remote guidance for mobile robots towards high-level tasks. The experimental results show the effectiveness and flexibility of the proposed haptic enabled mixed reality system.

cs.RO↗

Mobile Recharger Path Planning and Recharge Scheduling in a Multi-Robot Environment

In many multi-robot applications, mobile worker robots are often engaged in performing some tasks repetitively by following pre-computed trajectories. As these robots are battery-powered, they need to get recharged at regular intervals. We envision that in the future, a few mobile recharger robots will be employed to supply charge to the energy-deficient worker robots recurrently, to keep the overall efficiency of the system optimized.In this setup, we need to find the time instants and locations for the meeting of the worker robots and recharger robots optimally. We present a Satisfiability Modulo Theory (SMT)-based approach that captures the activities of the robots in the form of constraints in a sufficiently long finite-length time window (hypercycle) whose repetitions provide their perpetual behavior. Our SMT encoding ensures that for a chosen length of the hypercycle, the total waiting time of the worker robots due to charge constraints is minimized under certain condition, and close to optimal when the condition does not hold. Moreover, the recharger robots follow the most energy-efficient trajectories. We show the efficacy of our approach by comparing it with another variant of the SMT-based method which is not scalable but provides an optimal solution globally, and with a greedy algorithm.

cs.RO↗

Bayesian Meta-Learning for Few-Shot Policy Adaptation Across Robotic Platforms

Reinforcement learning methods can achieve significant performance but require a large amount of training data collected on the same robotic platform. A policy trained with expensive data is rendered useless after making even a minor change to the robot hardware. In this paper, we address the challenging problem of adapting a policy, trained to perform a task, to a novel robotic hardware platform given only few demonstrations of robot motion trajectories on the target robot. We formulate it as a few-shot meta-learning problem where the goal is to find a meta-model that captures the common structure shared across different robotic platforms such that data-efficient adaptation can be performed. We achieve such adaptation by introducing a learning framework consisting of a probabilistic gradient-based meta-learning algorithm that models the uncertainty arising from the few-shot setting with a low-dimensional latent variable. We experimentally evaluate our framework on a simulated reaching and a real-robot picking task using 400 simulated robots generated by varying the physical parameters of an existing set of robotic platforms. Our results show that the proposed method can successfully adapt a trained policy to different robotic platforms with novel physical parameters and the superiority of our meta-learning algorithm compared to state-of-the-art methods for the introduced few-shot policy adaptation problem.

cs.RO↗

Task Allocation and Coordinated Motion Planning for Autonomous Multi-Robot Optical Inspection Systems

Autonomous multi-robot optical inspection systems are increasingly applied for obtaining inline measurements in process monitoring and quality control. Numerous methods for path planning and robotic coordination have been developed for static and dynamic environments and applied to different fields. However, these approaches may not work for the autonomous multi-robot optical inspection system due to fast computation requirements of inline optimization, unique characteristics on robotic end-effector orientations, and complex large-scale free-form product surfaces. This paper proposes a novel task allocation methodology for coordinated motion planning of multi-robot inspection. Specifically, (1) a local robust inspection task allocation is proposed to achieve efficient and well-balanced measurement assignment among robots; (2) collision-free path planning and coordinated motion planning are developed via dynamic searching in robotic coordinate space and perturbation of probe poses or local paths in the conflicting robots. A case study shows that the proposed approach can mitigate the risk of collisions between robots and environments, resolve conflicts among robots, and reduce the inspection cycle time significantly and consistently.

cs.RO↗

Kimera-Multi: Robust, Distributed, Dense Metric-Semantic SLAM for Multi-Robot Systems

This paper presents Kimera-Multi, the first multi-robot system that (i) is robust and capable of identifying and rejecting incorrect inter and intra-robot loop closures resulting from perceptual aliasing, (ii) is fully distributed and only relies on local (peer-to-peer) communication to achieve distributed localization and mapping, and (iii) builds a globally consistent metric-semantic 3D mesh model of the environment in real-time, where faces of the mesh are annotated with semantic labels. Kimera-Multi is implemented by a team of robots equipped with visual-inertial sensors. Each robot builds a local trajectory estimate and a local mesh using Kimera. When communication is available, robots initiate a distributed place recognition and robust pose graph optimization protocol based on a novel distributed graduated non-convexity algorithm. The proposed protocol allows the robots to improve their local trajectory estimates by leveraging inter-robot loop closures while being robust to outliers. Finally, each robot uses its improved trajectory estimate to correct the local mesh using mesh deformation techniques. We demonstrate Kimera-Multi in photo-realistic simulations, SLAM benchmarking datasets, and challenging outdoor datasets collected using ground robots. Both real and simulated experiments involve long trajectories (e.g., up to 800 meters per robot). The experiments show that Kimera-Multi (i) outperforms the state of the art in terms of robustness and accuracy, (ii) achieves estimation errors comparable to a centralized SLAM system while being fully distributed, (iii) is parsimonious in terms of communication bandwidth, (iv) produces accurate metric-semantic 3D meshes, and (v) is modular and can be also used for standard 3D reconstruction (i.e., without semantic labels) or for trajectory estimation (i.e., without reconstructing a 3D mesh).

cs.RO↗

Online and Offline Robot Programming via Augmented Reality Workspaces

Robot programming methods for industrial robots are time consuming and often require operators to have knowledge in robotics and programming. To reduce costs associated with reprogramming, various interfaces using augmented reality have recently been proposed to provide users with more intuitive means of controlling robots in real-time and programming them without having to code. However, most solutions require the operator to be close to the real robot's workspace which implies either removing it from the production line or shutting down the whole production line due to safety hazards. We propose a novel augmented reality interface providing the users with the ability to model a virtual representation of a workspace which can be saved and reused to program new tasks or adapt old ones without having to be co-located with the real robot. Similar to previous interfaces, the operators then have the ability to program robot tasks or control the robot in real-time by manipulating a virtual robot. We evaluate the intuitiveness and usability of the proposed interface with a user study where 18 participants programmed a robot manipulator for a disassembly task.

cs.RO↗

An Earthworm-Inspired Multi-Mode Underwater Locomotion Robot: Design, Modeling, and Experiments

Faced with strong demand for robots working in underwater pipeline environments, a novel underwater multi-model locomotion robot is designed and studied in this research. By mimicking the earthworm's metameric body, the robot is segmented in the structure; by synthesizing the earthworm-like peristaltic locomotion mechanism and the propeller-driven swimming mechanism, the robot possesses unique multi-mode locomotion capability. In detail, the in-pipe earthworm-like peristaltic crawling is achieved based on servomotor-driven cords and pre-bent spring-steel belts that work antagonistically, and the three-dimensional underwater swimming is realized by four independently-controlled propellers. With a robot covering made of silicon rubber, the two locomotion modes are tested in the underwater environment, through which, the rationality and the effectiveness of the robot design are demonstrated. Aiming at predicting the robotic locomotion performance, mechanical models of the robot are further developed. For the underwater swimming mode, by considering the robot as a spheroid, an equivalent dynamic model is constructed, whose validity is verified via computational fluid dynamics (CFD) simulations; for the in-pipe crawling mode, a classical kinematics model is employed to predict the average locomotion speeds under different gait controls. The outcomes of this research could offer useful design and modeling guidelines for the development of earthworm-like locomotion robots with unique underwater multi-mode locomotion capability.

cs.RO↗

Stochastic Assignment for Deploying Multiple Marsupial Robots

Marsupial robot teams consist of carrier robots that transport and deploy multiple passenger robots, such as a team of ground robots that carry and deploy multiple aerial robots, to rapidly explore complex environments. We specifically address the problem of planning the deployment times and locations of the carrier robots to best meet the objectives of a mission while reasoning over uncertain future observations and rewards. While prior work proposed optimal, polynomial-time solutions to single-carrier robot systems, the multiple-carrier robot deployment problem is fundamentally harder as it requires addressing conflicts and dependencies between deployments of multiple passenger robots. We propose a centralized heuristic search algorithm for the multiple-carrier robot deployment problem that combines Monte Carlo Tree Search with a dynamic programming-based solution to the Sequential Stochastic Assignment Problem as a rollout action-selection policy. Our results with both procedurally-generated data and data drawn from the DARPA Subterranean Challenge Urban Circuit show the viability of our approach and substantial exploration performance improvements over alternative algorithms.

cs.RO↗